Pressure & Vacuum - Page 121

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 49199

Solid brass case and premium movements. Heavy duty phosphor bronze and stainless steel internal components for longer service life under severe use. Flutter less technology with brass surge protector to minimize needle pulsation.

Manufacturer: Johnson Controls, Inc. Brand: Johnson Controls

P74FA1C, Johnson Controls, Inc., Differential Pressure Control 8/70# WAT.SYS.AR EX AMMO

Manufacturer: CME Brand: CME Tools

6" - 3 JAWS Self-Centering T.I.R.---0.003" w. L00 adapter backing plate PRECISION SEMI-STEEL BODIES. TOP QUALITY. AMERICAN STANDARD. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. 1-5/8" THRU HOLE DIAMETER Back mounting screws distribution parameter dia: 142mm Back mounting recess dia: 130mm 3600 rpm

Manufacturer: CME Brand: CME

6" - 3 JAWS Self-Centering precision adjustable structure chuck , 6"/167mm Industrial part# : K31-167A Short cylindrical center mounting. Centering accuracy can be improved by adjusting the holding structure to meet very precision machining. TOP QUALITY. AMERICAN STANDARD. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. Back mounting recess dia: 80mm 44mm thru hole diameter 147mm bolt circle diameter

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The SERIES EWDP Wireless Communication Adjustable Differential Pressure Switch uses EnOcean® wireless technology to monitor pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches of water column and pascals allows changes to the pressure set point to be made without a pressure gage. The battery-powered switch is equipped with radio module for frequencies of 902 MHz or 868 MHz which sends a signal wirelessly to a Series USB-300 receiver at each change of status. The silicone diaphragm makes this series ideal for use with air and other non-combustible gases. The EWDP is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The compact size, adjustment knob, and wireless capabilities make the EWDP the perfect choice for HVAC applications in temporary installations or retrofits of existing buildings. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The SERIES EWDP Wireless Communication Adjustable Differential Pressure Switch uses EnOcean® wireless technology to monitor pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches of water column and pascals allows changes to the pressure set point to be made without a pressure gage. The battery-powered switch is equipped with radio module for frequencies of 902 MHz or 868 MHz which sends a signal wirelessly to a Series USB-300 receiver at each change of status. The silicone diaphragm makes this series ideal for use with air and other non-combustible gases. The EWDP is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The compact size, adjustment knob, and wireless capabilities make the EWDP the perfect choice for HVAC applications in temporary installations or retrofits of existing buildings. (Picture shows standard model).

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 121TID14Y23

Perma-Cal P/N 121TID14Y23 (Dial Trim: Dampening | Misc. Options: NONE) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/DP2-12-5 | ACI | Differential Pressure Sensor Transducer Bidirectional | +/- 0.1" w.c. | 0-5 VDC |

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6001-2LCD

A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.