Ground Resistance Meters - Page 12

Manufacturer: Megger Brand: Megger Model: 6320-245

The Megger 6320-245 professional ground test kit is a kit of accessories for conducting ground resistance tests with a Megger DET3 or DET4 ground resistance tester (sold separately). The kit includes 50m (164’) red and black cable reels, 30m (98’) yellow and green cable reels, 4m (13’) earth electrode leads, a 4mm shrouded plug and large croc clip, 4 auger-style spikes, fiberglass measuring tape, and a molded plastic carrying case that holds all of the accessories. The 6320-245 is an accessory for use with Megger DET3 and DET4 series ground resistance testers.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Peakmeter Brand: PEAKMETER

Product Features: Test voltage have 20V/48V Provide choice. 2 pole resistance measurement. 3 pole & 4 pole earth resistance measurement. 4 pole soil resistivity testing. Current Clamp selection method is used to measuring earth resistance without breaking grounding connection. Double clamp without auxiliary electrode is used to fast measuring grounding resistance. Auto and manual control the test frequency. Have 94 Hz,105Hz,111Hz,128Hz for frequency provide choice. Automatic frequency control (AFC) is automatically identified interference frequency and then selected the proper measurement frequency, so that reduced the affect of interference voltage. Automatically measuring the interference voltage and the leakage current. The limited value will be alarmed. Auto power off Clock display Double battery power supply and low battery indication Data storage: Can memorize up to 100 measuring values, and uploading to PC by USB2.0 interface. Product Specification: 3 Pole & 4Pole: Voltage: AC20/48V Frequency: 94Hz, 94Hz & 128Hz Resistance±(5%rdg + 5dgt): 0.1Ω-20KΩ R~2 Pole: Voltage: AC20V Frequency: 94Hz & 128Hz Resistance±(5%rdg + 5dgt): 0.1Ω-20KΩ Nosie Voltage range: ±1--±50V DC/AV ±(5%+5) Noise frequency range: 16Hz-400Hz ±(1%+10) Soil Resistivity: Voltage: AC20V/48V Frequeny: 94Hz/128Hz Rk: Voltage: AC20V/48V Frequeny: 94Hz/128Hz Range: 0.1-30 Ω Accuracy: ±(3%+10) Package include: 1*MS2306 Resistance testerKindly notice: As HYELEC is our old brand, and the new brand is PEAKMETER, but we still has the items which the brand is HYELEC, so the item we sent will include PEAKMETER and HYELEC, but please do not worry about it, we guarantee these item 2 logo are the same products.

Manufacturer: Megger Brand: Megger Model: 1000-365

The Megger DET4TC2 four-terminal ground resistance tester with clamps measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing. It can take measurements using the attached rod technique (ART), which tests on-site grounds without requiring the utility connection to be disconnected. It comes with a current clamp for measuring conductor current and electrode resistance and a voltage clamp for stakeless ground measurements, and when used with ART capability, the clamps can be used for taking fall of potential measurements. The clamps have two jaws that can accommodate a conductor up to 2.1" (52 mm) in diameter. The tester has a maximum resistance input of 200,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TC2 comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, four right-angle terminal adaptors, a field calibrator for measurement accuracy, and one voltage and one potential clamp. The tester's liquid crystal display (LCD) is backlit for readability in low light.The DET4TC2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The tester comes in a hard polypropylene case for transport and storage. The case has an ingress protection rating of IP54, meaning it protects against the ingress of dust and splashing water, making it suitable for outdoor use. The DE...

Manufacturer: Amprobe Brand: Amprobe Model: DGC-1000A

The Amprobe DCG-1000A clamp ground resistance tester is a ground resistance tester that measures ground resistance, current, and continuity in multi-grounded electrical systems. This true RMS (root mean square) meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform. The clamp-on head enables the user to measure resistance on a ground rod in a multi-ground system without the use of auxiliary ground rods and without disconnecting the other grounds. The unit does not require any additional electrodes or test leads. The tester measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A. It is safety rated to European Standard 61010-2-32 Category III 300V and Category II 600V. The four-digit LCD screen indicates values up to 9999. The unit is powered by one 9V batter (installed), which provides power for 3,000 measurements. The DCG-1000A is designed for use by electricians and electrical contractors. Specifications Power supply 9V battery (one, installed) Ground resistance range 0.025 to 1,500 ohms Current range 0 to 10A Weight (including battery) 1.4 lb./ 640g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-2-32 Cat III 300V and Cat II 600V Dimensions 10.1 x 3.9 x 1.9 inches /257 x 100 x 47mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test m...

Manufacturer: Megger Brand: Megger Model: 1000-345

The Megger DET4TC2 four-terminal ground resistance tester measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing. It can take measurements using the attached rod technique (ART), which tests on-site grounds without requiring the utility connection to be disconnected. The tester has a maximum resistance input of 200,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TC2 comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, and four right-angle terminal adaptors. The tester's liquid crystal display (LCD) is backlit for readability in low light. It can be used with current and voltage clamps (not included) for stakeless ground measurements in areas where stakes cannot be driven and for taking fall of potential measurements when used with ART capability.The DET4TC2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The tester comes in a hard polypropylene case for transport and storage. The case has an ingress protection rating of IP54, meaning it protects against the ingress of dust and splashing water, making it suitable for outdoor use. The DET4TC2 operates on eight 1.5V alkaline AA batteries (included). A low-battery indicator signals when the batteries need to be replaced.SpecificationsMaximum ground resistance input200,000 ohmsMaximum ground voltage i...

Manufacturer: AEMC Brand: AEMC Model: 6471 Kit-300ft

The AEMC 6471 multi-function digital ground resistance tester with AC current probes and 300 ft. leads performs 2-clamp testing, 2- and 4-wire bond resistance testing, 3- and 4-point ground resistance testing, ground coupling, selective ground resistance, and soil resistivity testing in rugged conditions, such as field maintenance with numerous tests. The tester is designed for ease of use with “connect–press–read” operation, a large easy-to-read LCD screen, and user alerts. For higher accuracy in electrically noisy environments, the tester can be operated in manual or automatic frequency scan mode from 41 to 513Hz. Test voltage of 16V or 32V can be selected up to 250 milliAmp (mA) test current. The tester automatically recognizes all electrode connections and their resistance value. The auto power-off feature turns off the tester after a set period for power management. The tester’s software (included) is compatible with Microsoft Windows XP, Windows Vista, Windows 7, and Windows 8. It enables remote set-up and operation of all measurements, and provides data storage, real-time display, analysis, report generation, and system configuration. Up to 512 complete test results can be stored in memory for recording data in the field and then analyzing readings when convenient. After taking measurements, reports are automatically generated. The AEMC 6471 exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. The double-insulated tester is compliant with grounding standards IEC 61557 parts 4 and 5. Safety ratings include EN 61010-1, CAT IV 50V, and pollution degree 2. When closed, the carrying case has an IP 54 rating that protects the instrument from dust and water. The tester kit includes two current probes (clamps), two 300ft. color-coded leads on spools (one red, one blue), two hand-tied 100ft. leads (one green, one black), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, 100ft. tape measure, DataView software, rechargeable NiMH batte...

Manufacturer: COLE-PARMER Brand: AEMC

The Digital Ground Resistance Tester Model 6472 is a portable measurement instrument designed to measure Bond Resistance, Ground Resistance (with and without clamps), Soil Resistivity, Earth Coupling, Step & Touch Potential. When used in combination with the GroundFlex® Adapter Model 6474 (factory supplied product only), Power Transmission Tower and Tower Leg Ground Resistance testing is also available. The Model 6472 measures from 0.01 to 99.99kÙ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. The adjustable test frequency (either manual or automatic) from 40 to 5078Hz test voltage provides rejection of high levels of interference, allowing it to be used under difficult conditions such as the presence of high stray currents that normally affect accuracy. Up to 512 test results can be stored in internal memory for later recall to the display or downloaded to a PC using DataView® software (included) for Automatic Report Generation, Automatic Fall-of-Potential Plot Generation, Frequency/Resistance Plots and much more. What's Included: Rechargeable NiMH batteries, optical USB cable, power adapter 110/240V with power cord 115V US, DataView software, and manual. KIT also includes: two 150 to 500 ft (depending on catalog #) color-coded leads on spools (red/blue), two 100 ft color-coded leads (hand-tied, green/black), one 30 ft lead (green), four T-shaped auxiliary ground electrodes, set of five spaded lugs, one 100 ft AEMC® tape measure, and carrying bag. Measure ground resistance , soil resistivity, and bonding resistance with one instrument 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation 3-Point Fall-of-Potential measurement 3-Point earth coupling measurement Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments Earth coupling testing

Manufacturer: AEMC Brand: AEMC Model: 2135.46

The AEMC 2135.46 calibration loop is used to perform a quick check of ground resistance testers. The calibration loop is a replacement component for use with AEMC clamp-on ground resistance tester models 3710, 3711, 3730, and 3731. Capacity is 25 ohms. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

Manufacturer: AEMC Brand: AEMC Model: 2130.6

The AEMC tape measure is designed specifically for use with ground resistance testers. Length of the tape measure is 100 feet. The tape measure housing includes a handle with a rubber grip and a hand-crank for rewinding the tape measure. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

Manufacturer: Megger Brand: Megger Model: 250575

The Megger 250575 three-piece test lead set includes three test leads and is for use with the Megger 250302 ground resistance tester. The test leads are color-coded to help ensure proper connection.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.