Pressure & Vacuum - Page 455

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series 616KD Differential Pressure Transmitters with One-Touch® technology are designed for simplicity making them the ideal choice for installers and maintenance professionals. The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration.

Manufacturer: MICROCHIP Brand: MICROCHIP

MICROCHIP MCP111T-315E/TT IC, V DETECTOR, 3.08V, LOW, SOT23B

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors DIP,Sing Ax Barbless Gage 3.3V

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2080

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9310754

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is three inches in diameter and enclosed in a forged brass case for increased durability in corrosive environments. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to + or - 2/1/2 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade A accuracy class. The male connection is mounted on the lower back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use with paper machines and hydraulic presses.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organizati...

Manufacturer: COLE-PARMER Brand: Dwyer

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure. The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages. What's Included: Two 1/8" NPT plugs, two 1/8" rubber tubing adapters, and three mounting adapters with screws The industry standard in indicating low air or gas pressures of positive, negative, or differential pressures Large, easy-to-read 4" (102 mm) dial No manometer fluid to evaporate, freeze, or cause toxic or leveling problems

Manufacturer: CME Tools Brand: CME Tools

CAT40 RETENTION KNOB PS-532x45 for HASS--new--10 PCS Tool Holder Set

Manufacturer: CME Brand: CME Tools

2" x 4" x 6" precision block pair- NEW MADE OF HARDENED STEEL, TOP QUALITY HARDNESS: HRC56 TO 60 SQUARE AND PARALLEL TO ACCURACY: 0.0002" HARDENED AND PRECISION GROUND

Manufacturer: CME Brand: CME Tools

50MMx100MMx150MM precision block pair- NEW MADE OF HARDENED STEEL, TOP QUALITY HARDNESS: HRC56 TO 60 SQUARE AND PARALLEL TO ACCURACY: 0.002MM HARDENED AND PRECISION GROUND

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-210-30-inH2O

The NoShok 200 series 2.5" (63 mm) pressure gauge has brass wetted parts, a dry circular dial enclosed in a steel case, a lower mount or center back male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black painted steel case provides corrosion resistance. The lens on the dry 2.5" dial is clear acrylic. The dial is white aluminum with black markings, is UV resistant, and has a black finished aluminum pointer. The gauge measures pressure with either a single or a dual scale in inch water column (WC), psi, or oz./square inch. The gauge is accurate to + or - 1.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade A accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement is brass and nickel-silver with highly polished bearing surfaces. The gauge has an ultra-sensitive copper alloy diaphragm capsule. The gauge operates in both fluctuating and static pressures up to 90% of the dial range. The ambient temperature for the gauge is 0 to 140 degrees F (-18 to 60 degrees C). The media temperature range is -4 to 140 degrees F (-20 to 60 degrees C). This pressure gauge is suitable for medical, biomedical, HVAC, gas distribution, filtration, burner and gas combustion service, and wastewater treatment applications.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressu...