Inside Measurement - Page 19

Manufacturer: INSIZE Brand: INSIZE Model: 4208-1

Small hole gage set, 125 ~ 5 inch.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 155-121

Mitutoyo Telescoping Gage, Range: 5/16" to 1/2"

Manufacturer: PEC USA Brand: PEC USA

Standard for grinding and setting tools when cutting Acme threads. Range from 1 to 10 threads per inch. Angles and edges of gage are hardened, ground and carefully tested.

Manufacturer: INSIZE Brand: INSIZE Model: 7350-E07

Anvil for bore gages.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-480-030-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Starrett Brand: Starrett Model: 830C

This small hole gauge is well balanced tool that is ideal for accurately measuring small holes, slots, grooves, and recesses in all kinds of work. Accurate measurement is obtained by slightly "rocking" this gauge in the hole to be measured. This will guarantee contact at the true diameter. The final size is then obtained by measuring over the ball contacts with a micrometer.

Manufacturer: PEC Brand: PEC

Permits use in holes, slots and recesses. Half ball gages permit use in shallow holes, slots and recesses.

Manufacturer: Starrett Brand: Starrett Model: 579F

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-591 series telescoping gage is used for measuring the internal diameter of a bore or the width of a groove. A knurled lock retains setting of the measurement arm for sizing with a micrometer or caliper. The satin chrome finish resists rust and is glare-free. It comes assembled with a handle.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: PEC Brand: PEC

Plunger of gages expand from center, under spring tension, to size of hole being measured and is then locked in place by knurled knob. Measurement is made by a micrometer or a caliper.