Pressure & Vacuum - Page 381

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 8611041

The WIKA commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in a polished brass case for increased durability in corrosive environments. The gauge measures pressure from 15 pounds per square inch (psi) to 6,000 psi, and is accurate to + or - 3/2/3 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade B accuracy class. The male connection is available as either a lower mount or a center back mount and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for compressed gas regulators and for use with beverage dispensing machines.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermo...

Manufacturer: AGPtek Brand: AGPtEK Model: PC5R

Specifications Display: Dual display for Fahrenheit(F) and Celsius(C) Range: -1999 to 9999 (depends on the input signal) Main output: Relay,Normal open, AC 250V/3A DC 30V/3A COS¦Õ =1 PID cooling/heating control( can choose normal alarm output by software) Alarm Output: 1 RELAY: capacity AC 250V/3A DC 30V/3A 7 different Dual Output combinations with: Accuracy: 0.2% Input: Thermo Resistor: PT100, Cu50 Thermocouple: J,S,K,E,Wre3 ~ Wre25 Dimension: DIN: 1/16 (48mmX48mmX80mm) Weight: about 150g Individually programmable PID control parameters. P, I, d, controlling period, digital filter coefficient, and more¡­ (for control theory experts only) SSR control ready to connect external Solid State Relay to handle High current. Applications. Compact design:DIN 1/16, great form-factor to be included/build-in to your product. Apply with step control,1 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc; One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance Input: TC(K, J,S,E)/ RTD (Pt100,CU50)universal input, or 4- 20mA/0-10V signal from standard pressure/level transmitter, (24V/30mA supply available for standard transmitter) Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA output,you can choose PID control or analog output) Alarm output: 2 lines output,7 kinds of alarm mode: high / low / high deviation / low deviation/ interval / out of interval /breakage alarm Package Includes: 1 x TA4-RNR PID Temperature Controller

Manufacturer: Fluke Brand: Fluke Model: 4574703

Easy to hold the camera and use it for extended period of time inspecting hard to reach areas.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5010

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-370

Various mounting options for Dwyer products. Brackets and magnet assemblies are just a couple of examples

Manufacturer: MamBate Brand: AGPtek Model: PC4

This is a bid for a dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-260V AC/DC , Comsumption5VA. DIN 1/16. 3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.) Individually programmable PID control parameters. P, I, d, controlling period, digital filter coefficient, and more¡­ (for control theory experts only) 7 different Dual Output combinations with: 1 relayed output and 1 SSR control voltage output SSR control ready to connect external Solid State Relay to handle High current. Compact design: DIN 1/16, great form-factor to be included/build-in to your product. Apply with step control, 2 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc; One key operation, Auto-tuning PID/ Fuzzy PID control. Easy operation, Reliable performance. Package included: 1 x SSR PID Temperature Controller.AGPtek is a registered trademark protected by the US Trademark Law. AGPtek products are sold by authorized sellers only.

Manufacturer: uxcell Brand: uxcell Model: a16020400ux0114

The pressure switch is specifically designed to stand up to extended duty applications. It can be widely used for pool and spa, anti-skid braking systems, water pump systems, and air compressors etc.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG52J25M4

This Square D Pumptrol 9013FSG52J25M4 electromechanical pressure switch with 60-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1050

180 degrees Pigtail steam syphon is made of welded steel, Schedule 80. Protect the instrument from the damaging effects of high temperature steam. Recommended for use in all steam applications. Pressure rating 3800 psi at 850 degrees F. 1/2" NPT male.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG52J33M4

This Square D Pumptrol 9013FSG52J33M4 electromechanical pressure switch with 50-70 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.