Pressure & Vacuum - Page 136

Manufacturer: ZIJIA Brand: ZIJIA

Specifications: Product: Pressure Sensor Working voltage: 5V Output voltage: 0.5-4.5V Working pressure range: 0-2.5 MPa Accuracy ± 1.0% FS Thread size: G1/2" Sensor material: Metal/ Plastic Size: Approx. 5x2.4cm/ 1.97"x0.94" (L x Dia.) Wire length: 18cm/ 7.1" approx Description: Wide range temperature compensation Media for non-corrosive gas, water, oil Suitable for civilian products supporting the use of bulk Suitable for all kinds of hydraulic, pneumatic pressure measurement such as wall hanging furnace, gas furnace, gas storage, etc Package Includes: 1 x G1/2" Pressure Sensor

Manufacturer: Fluke Corporation Brand: Fluke Model: TP175E

Includes removable 4 mm lantern tips that thread onto the lead tip. Adjustable tip length, allowing increased safety and precision. Compatible with the TL22x series, TL238 and TL27 test leads. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. UL Listing. Probes always show correct category rating for tip being used. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6562'). 1 Year warranty.

Manufacturer: G.W. SCHLEIDT Brand: G.W. Schleidt

These Galileo solid glass thermometers contain hand-blown multi-colored glass spheres featuring GOLD PLATED MEDALLIONS. This functional and attractive desk accessory is based on the physicist Galileo Galilei's (1564-1642) discovery that the density of fluid expands and contracts depending on temperature. The lowest floating sphere in the upper group indicates the current temperature. As the temperature decreases, spheres will rise and as the temperature increases, spheres will fall. Please note that the Galileo thermometer is a scientific instrument and not a toy.

Manufacturer: uxcell Brand: uxcell

The Reversing Drum switch is mainly used to start forward or backward and stop directly three-phase asynchronous electric motor.3 Positions: Forward, Stop, Reverse.Switch by the handle, the cam, the contact form.3 groups contacts.Work for start, operate, stop and reverse, mainly use for direct make-and-break squirrel-cage induction motor, use in the circuit of AC 60Hz, rated operating voltage to 380V and rated operating current to 60A.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL175 Color: Black/Red

Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.

Manufacturer: Measurement Specialties Brand: Measurement Specialties

Board Mount Pressure Sensors MS5803-05BA 6BAR WHITE GEL

Manufacturer: Winters Brand: Winters Model: PFQ809R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1125-C

Sintered pressure snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes. This eliminates instrument failure due to pressure shock. Snubbing action is achieved by utilizing a corrosion resistant 316 stainless steel sintered disc. Provides long service life with no moving parts to wear out. Grade C disc is used in water and light oil applications. Made of brass. 1/4" NPT male. 0.812" Hex. 0.56" Thread length. 1.60" Height.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-338

The Dwyer A-338 brass servel adapter connects rubber or plastic tubing to gas appliances. Brass construction is durable for use with gas. The adapter has 3/8" and 5/16" National Fine (NF) threads for gas appliances and barbs for 1/8" and 3/16" inner diameter plastic or rubber tubing. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.

Manufacturer: Schneider Electric Brand: PUMPTROL

(1) FSG2 40/60 pressure switch. PRE SET ON 40PSI, OFF 60 PSI. SQUARE D Brand. Rated for up to a 2HP 230 Volt motor. GOOD HIGH QUALITY SWITCH!