Motion, Speed & Force - Page 156

Manufacturer: Checkline Brand: Checkline Model: TT-3015

Range: 15.00 - 150.0 Lb-inDrive Size: 1/4"Run-Down Fixture: IncludedThe TT-3000 Series Torque Analyzers are designed specifically for the needs of today's production facilities. These powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.

Manufacturer: Mountz Brand: Mountz

The Mountz SDX50i High Precision Digital Torque Screw DriverTransducer, Range 5 - 50 lbf-in is used for auditing or tightening fasteners to a specified torque when mated with a torque analyzer. Ergonomic rubber grip and stainless steel Female/Hex bit holder. Features instant auto-recognition of the SDX when connected to the LTT or PTT. Connect to a torque analyzer to monitor, test or audit a fastener.

Manufacturer: Imada Brand: Imada

The Imada HTGS-85 Digital Torque Gauge with Programmable Setpoints, Capacity 85.00 ozf-in is a precision instrument that offers programmable high/low set-points for go/no-go testing. ORANGE lights up for measurements less than Low set-point, GREEN for between High and Low set-point, and RED for over High set-point. Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.

Manufacturer: Mountz Brand: Mountz

BMX50F Torque Sensor (5-50 lbf.ft) ARCII

Manufacturer: Mountz Brand: Mountz

BMX40z Torque Sensor (4-40 ozf.in) ARCII

Manufacturer: COLE-PARMER Brand: Mark-10

Easily measure tensile or yield strength, compression, fatigue, impact, strain, and material ductility with this single-column, motorized, horizontal, push/pull test stand. The modular design allows the addition of control and measurement options to fit your testing needs. Base control features include programmable test speeds from 0.5 to 13 in/min (13-330 mm/min), up/down/stop directional control over an 18" travel distance, travel limit switches, emergency stop, and password protection. Control capabilities may be expanded with add-on functions, so you may configure the test stand to your application needs. Add-on functions include travel measurement and output, cycling, preload, load holding, an expanded speed range of 0.02 to 45 in/min (0.5 to 1100 mm/min), and break detection - to name a few. The unique FollowMeTM add-on function responds directly to manual pushing and pulling made to the gauge shaft or load cell to increase speed and offers quick setup and positioning. A complete options package is also available and includes all add-on functions and cables required for their use. This motorized test stand pairs with the Mark-10 Series 5 and 7 force gauges (required for use). Please see page ### for more information on the compatible force gauges. What's Included: One 5" (12.7 cm) extension rod, two hooks (small and medium), one 10-32 threaded coupler, one 2" (51 mm) diameter compression plate, Allen wrench set, resource CD, and force gauge mounting hardware. Modular tension and compression test stand - configurable to your application needs Handles force loads up to 300 lbF (1.5 kN) - ideal for research and development, laboratory, and production environments Control the stand from the control panel or remotely via PC and ASCII commands Standard options include programmable test speed, emergency stop, and password protection Compact and ergonomic design fits perfectly on workbenches Force gauge required and sold separately

Manufacturer: Fluke Corporation Brand: Fluke Model: 3542635

Fluke 810 vibration tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands. You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let al1 be proactive about mechanical maintenance. Fluke 810 Vibration Tester puts you 1 step ahead by using a simple step-by-step process to report on machine faults the first time measurements are taken, without prior measurement history. The combination of diagnoses, severity and repair recommendations help you make informed maintenance decisions and address critical problems first. On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime. Viewer PC Software expands data storage and tracking capacity. Troubleshoot problem equipment and understand the root cause of failure. Survey equipment before and after planned maintenance and confirm the repair. Provide quantifiable proof of equipment condition and drive investment in repair or replacement. Prioritize and plan repair activities and operate more efficiently. Train new or less-experienced technicians and build confidence and skill across the team. Includes: vibration tester with diagnostic technology, tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cable, laser tachometer and storage pouch, smart battery pack with cable and adapters, shoulder strap and adjustable hand strap, viewer PC software, mini USB to USB cable, getting started guide, illustrated quick reference guide, users manual CD-ROM and carrying case.

Manufacturer: Shimpo Brand: Shimpo Model: CONE

Cone adapter. Size: 1/2" diameter. Cone tip adapter comes standard with all handheld tachometers.

Manufacturer: DINGYU Brand: DINGYU

Manufacturer: LYWS Brand: LYWS

Power requirement: DC 8-15V Measure range : 5-9999RPM. Clear zero: Automatic. Clear zero time: about 10s.the greater the RPM value,the longer the clear zero time. Refresh frequency: 0.2-0.5S while 120-1200RPM;0.25-0.06S while 2400-9999RPM. Measure indication:RPM5000,±3. Display:RED 0.56" LED Sign:Pusle signal,Hall NPN 3 wires normally open. Hall proximity model:NJK-5002C Appearance:M12mm cylinder. Detection range: 10mm Proximity output current: 200mA Detected objects: magnet Response frequency: 100HZ Tachometer dimension:72x36x20mm,panel cutout Dimension:68x33mm. Sensor dimention: M12x10x55mm. Wiring: (Sensor's Brown + Meter's Red) + Power Positive. (Sensor's Blue + Meter's Black) + Power Negative. (Sensor's Black + Meter's Yellow) = Signal terminal. Operating temperature: 0 to 50°C. Packaging include： 1x Tachometer 1x Hall NPN proximity sensor w/ magnet