Ground Resistance Meters - Page 13

Manufacturer: Vetus Brand: ETCR

Specifications Function：Ground resistance test, Loop resistance test Power Supply：6VDC (4 PCS of AA alkaline batteries) Resistance Range:0.01-1200Ω Resistance Resolution:0.001Ω Highest Resistance Accuracy:±1%±0.01Ω Current range:0.00mA-20.0A Current resolution：0.05mA Maximum current accuracy：±2.5%±1mA Data memory:99 Sets Alarm Threshold Setting Range:Resistance: 1-199Ω Alarm Sound and Light："Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. Interference Signal Recognition："Beep-beep-beep" tone, NOISE symbol blinking Working Temperature and Humidity：-20℃-55℃;20%RH-90%RH LCD Screen：4 Digits LCD display, Screen L×W: 47mm×28.5mm Clamp Size：65mm×32mm Clamp Opening Extent：32mm Tester Weight：1160g (With batteries)(But battery not included in the package) Clamp Dimension：L×W×T: 285mm×85mm×56mm Protection Level：Dual Insulation Structural Feature：Clamp CT Shifting：Automatic shifting External magnetic field：

Manufacturer: Megger Brand: Megger Model: VCLAMP

The Megger VCLAMP voltage clamp is a voltage-inducing clamp for performing ART method ground resistance tests with a Megger DET4TC2 or DET4TCR2 ground resistance tester (sold separately). The kit includes the clamp, a calibration check PCB for two-clamp measurements, and a connecting lead. The VCLAMP is used by electricians and electrical contractors to conduct ART method ground resistance tests. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Vetus Brand: ETCR

Specifications Function：Ground resistance test, Loop resistance test Power Supply：6VDC (4 PCS of AA alkaline batteries) Resistance Range:0.01-1200Ω Resistance Resolution:0.001Ω Highest Resistance Accuracy:±1%±0.01Ω Current range:0.00mA-40.0A Current resolution：0.05mA Maximum current accuracy：±2.5%±1mA Data memory:99 Sets Alarm Threshold Setting Range:Resistance: 1-199Ω Alarm Sound and Light："Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. Interference Signal Recognition："Beep-beep-beep" tone, NOISE symbol blinking Working Temperature and Humidity：-20℃-55℃;20%RH-90%RH LCD Screen：4 Digits LCD display, Screen L×W: 47mm×28.5mm Clamp Size：65mm×32mm Clamp Opening Extent：32mm Tester Weight：1160g (With batteries)(But battery not included in the package) Clamp Dimension：L×W×T: 285mm×85mm×56mm Protection Level：Dual Insulation Structural Feature：Clamp CT Shifting：Automatic shifting External magnetic field：

Manufacturer: AEMC Brand: AEMC Model: 2135.37

The AEMC 2135.37 kit provides the accessories needed for setup and teardown in the field when performing 4-point ground resistance testing with an AEMC meter (sold separately). The leads are color-coded according to length. The kit includes two 500ft. leads on spools (one red, one blue), two 100ft. hand-tied leads (one green, one black), one 30ft. lead (green), two 5ft. leads (one red, one blue), four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100ft. tape measure, and a carrying bag. The tape measure housing has a hand-crank for rewinding the tape after use and a handle with a rubber grip. The kit includes a carrying bag that holds all of the accessories, keeping them organized and available when needed. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA. What’s in the Box? AEMC Ground Test Kit for 4-point testing (2) 500ft. leads on spools (red/blue) (2) 100ft. leads (green/black) 30 ft. lead (green) (2) 5ft. leads (red/blue) (4) 14.5" T-shaped auxiliary ground electrodes (5) Spaded lugs 100ft. AEMC tape measure Carrying bag

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

The GEOHM C is a battery powered earth resistance measuring instrument that is ideal for the measurement of soil resistivity. It is a compact, handy, and menu-driven soil resistivity measuring instrument for 3 and 4-wire connections. The tester includes continuous monitoring of interference voltage with indication if allowable limit values are exceeded. All values are available on a large LCD display, and operation is easy with the use of 4 keys. Measurement of earth resistance for 3 and 4-wire methods, with physical considerations of the potential gradient area as related to dissipation resistance of grounding systems of various sizes. Measurement of soil resistivity with geologic analysis and calculation of dissipation resistance.

Manufacturer: Megger Brand: Megger Model: DET3TC

The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties...

Manufacturer: Fluke Corporation Brand: Fluke Model: 65157MM-AMZN

The Fluke 1587 mdt advanced insulation and motor drive troubleshooting Kit is designed for troubleshooting and preventive maintenance applications including three-phase motors, cables, switch gear, and in applications where testing is required without the need to break the circuit. The Kit includes the Fluke 1587 Digital insulation Multimeter, Fluke I400 current clamp, and Fluke 9040 phase rotation indicator.

Manufacturer: AEMC Brand: AEMC

The Ground Resistance Tester Model 6417 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test it. The Model 6417 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Three new features unique to AEMC® are: Test frequency selection provides more accurate results in inductive environments Touch voltage indication  indicates the voltage on the display along with a warning buzzer when the voltage derived from current and resistance measurements detect a potentially dangerous touch condition Loop resistance indication alerts the user to the fact that the measurement may not be ground resistance The Ground Resistance Tester Models 6416 and 6417, measure ground rod and grid resistance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting the ground system under test or de-energizing them. The Models 6416 and 6417 simply clamp around the ground conductor or rod and measure the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Two new features unique to AEMC ® are test frequency selection and touch voltage indication. The ability to select the test frequency provides more accurate results in inductive environments

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162BN

The Fluke EI-162BN split core clamp-on transformer allows the Fluke 1623 or Fluke 1625 earth ground tester to take ground loop resistance measurements around transmission line pylons. The split core transformer makes it possible to measure individual resistances for each tower leg without disconnecting ground leads, overhead static wires, or ground wires. The transformer has 1,000 windings, with connections at winding ratios of 1,000, 500, 300, 200, and 0 available to set before use with meter for minimum measuring and maximum parasitic currents expected to flow through the transmission line pylon. The inside diameter of the clamp is 320mm/12.6 inches. The split core transformer includes two fasteners for holding the transformer halves together, a cable bobbin with two 12m/40ft. test leads for connecting the transformer to the tester’s jack, contact clamp, user manual, and a carrying case. If the user owns the non-kit version of the Fluke 1623 or 1625 ground resistance meter, the split core transformer also requires use of a Fluke 2539195 probe cable (sold separately). The Fluke E1-162BN is manufactured in compliance with DIN ISO 9001 quality assurance system. Specifications Transformation ratios 1:1000, 1:800, 1:500, 1:300, and 1:200 Temperature range -10 degrees to 50 degrees C/14 degrees to 122 degrees F Weight 4.9kg/11lb. Dimensions 377mm/15 inches outside diameter, 310mm/12 inches inside diameter, 30mm/1.25 inches depthGround-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with high moisture content can degrade ground rods and connections in existing systems and increas...

Manufacturer: Ideal Industries Brand: Ideal Industries Model: 61-796

The Ideal 61-796 earth ground tester performs 2-point and 3-point fall-of-potential or simplified ground resistance testing when it is not possible to use auxiliary ground stakes, and measures ground voltage for new and existing buildings, structures, equipment, and electrical systems. The auto-ranging feature automatically determines the correct value range for the measurements. The data hold function with screen icon allows the user to retain the measurements on the display for manual recording. The battery indicator alerts the user when batteries are low to ensure accurate measurements. When in use, the 2 milliAmp (mA) measuring current does not trip ground fault breakers of the circuit under test. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The Ideal 61-796 tester comes with a set of three test leads, two auxiliary earth spikes, a simplified measurement probe, a hard carrying case, and an instruction manual. Applicable safety standards are IEC/EN 61010-1 and Installation CAT III 200V. The meter is rated for use at pollution degree 2. Specifications Earth resistance ranges and resolutions 0 - 20Ω range (0.01Ω resolution); 0 - 200Ω range (0.1Ω resolution); 0 - 2000Ω range (1Ω resolution) Earth resistance accuracy + or - 2% reading + 2 digits or + or - 0.1Ω Maximum earth voltage 0-200V AC, 40-500Hz Earth voltage accuracy + or - 1% reading + 2 digits Operating humidity 80 percent Operating temperature 32 to 104 degrees F Power source (8) 1.5V AA batteries (included) Weight 1361g/3lbs. (including batteries) Dimensions 210 x 210 x 100mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and cl...