Pressure & Vacuum Gauges - Page 168

Manufacturer: Winters Brand: Winters Model: PCC1021C

The Winters PPC series pressure gauge with brass wetted parts has a liquid-fillable circular dial enclosed in a PBT case and a lower mount male connection with 1/4" NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 1%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The chemical-resistant PBT (polybutylene terephthalate) case is color-coded for ease of process identification. The case comes in four different colors that are UV resistant and will not fade. The case is Ingress Protection certified IP65 for protection against solid objects including dust or liquids. The circular dial is 4" (100 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The dial has an aluminum anodized black pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The ring for the gauge is also PBT and the bourdon tube is phosphor bronze. The movement consists of OT59 brass gears and stainless steel 304 plates. The welding is a tin/copper alloy for pressures below 600psi (4,147kPa), and is a silver alloy for pressures 600psi (4.147kPa) and above. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for machinery, process lines, compressors, and hydraulics with heavy vibration and pulsation.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments,...

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-7433 Color: Stainless

Duro Pressure Gauge is 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5-Inches dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2-Inches male NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel. Quality made in USA.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF675-400-RT

Cf6.75 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF675-000-RT

Cf6.75 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1211-120

The Dwyer 1211 series slack-tube roll-up manometer measures static, vacuum, and differential pressure of air and gas in fan and blower tests, gas pressure evaluation, and calibration applications. The manometer has an acrylic plastic top, connectors, and over-pressure traps for use with testing air and gas, and vinyl tubing for use with mercury (sold separately) or water with fluorescein green concentrate (sold separately). The manometer is calibrated in inches of water using water and is suitable for use with mercury or water with fluorescein green concentrate measuring fluids (sold separately). The connectors accept 1/8" tubing and can be turned to seal the fluids during storage or transport. The flexible spring-steel scale is mounted between the columns to eliminate parallax reading errors, and the 2" sliding zero adjustment provides zeroing capability. The manometer has a maximum intermittent total pressure of 50psi and vacuum up to 20 inHg. The manometer can be hung or mounted using the attached magnets.SpecificationsPressure typesStatic, vacuum, and differentialMedia typeAir and gasWetted parts materialAcrylic plasticCase materialVinyl tubingScaleInches of water, inches of mercuryPressure rangeVariesFluid typeWater colored with green concentrate or mercuryConnection1/8"MountMagnetic clipsMaximum pressure50psi, intermittentlyMaximum vacuum20" Hg (10" Hg absolute), intermittentlyMaximum temperature130 degrees FH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an abso...

Manufacturer: SUNBELT Brand: Sunbelt

NEW SUNBELT 52120W008G4 50-300F 5 IN 1/2 IN NPT TEMPERATURE GAUGE D521940

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50334603

The WIKA brass adjustable throttling snubber has an adjustable needle valve to restrict flow under varying operating conditions, a temperature rating of 14 to 248 degrees F (-10 to 120 degrees C), a male x female connection with either 1/4" or 1/2" NPT rate, and operates under pressures up to 3,400 psi. The brass wetted parts are for use with non-corrosive liquid and gas pressure. The adjustable stainless steel needle valve restricts flow under operating conditions with variable pressure. The snubber has a nitrile rubber O-ring for a tight seal. It operates under pressures up to 3400 psi, and is effective for applications with pressures above 5 psi. The snubber measures 2.4" (6 cm) high and 1" (2.5 cm) in diameter and has a temperature rating of 14 to 248 degrees F. Pressure gauge snubbers suppress the effects of pressure pulses and pressure peaks to increase the service life of pressure gauges in harsh applications, such as on reciprocating pumps and compressors, hydraulic presses, or fluid power systems, and improve the reading accuracy of the gauge. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mou...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616C-1

Series 616C Transmitter features an exceptional 1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.

Manufacturer: OTC Brand: OTC

Part of 205-S127Applications: 7.5 Inch, 7.5 Inch Limited SlipVehicles: Ranger, Mustang, E-SeriesOTC 205-125 Adapter for 205-S127 Ford Drive Pinion Depth Gauge

Manufacturer: CME Brand: CME Tools

MADE OF STAINLESS STEEL. DISPLAY UP TO 12"/300MM . With Fine Adjustment Device. * X-LARGE LCD SCEEN. * ON/OFF, MM/INCH, TOLERANCE SET, ZERO SET, ABS, HOLD BUTTONS. * 0.0005"/0.01MM GRADUATION * Carbide Tipped Scriber. * REMOTE DISPLAY OUTPUT. * Ground and Micro-Lapped Base. * QUESTIONS? E-MAIL: [email protected] Tel: 1-800-254-0007 Cel#:248-207-9813