Pressure & Vacuum Gauges - Page 165

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF462-300-NT

Cf462 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 301LFW-254C

300 series gauge line is a high quality line of Glycerin filled gauges. The Dry filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which will extend the life of the gauge. This gauge has been specifically designed with original equipment manufacturers in mind. It is typically used in chemical processing or food processing applications as well as any commercial or industrial application where stainless steel components are required.

Manufacturer: CME Brand: CME Toola

2" x 3" x 4" precision block pair- NEW MADE OF HARDENED STEEL, TOP QUALITY HARDNESS: HRC56 TO 60 SQUARE AND PARALLEL TO ACCURACY: 0.0002" HARDENED AND PRECISION GROUND Check out my other items! My Stores Logo www.cme-tools.com

Manufacturer: Ralston Instruments Brand: Ralston Instruments Color: Silver

Ralston QTQTHOS6FT Quick-test Hose (6 ft), Brass Hose Ends.|Hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2060

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1211-16

The Dwyer 1211 series slack-tube roll-up manometer measures static, vacuum, and differential pressure of air and gas in fan and blower tests, gas pressure evaluation, and calibration applications. The manometer has an acrylic plastic top, connectors, and over-pressure traps for use with testing air and gas, and vinyl tubing for use with mercury (sold separately) or water with fluorescein green concentrate (sold separately). The manometer is calibrated in inches of water using water and is suitable for use with mercury or water with fluorescein green concentrate measuring fluids (sold separately). The connectors accept 1/8" tubing and can be turned to seal the fluids during storage or transport. The flexible spring-steel scale is mounted between the columns to eliminate parallax reading errors, and the 2" sliding zero adjustment provides zeroing capability. The manometer has a maximum intermittent total pressure of 50psi and vacuum up to 20 inHg. The manometer can be hung or mounted using the attached magnets.SpecificationsPressure typesStatic, vacuum, and differentialMedia typeAir and gasWetted parts materialAcrylic plasticCase materialVinyl tubingScaleInches of water, inches of mercuryPressure rangeVariesFluid typeWater colored with green concentrate or mercuryConnection1/8"MountMagnetic clipsMaximum pressure50psi, intermittentlyMaximum vacuum20" Hg (10" Hg absolute), intermittentlyMaximum temperature130 degrees FH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an abso...

Manufacturer: TanNen technology Brand: TanNen technology

Package included: 1 x Digital Shore Hardness Durometer TYPE A 1 x Hard carrying case with hardened foam 1 x English Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO EARTH STAKE

The Fluke GEO earth stake is used with Fluke 1623 and 1625 earth ground testers to measure the ability of the earth ground system or individual electrode to dissipate energy from the site. The auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp. The stake has a corkscrew end to bore into the ground. The Fluke GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: JH Gauge Brand: JH Gauge

DIFFERENTIAL PRESSURE GAUGE 0-10 INCH W.C.

Manufacturer: JH Gauge Brand: JH Gauge

DIFFERENTIAL PRESSURE GAUGE 0-0.25 INCH W.C.