Inside Measurement - Page 42

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-646-200-0

The Fowler 52-646-200 Dial Cylinder Bore Gauge has a measurement range of 2.6 to 7" and gradient spacing of 0.001". This direct-measuring gauge measures bores to a depth of 8". It uses a two-point contact system for the detection of geometry problems such as ovality and taper, and tungsten carbide contact tips provide high wear resistance.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Travel Tubular Inside Micrometers measure inside dimensions precisely and accurately. Features Carbide faced measuring tips are spherical to make positive point contact against the inside wall surface. Anvil and spindle are hardened and precision ground with microlap finish on ends. Spindle thread hardened, ground & lapped. Accuracy: .00036" Microfine graduations (.001") on a satin chrome finish permit easy reading. Positive locking nut Each micrometer can also be used as an adjustable linear standard bar within each range. Quick, easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs. It is recommended for optimal accuracy that the inside micrometer be calibrated by a gage blocks or ring gage.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-147

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ASIMETO Brand: ASIMETO Model: 242-20-1

Interchangeable Rod Type, 8" ~ 20" Rod Type Inside Micrometer Set, ASIMETO

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0051

HHIP digital electronic bore gages features zero reset allows absolute or comparative measurements extra large LCD, 360 degree rotation dual display: digital and electronic scale power supply: 3V CR2032 lithium battery true inch/mm conversion one button easy calibration product specifications: range: 40- 70" 10-18 mm; probe depth: 4"; no. Of anvils: 9.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-211

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise inside diameter (ID) measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Flexbar Brand: Flexbar

Polishing Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel; the largest variety of standards available for assessing and specifying - by symbol, the Degree of Roughness of machined parts including every machining method known.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0052

HHIP digital electronic bore gages features zero reset allows absolute or comparative measurements extra large LCD, 360 degree rotation dual display: digital and electronic scale power supply: 3V CR2032 lithium battery true inch/mm conversion one button easy calibration product specifications: range: 70- 1.5" 18-35mm probe depth: 6"; no. Of anvils: 9.

Manufacturer: Starrett Brand: Starrett Model: 700A

The Starrett 700 series internal groove vernier inside micrometer has caliper-type jaws and a vernier scale in inch units for taking precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel, with hardened and ground jaws for accuracy. A knurled friction thimble helps provide quick adjustment capability. The vernier scale is graduated to 0.001” and a locking clamp helps hold measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: INSIZE Brand: INSIZE Model: 3520-50E

Electronic inside micrometer, 1-2"/25-50mm.