Pressure & Vacuum Gauges - Page 164

Manufacturer: Dwyer Instruments Brand: Dwyer Model: SFI-500B-2

Tough, tempered glass window resists chemical attack and abrasion. Seamless gasket assures perfect seal and is easily field replaceable. In addition to the standard brass body, Model 500 Sight Windows are also available in carbon steel or 316 stainless steel to suit a wide range of chemical compatibility.

Manufacturer: Winters Brand: Winters Instruments Model: SSP545

The Winters SSP series schedule 40 brass syphon has a seamless 180-degree coil, and a male connection with either 1/4" or 1/2" NPT rate, and operates in pressures up to 500 psi (3,447 kPa) at 680 degrees F (360 degrees C). The syphon, also known as a siphon, is brass for operating in non-corrosive liquid and gases, and is seamless for additional strength. The male connection is either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. This syphon prevents hot steam from entering a pressure gauge, diaphragm seal, or transmitter in applications with temperatures above 100 degrees F (37 degrees C). Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.Winters Instruments manufactures pressure gauges, thermometers, diaphragm seals, pressure transmitters, and switches. The company, founded in 1953, is headquartered in Toronto, Canada.

Manufacturer: Guardair Brand: Guardair Model: 80LJ012SA

(1) Whisper Jet With 12" Steel Ext & Alum Nozzle

Manufacturer: Yosa Brand: Yosa

Item specifics Item Length:2 inch Item Width:2 inch Item Height:2 inch Item Weight:0.3 kg Item Diameter:2 inch Material Type:ABS Plastic Product Description: Diameter:2"/52mm Current:IGN MAX 0.3A ILM 0.3A Power:DC(10-15V) 12V Professional LED super white display. Red LED illuminated needles. Smoke tint lens during the day,Clear and bright LED Display during the night. Add a racing look and feel to your ride,High quality and light weight. Comes with Mounting and Installation hardware. Easy Installation With Users Manual In English,Professional Installation is Highly Recommended. 52mm Gauge Pod: Universal Pod made with black ABS Plastic Pod can hold all 52mm (2 inch) gauges Pod holder can be position on your dash, any little flat surface, use as a starter mold for your fiberglass work or mount it on your roof for overhead look (6cm width x 8cm depth) Package : 1 x Vacuum Gauge 1 x Plastic Pipe 1 x Users Manual In English 1 x 52mm Black Pod

Manufacturer: CME Tools Brand: CME Tools

10 pairs 1/8" thickness precision steel parallel set. All 6" long. Made of high quality hardened steel. Precision ground. Within 0.0002" in parallelism. Paired 0.0002" in height Inluding 1 pair of the following heights: 1/8 x 1/2--------13/64hole 1/8 x 5/8--------1/4 hole 1/8 x 3/4----------5/16 hole 1/8 x 7/8 ----------5/16 hole 1/8 x 1--------------5/16 hole 1/8 x 1-1/8---------3/8 hole 1/8 x 1-1/4---------3/8 hole 1/8 x 1-3/8---------3/8 hole 1/8 x 1-1/2---------1/2 hole 1/8 x 1-5/8---------1/2 hole Fitted in deluxe plastic box.

Manufacturer: CME Brand: CME Tools

Semi-finished threaded back plate for 8" lathe chuck. Diameter: 8" Thickness: 7/8" Thread: 1-1/2"-8

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50702432

The WIKA Commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in an acrylonitrile butadiene styrene (ABS) plastic case for durability in high-impact environment. The gauge measures pressure up to 5,000 psi. It is accurate to a variety of percentages across the entire range of the gauge, depending on other features. Accuracy ranges are + or - 2.5 percent of span; or, + or - 3/2/3 percent of span over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) Grade B accuracy class. The male connection is available as either a lower mount, a center back mount, or a U-clamp mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for general applications in non-corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temp...

Manufacturer: TanNen technology Brand: TanNen technology

1.Overview Shore durometer is used to test hardness of sulfureted rubber and plastics, such instrument has A-type/D-type/C-type. A-type and D-type apply to test the low and medium level hardness and high level hardness of materials. C-type applies to test the hardness of shoe-making porous materials made by vesicants within plastics when the compression rate is 50% and stress is beyond 0.049MPa. 2.Main parameters Dial value:1-100 degree Pointer journey:0-2.5mm Stress at the end of pointer:0.55N-8.06N of A-type and C-type;0-44.5N of D-type 3.Operation instructions Put the sample on a solid plane,hold the durometer to make the pointer at least 12mm away from the sample edge,and stably put the legs of durometer on the sample.Thus the pointer straightly goes into the sample till the legs completely get to the sample.Check the reading in 1s.Repeat shuch test 5 times at different place which are at least 6mm away from the test point and find the average reading(the distance between porous materials is at least 15mm).

Manufacturer: Generic Brand: Diybrother Model: CT-MC-260G-R134A

Features HVAC R134a Aluminum Air Conditioner Manifold Gauge; Large 2 3/4" Diameter Easy-to-read, Dual Gauges; Manifold with Built-in Sight Glass; High Pressure or Low Pressure is Selectable; Pressure in PSI; Extra Large Easy to Read Color Coded Dials; Rubber gauge covers for added protection Aluminum Alloy Testing Manifold Body; High Impact Pop-in Lexan Lens; A heavy Duty Hook for Hanging the Gauges; No-flutter Gauge Design; Brass Connection. Package Included 1 x sight glass Aluminum testing manifold 3 x Charging Hose 2 x QC -019L& QC-19H quick couplers 1 x Hand carrying case 1 x User Manual

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF462-250-NT

Cf462 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.