Pressure & Vacuum - Page 451

Manufacturer: Winters Brand: Winters Model: PFQ702

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Winters Brand: Winters Model: PFQ712R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: MAXIM INTEGRATED PRODUCTS Brand: MAXIM INTEGRATED PRODUCTS

MAXIM INTEGRATED PRODUCTS MAX811TEUS+T SUPERVISOR, RESET, 3.08VTH, 4SOT143

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 49520 Color: Blue

With 1% accuracy (class 1) calibration. Gauges are completely filled with glycerin for maximum protection from pulsation. Large 3-1/2″ (90 mm) diameter gauge with refrigerants color-coded on the dials in bold numbers.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9694298

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in a stainless steel case that resists corrosion against most samples. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi. It is accurate to + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center back mount, and comes with a choice of a 1/8", 1/4", or 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for gaseous or liquid samples, including those found in hydraulics and compressors in the process industry.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a globa...

Manufacturer: ZhuHai JiDa HuaPu Instrument Co.,Ltd Brand: HoldPeak

Perfect Choice for Professional Electricians and HVAC Technicians The HOLDPEAK HP-570M Digital Clamp Meter is the perfect choice for both HVAC and electrical applications due to its versatile set of features. Electricians will find it's thin, light and versatile with thinner jaws than standard clamp meters (only 0.4"/10mm thick). Its ability to measure temperature, capacitance are important features for HVAC technicians. The HP-570M meter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 25 mm. Product Features Dual Displays - Permits simultaneous reading of amperage & voltage AC Current to 1000A DC Current to 1000A DC voltage to 1000V AC voltage to 750V Resistance to 40MΩ Continuity buzzer Diode test Hold and maximum reading functions Auto ranging C/F exchange Auto power off and low battery indication Accommodates conductors up to 25 mm (1.0") in diameter Rubber over-molded case What's in the Box? -- HP-570M Dual Display Digital Clamp Multimeter -- Test Leads -- Bar Graph Display -- Type-K Probe -- (1) 9V 6F22 Batteries (Installed) -- Soft Vinyl Carrying Case -- User's Manual

Manufacturer: Johnson Controls Brand: Johnson Controls Model: P32AC-2C

Johnson Controls SPDT DIFFERENTIAL AIR PRESSURE SWITCH .05/5 WC ADJUSTABLE W/SCALE U MTG BRKT 7030030-900-5

Manufacturer: Trerice Brand: Trerice Model: 760B

The Trerice 760B Low Pressure The Trerice 760B Low Pressure Gauge is designed to accurately measure extreme low pressure conditions. This pressure gauge employs a diaphragm capsule sensing element to measure the low pressure. Case material is drawn steel with brass wetted parts.

Manufacturer: E-Z Pack Brand: WEP

WEP/ E-Z Pack- Throttle Control Switch for Automated Side Loader, Garbage Truck.

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Board Mount Pressure Sensors 30 PSIG GAUGE