Pressure & Vacuum - Page 11

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 202L-204D

An inexpensive utility gauge for the broad commercial and industrial markets. Suitable for air, water, oil, gas or any other media not corrosive to brass.

Manufacturer: Winters Brand: Winters Model: PFQ804LF

Applications: Ideal for plumbing, heating, air conditioning, pumps, compressors and pneumatic equipment. Pulsation resistant, liquid filled stainless steel case. CRN registered. Warranty: 5 years. Dial: White aluminum with black and red markings. Lens: Polycarbonate. Fill Fluid: Glycerin. Case: 304 SS. Socket: Lead Free Brass. Bourdon Tube: Lead free phosphor bronze C or coil shaped. Movement: Brass. Socket Gasket: Buna N for two-piece internal socket seal. Working Pressure: Maximum 75% of full scale value. Over Pressure Limit: 25%. Ambient Temperature: -4°F to 150°F (-20°C to 65°C). Dial Size: 2.5” (63mm). Connection: 1/4” NPT Bottom connect with restricted orifice. Accuracy: 1.5% of Full Scale Value. Range: 0-100 PSI/KPA

Manufacturer: Winters Brand: Winters Model: PFQ806LF

Applications: Ideal for plumbing, heating, air conditioning, pumps, compressors and pneumatic equipment. Pulsation resistant, liquid filled stainless steel case. CRN registered. Warranty: 5 years. Dial: White aluminum with black and red markings. Lens: Polycarbonate. Fill Fluid: Glycerin. Case: 304 SS. Socket: Lead Free Brass. Bourdon Tube: Lead free phosphor bronze C or coil shaped. Movement: Brass. Socket Gasket: Buna N for two-piece internal socket seal. Working Pressure: Maximum 75% of full scale value. Over Pressure Limit: 25%. Ambient Temperature: -4°F to 150°F (-20°C to 65°C). Dial Size: 2.5” (63mm). Connection: 1/4” NPT Bottom connect with restricted orifice. Accuracy: 1.5% of Full Scale Value. Range: 0-200 PSI/KPA

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG19J52X

This Square D Pumptrol 9013FHG19J52X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 125 psi. The switch has a 1/4" NPT external fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp or less. The non-adjustable differential is 30 psi, and the adjustable cut-out range is 70-150 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Oria Brand: Oria

The reason for you to choose Oria tire gauge: *Flexible and Enhanced Air Hose and Inner Brass Joints - To Avoid Air Leakage. *0-60 PSI/0-4BAR Mesurement range - Perfect for Auto, Motorcycle and Bicycle. *Rugged Protective Cover. *Pressure Release Button. *ANSI B40.1 Grade B Accuracy. *Heavy Duty Steel Construction. *Integrated Bleed Button - For Accurate Tire Pressure Adjustments. *2" Dial and 360 Degree Swivel Chuck - Easy to read from any angle. Using Oria® tire pressure gauge, you may get the benefits from Making tires at a correct pressure value: *Driving safety increased. *Improved on fuel economy. *Save money on tires. *Handling performance improved.

Manufacturer: General Electric Brand: GE Model: WH12X10076

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WH12X10076 Pressure Switch.

Manufacturer: PASCO Brand: Pasco

Specially constructed for use on hot water boilers, these combination gauges give accurate indication of temperature and pressure. Gauges are designed to withstand the conditions normally encountered on domestic heating systems.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 4277873

The WIKA commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is 4 1/2" in diameter and enclosed in a stainless steel case that resist corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 600 psi, and is accurate to + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class. The male connection is mounted on the lower back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for use in HVAC and plumbing applications.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for quality assur...

Manufacturer: Winters Brand: Winters Model: PLP301

The Winters PLP series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case, and a male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement for the 2.5" gauge is an engineering plastic upper and lower plate with brass pinion and sector. The movement for the 4" gauge is brass. The welding is brazed solder. The over-pressure limit is 30% of full scale value. The gauge operates in fluctuating pressure up to 60% of full scale value and status pressure up to 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. F...

Manufacturer: Gems Sensors, Inc. Brand: Gems Model: 209693

These Miniature pressure switches are designed for demanding applications where space and/or price are strong concerns. The switches utilize a piston/diaphragm design, which incorporates the high proof pressure of piston technology with the sensitivity of diaphragm designs. Switches are field adjustable via an Allen head screw that is hidden to protect against unauthorized tampering.