Pressure & Vacuum - Page 131

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 40-500-20000-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616W-2-LCD

Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD (as shown to the left) allows local indication of pressure.

Manufacturer: ROSEMOUNT Brand: Rosemount

NEW ROSEMOUNT 3051CD2A22A1AS2B4C6M5 HART 0-250IN-H2O TRANSMITTER D531169

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 101FTM27B21

Perma-Cal P/N 101FTM27B21 (Dial Trim: Mirror Band, Dampening, Ext. Zero Adj. | Misc. Options: NONE) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: UEi Instruments Brand: UEI Instruments

UEi AK900HC Refrigeration System Analyzer Digital Manifold features new innovative and intuitive pressure bar graphs that show pressure dynamics in real time for easy diagnosis. UEi AK900HC includes 45 pre-programmed refrigerants for a huge range of applications, as well as dual temperature probes for automatic superheat and subcooling readings, LCD screen with bright green backlight for working in low light areas, and a durable hard carrying case. Characteristics: UEi AK900HC Refrigeration System Analyzer Digital Manifold   Modulation of control valves, system behavior and faults indicatedby "dynamic offset" bar graph   Automatic superheat and subcooling readings with dual temperature probes   Durable hard case   Pressure monitoring MIN/MAX   Eliminate need for manual calibration with Auto-Zeroing   Vacuum detected in "Hg   LCD screen with bright green backlight for working in low light areas   Additional refrigerants can be upgraded   Resistant to splashes   Indoor and outdoor use with wide temperature range   Splash Resistant   Resistant to typical oils, acids and sun exposure with protective boot   One year limited warranty Refrigerants Pre-programmed: R-12 R-245fa R-407C R-421A R-428AR-1234yf R-290 R-408A R-421B R-434AR-22 R-401A R-409A R-422A R-437AR-123 R-401B R-410A R-422B R-438AR-124 R-402A R-413A R-422C R-500R-134A R-402B R-414B R-422D R-502R-236ea R-404A R-416A R-424A R-507R-236fa R-406A R-417A R-426A R-508BR-245ca R-407A R-420A R-427A R-600A

Manufacturer: Fluke Corporation Brand: Fluke Model: 2075004

The Fluke 83 Series V Industrial Digital Multimeter is an average responding-RMS indicating digital multimeter (also known as a multitester) for measuring AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200KHz, resistance to 50 megaohms, and capacitance to 9,999 microfarads and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display is backlit for readability in low-light conditions and includes an analog bar graph which updates 40 times per second which is useful for making peak and null adjustments and for observing rapidly changing inputs. The meter has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility and a hold function to capture readings. This meter is safety rated for Category III up to 1,000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 18.6 x 8.6 x 3.1 cm (H x W x D) and weighs 22 oz./624 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a removable holster with built-in test lead and probe storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electri...

Manufacturer: ROSEMOUNT Brand: Rosemount

ROSEMOUNT 1151DP4J22PRESSURE TRANSMITTER

Manufacturer: CME Tools Brand: CME

14-20" QUICK CHANGE TOOL POST-6PCS/SET-WEDGE TYPE DESCRIPTION: Tool Post and Tool Holders No. 1, No. 2, No. 4, No. 7, No. 10 No. 1 Turning & Tool Holder 1/2-1" No. 2 Boring, Turning & Facing Tool Holder 1/2-1" No. 4 Boring Bar Tool Holder 1 & 3/4" No. 7 Universal Parting Blade Tool Holder 1" No. 10 Knurling, Facing & Turning Tool Holder 1/2-1" Wedge type tool posts are precision engineered to assure repetitive accuracy Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting All working parts hardened and precision ground Maximum rigidity for chatter free performance No time wasted with shims Speed lathe operations 90% Completely sealed for maintenance free operations Takes only a few seconds to change tools

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: PN4223

Electronic Pressure Monitor, Measuring Range: 0...25 Bar / 0...363 Psi / 0...2,5 Mpa, Process Connection: 1/4'' Npt, 5-Wire, Ac / Triac, Operating Voltage: 85...265 V Ac, Nominal Voltage: 90...250 V Ac (45...65 Hz), Current Consumption: 10 Ma, Normally Open / Closed Programmable, Quick Disconnect, 1/2'' Unf-Connector, Function Programmable, Housing Material: Stainless Steel (304S15) Pc (Makrolon) Pbt (Pocan) Pa Fpm (Viton), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ISO-320-1257-OF

Acuvac Tehcnology ISO Flanges are precision machined from cross forged SS304 Stainless Steel Plate with Surface finish of 32 micro-inches or better. These Flanges can be baked to 200 Deg C and have a Vacuum range of up to 10 to -8 torr. Some of the applications are Vacuum Chambers, manifolds, Valves, Pumps, and a Variety of Experimental Devices.