Motion, Speed & Force - Page 155

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 5

Series 5 Advanced Digital Force Gauge with 5/16-18M UNC Load Cell Thread, 500 lbF / 8000 ozF / 250 kgF / 2500 N / 2.5 kN Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 2,000 lbF (0.5 N to 10 kN). The gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is 0.1% of full scale, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges' many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. Includes: Carrying case chisel cone V-groove hook flat extension rod universal voltage AC adapter battery quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5's averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulate

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 5

Series 5 Advanced Digital Force Gauge with #10-32M UNF Load Cell Thread, 0.5 lbF / 8 ozF / 250 gF / 2.5 N / 2500 mN Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 2,000 lbF (0.5 N to 10 kN). The gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is 0.1% of full scale, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges' many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. Includes: Carrying case chisel cone V-groove hook flat extension rod universal voltage AC adapter battery quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5's averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates con

Manufacturer: Cedar Brand: Cedar

The DID-05 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 4.5 lb-in Capacity, 0.020~4.500 lbf-in Measuring Range is a torque measuring manual screw driver designed for lab and production use. This product includes a ISO-17025 Calibration Certificate. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1-SV-USB software. The DID-05 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 4.5 lb-in Capacity, 0.020~4.500 lbf-in Measuring Range is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratchet clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.The DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Manufacturer: AWS Brand: AWS

The AWS TT-QC-150f-1/2 Digital Torque Tester, Range 15 - 150 Lb-ft, Drive Size 1/2 in is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: Cedar Brand: Cedar

The Cedar DIS-IP200 Digital Torque Tester with Flanged Remote Sensor, Capacity 1740 lbf-in/ 145 lbf-ft/ 20 kgf-cm/ 200 N-m, 220V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Mark-10 Brand: Mark-10

The CTA100 Cap Torque Tester With Data Output, Cap 100 lb-in / 1150 kg-mm / 1150 N-cm, 220V is a simple, accurate, and economical solution for manual cap torque testing. This Cap Torque Tester is ideal for lab or production use for closure manufacturers, bottlers, food and beverage companies, and others. The cap torque tester captures peak readings for application and removal torques. Data output via RS-232 and Mitutoyo enable reporting and analysis of test data via PC or other data collector. Adjustable posts effectively grip a broad range of container shapes and sizes, while a set of flat rubber-edged jaws are available for unique profiles. Innovative mechanical overload protection provides peace of mind.

Manufacturer: AWS Brand: AWS

The AWS ITIO-10 Torque Transducer with Intergrated Bench Stand, Range 1 - 10 Oz-in, Drive Size 1/4 in is designed to work with the torque analyzers and data collectors, these high-strength aluminum integrated bench stands mount directly to a bench-top. Optional over-torque protection rings prevent accidental transducer overload on smaller transducers.

Manufacturer: AWS Brand: AWS

The AWS RDFA-2500 2500 Lb-ft Rundown Fixture 1.5 inch male to 1.5 inch female is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Manufacturer: Mark-10 Brand: Mark-10 Model: MR53-20Z

Series R53 smart sensors measure bi-directional (application and removal) bottle cap torque and other applications in the food and beverage, cosmetics, consumer products, and other industries. Adjustable posts accommodate a range of sample sizes, while alternative gripping attachments (high capacities only) accommodate unique shapes. Capacities available from 10 ozFin to 100 lbFin [7 to 1150 Ncm]. Compatible with Mark-10 model 5i and 3i indicators (sold separately) through unique Plug & Test technology.

Manufacturer: Checkline Brand: Checkline Model: TT-3011

Range: 1.000 - 10.00 Lb-inDrive Size: 1/4"Run-Down Fixture: IncludedThe TT-3000 Series Torque Analyzers are designed specifically for the needs of today's production facilities. These powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.