Pressure & Vacuum - Page 125

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840065

Covers a wide pressure range, 0 ~ 725 psi, not usually found in a single manometer. Compatible with both liquids and gases. Useful in measuring pneumatic pressure, automobile engine vacuum pressure, super heat measurements, hydraulic servo controls, refrigeration, air conditioning, and food processing. Features eight units of measure, min/max, hold, auto power off and an RS232 computer interface. Comes in a hard carrying case with a 9V battery. (Shown with transducer, transducers sold separately).

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 313D-404CF

The PIC Gauge 313D-404CF pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry, fillable, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge features an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a ring clamp and a 1/4" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: Fluke Corporation Brand: Fluke Color: T+PRO-1AC KIT

The T+Pro-1AC Electrical Tester and AC Voltage Detector Kit includes the Fluke T+Pro electrical tester for measuring AC and DC voltage to 600V and the Fluke 1AC-II voltage detector to test for energized circuits. The T+Pro electrical tester measures AC and DC voltage to 600V and resistance to 9.99 kilohms, and it indicates voltage via an LED light bar, sound, and vibration. An audible and visible continuity sensor confirms that a circuit conducts electricity. Its LCD screen displays test results, and backlighting helps eliminate light reflections and improves contrast in low-light conditions. A data hold function keeps a reading on the display for recording. It has a built-in flashlight for use in low light, and a GFCI (ground fault circuit interrupter) trip to verify functionality of GFCI circuits or components. It can detect the direction of a rotary field in a three-phase system when measured phase to phase. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the batteries need to be replaced. It meets International Electrotechnical Commission (IEC) safety standards 61010-1, and is rated for CAT IV installations to 600V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 1,000V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. It comes with a test lead wrap, a pair of test probes, and instructions.The T+Pro comes with the Fluke 1AC-II voltage detector for detecting AC voltage from 90V to 1,000V. This voltage detector has visible and audible voltage indicators, and it performs a self-test to visually indicate that it is working. The unit automatically turns off after five minutes of nonuse to conserve battery life, and it signals when the meter's batteries need to be replaced. The unit operates on two AAA batteries....

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 40-510-30/160-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312L-402A

The PIC Gauge 312L-402A pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a glycerine filled, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The glycerine filled dial dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. Glycerine filled dials are designed for use in environments exposed to mild changes in temperature. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge has an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/2" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312L-404CF

The PIC Gauge 312L-404CF pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a glycerine-filled, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The glycerine-filled dial dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. Glycerine-filled dials are designed for use in environments exposed to mild changes in temperature. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. The gauge has a 30/0/160 Vac psi pressure range with 20 psi figure intervals and 2 psi graduation intervals, and is accurate to + or - 0.5 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/4" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments. SpecificationsWetted parts materialStainless steel 316Case materialStainless steel, welded case-to-stem connectionUnits of measurepsiPressure range30/0/160 Vac psiAccuracy+ or - 0.5% of span, ASME B40.1 Grade 2ADial size4"Dial lens materialLaminated safety glassDial fill materialGlycerineConnection1/4" NPTMountLower backOperating temperature range30 to 160 degrees F (glycerin filled)PointerAdjustable, black aluminumBezelRemovable, stainless steelPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to a reference measurement. Gauge pressure measu...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-024

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: Supco Brand: Supco Model: DPG1000

The DPG Series are digital pressure gauges featuring multiple units, selectable zero reference and automatic power off to conserve battery power. The DPG100/DPG1000 can be used with any media compatible with 17-4PH stainless steel. 1/8 NPT Female Connection. Long Battery Life. 1 Hour Auto Off. Applications: HVAC Refrigerant lines, steam pipes, process piping, compressed air lines, specialty gas piping. Stability (1 year): +/-0.25 percent FS (type). Overange protection: 2X rated pressure. Burst pressure: 5X or 20,000 psi whichever is less. Pressure cycles: >100 million. Operating temperature range: 32 degree F to 130 degree F (0 degree C to 55 degree C). Storage temperature range: -40 degree F to 150 degree F (-40 degree C to 65 degree C). Compensated temperature range: 32 degree F to 130 degree F (0 degree C to 55 degree C). Temperature compensation zero:

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 615-500-1-1-2-8

NOSHOK series 615 pressure transducers are designed for heavy duty applications requiring high accuracy and durability. Utilizing similar diffused semiconductor or sputtered thin film technology found in the 100 series, these transducers are stable, accurate, shock resistant, and extremely durable. The durability is coupled with the mechanical integrity of the case, process connection, and wetted parts constructed of corrosion resistant stainless steel, completing the NOSHOK product characteristics you have come to expect. Ideal for hydraulic and pneumatic systems, industrial machinery and machine tools, injection molding machines, stamping and forming presses, pumps and compressors, laboratory and test equipment, railroad equipment, HVAC systems, medical, refrigeration equipment, marine, power generation, construction, petrochemical and water management applications. Output signals: 4 mA to 20 mA, 2-wire. Repeatability: less-than equal to +/-0.05 percent full scale. Hysteresis: less-than equal to +/-0.1 percent full scale. Stability: less-than equal to +/-0.2 percent full scale for 1 year, non accumulating. Power supply: 10 Vdc to 30 Vdc for current output, unregulated and 14 Vdc to 30 Vdc for voltage output, unregulated. Load limitations: less-than equal to (VPower-10)/0.020 Amp for 4 mA to 20 mA. Housing material: 316 stainless steel. Temperature ranges: compensated 32 to 175 degree F, effect +/-0.01 percent/degree F for zero and span, storage - 40 to 212 degree F, medium - 20 to 212 degree F, ambient - 15 to 175 degree F. Response time: less than 1 ms (between 10 percent and 90 percent full scale). Durability: greater-than 100,000,000 full scale cycles. Adjustment: +/-10 percent full scale for zero and span. Environmental protection: NEMA 4X, IP65 (IEC 529). Electromagnetic rating: CE compliant to EMC norm EN61326: 1997/A1: 1998 RFI, EMI and ESD protection. Electrical protection: reverse polarity, overvoltage and short circuit protection.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada