|
|
-
4.1 of 5.0 with 11 Reviews
SALE PRICE: $79.90 1% OFF
Manufacturer: SINOCMP
Brand: SINOCMP
Model: EX120-3 EX120-5
Manufacturer: SINOCMP
Brand: SINOCMP
Model: EX120-3 EX120-5
|
SINOCMP Pressure Sensor 4254563 for Hitachi EX120-3 EX120-5 Excavator PartsProduct Specification: 1. Part Number: 42545632. Application Model: EX120-3 EX120-53. Warranty: 3 months4. Package: standard retail carton or customer require Advantage: 1. Specialized in excavator spare parts for more than 4 years. 2. 100% quality assurance, develop and manufacture follow original ones. 3. All products have warranty, Monitor and Controller have 1 Year Warranty. 4. Quick response within 24 hours. 5. Excavator spare parts in full-scale are available. 6. Small order allowed. 7. Original packing, neutral packing or customized packing. 8. Positive customer feedback from abroad market. Shipping detail: 1. United States: 5-8 working days. (If urgently,please contact us, we can send you by expedited shipping,it need about 3-5 working days.) 2. Other Country: 7-15 working days. EMS will be need more days. 3. Item will be shipped 1-2 working days after payment received. We only ship to the confirmed address given on Amazon. Please make sure the address is correct. 4. Please leave your physical address after the order, Because DHL/UPS/FedEx/TNT don't accept BOX address. Attention: 1. The picture is for reference only. Please make the object as the standard.Before ordering, please make sure the model number and part number 2. Special requirement you can give us a message. 3. Any question, please contact us before leave negative feedback or low stars. We will do our best to your satisfaction.
-
4.1 of 5.0 with 25 Reviews
SALE PRICE: $79.99
Manufacturer: Fluke
Brand: Fluke
Model: 4325492
Manufacturer: Fluke
Brand: Fluke
Model: 4325492
Fluke earth ground testers provide quick, accurate impedance measurements through several test methods: 3- and 4-pole Fall-of-Potential testing, selective testing, stake less testing and 2-pole testing.
-
4.1 of 5.0 with 27 Reviews
SALE PRICE: $80.82 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ1271
Manufacturer: Winters
Brand: Winters
Model: PFQ1271
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
4.1 of 5.0 with 41 Reviews
SALE PRICE: $81.55 1% OFF
Manufacturer: Kavlico
Brand: Kavlico
Manufacturer: Kavlico
Brand: Kavlico
Industrial Pressure Sensors Pressure sensor PCB mount 0 - 1" H2O
-
4.1 of 5.0 with 23 Reviews
SALE PRICE: $81.66 1% OFF
Manufacturer: TEXAS INSTRUMENTS
Brand: Texas Instruments
Manufacturer: TEXAS INSTRUMENTS
Brand: Texas Instruments
TEXAS INSTRUMENTS TLC7705ID VOLTAGE SUPERVISOR, 9 uA, 6V, 8-SOIC
-
4.1 of 5.0 with 44 Reviews
SALE PRICE: $83.32 1% OFF
Manufacturer: Honeywell
Brand: Honeywell
Manufacturer: Honeywell
Brand: Honeywell
Board Mount Pressure Sensors 15 psi, Unamplified Diff Vac Gage,NoPort
-
4.1 of 5.0 with 43 Reviews
SALE PRICE: $84.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-212-100-ST
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-212-100-ST
ACCUVAC TECHNOLOGY Zero Length Reducer CF flange. The manufacturer is ISO 9001-2008 registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.1 of 5.0 with 35 Reviews
SALE PRICE: $85.22 1% OFF
Manufacturer: Honeywell
Brand: Honeywell
Manufacturer: Honeywell
Brand: Honeywell
Board Mount Pressure Sensors DIP 10 in H2O Differential 3.3V
-
4.1 of 5.0 with 4 Reviews
SALE PRICE: $85.85 1% OFF
Manufacturer: MAXIM INTEGRATED PRODUCTS
Brand: MAXIM INTEGRATED PRODUCTS
Manufacturer: MAXIM INTEGRATED PRODUCTS
Brand: MAXIM INTEGRATED PRODUCTS
MAXIM INTEGRATED PRODUCTS MAX809SEUR+T SUPERVISOR CIRCUIT, 5.5V, 3SOT23
-
4.1 of 5.0 with 46 Reviews
SALE PRICE: $86.00 26% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ISO-100-400-N
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ISO-100-400-N
Acuvac Tehcnology ISO Flanges are precision machined from cross forged SS304 Stainless Steel Plate with Surface finish of 32 micro-inches or better. These Flanges can be baked to 200 Deg C and have a Vacuum range of up to 10 to -8 torr. Some of the applications are Vacuum Chambers, manifolds, Valves, Pumps, and a Variety of Experimental Devices.
|
|