Water Quality & Instrumentation - Page 772

Manufacturer: StandardPlumbing: Kohler Brand: UEI Test Equipment Model: DL389KIT

True-RMS - 4000F Capacitance - 2000A AC/DC - Non-Contact Voltage 24~600V AC - 750 Volts AC - 1000 Volts DC - 400A AC - MIN/MAX - -22Degree ~ 752DegreeF Temperature (K type) - 40MΩ Resistance/Continuity - Frequency/Duty Cycle - Diode - Data Hold - Dual Display - Detachable Clamp Head - Input Jack Lock

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98130

The Hanna Instruments HI 98130 waterproof floating tester displays pH, high-range conductivity (EC) and total dissolved solids (TDS) with Automatic Temperature Compensation (ATC) on a dual-level LCD display for hydroponics, agricultural, and water quality testing applications. The meter provides automatic 2-point pH calibration and automatic 1-point calibration for EC and TDS. The HI 73127 pH electrode is replaceable, and has a stainless steel snap-in connector that prevents bent or broken pins. The pH electrode cloth junction is renewable and can be pulled out further when the electrode is soiled to extend the life of the electrode. The conductivity electrode is made from graphite, which eliminates contamination from salt deposits in the solution being tested. The exposed temperature sensor provides quick response and accurate, ATC readings.The tester has a number of power management features, including the percentage of remaining battery power displayed at startup, automatic shut-off after eight minutes of inactivity, and a battery error prevention system that alerts the user when battery is low to avoid issues with parameter readings. The tester comes with a pH electrode, electrode removal tool, and four 1.5V batteries.SpecificationspH range0.00 to 14.00 pHpH accuracy+ or – 0.05 pHConductivity range0 to 20.00mS/cmConductivity accuracy+ or – 2% (full scale)TDS range0.00 to 10.00pptTDS accuracy+ or – 2% (full scale)Temperature range0 to 60 degrees C/32 to 140 degrees FTemperature accuracy+ or – 0.5 degree C/1 degree FTemperature compensationpH: automatic; EC/TDS: automatic with ß adjustable from 0.0 to 2.4%/CpH electrode (included)HI 73127Battery type, life(4) 1.5V AAA, approximately 100 hours of continuous useWeight100g/3.5oz.Dimensions163 x 40 x 26mm/6.4 x 1.6 x 1.0 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.A multiparameter meter ...

Manufacturer: Thomas Scientific Brand: Thomas Model: 2102

Aluminum stand features rotating "lazy susan" style disc, with hooks that support five dip viscosity cups. Made of polished stainless steel. Looped handle and finger ring. Calibrated with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002. Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes using efflux time measured, and with a table giving viscosity value calculated to the nearest 1/10 centistoke for each 1/10 second increment of efflux time. Overall length: 355 mm. Base: 5"diameter. Support shaft: 15". Overall height: 17". 39 to 238 poise centistokes range.

Manufacturer: Azzota Brand: Azzota Model: PHMV-5

Benchtop pH/mV Meter Economic, (ELECTRODE included), pH Range: 0.00-14.00pH, mV Range: 0 to +/-1999mV.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI991002

The Hanna Instruments HI 991002 portable waterproof meter with a probe in a stainless steel and titanium enclosure measures extended range pH and ORP (oxidation reduction potential) on a large LCD screen that displays the primary reading, temperature, and calibration guides for plating baths, waste water, swimming pool and spa water quality, and environmental applications. The instrument is waterproof and has a compact casing. The Hold button freezes the reading on the display for manual recording. pH can be automatically calibrated at one or two points with two memorized buffer sets (standard 4.01, 7.01, 10.01, or NIST 4.01, 6.86, 9.18). Temperature scale can be displayed in C or F. The on-screen tutorial messages explain how to select calibration buffers and temperature scale options.Power management features include the percentage of remaining battery power displayed at startup, automatic shut-off after eight minutes of inactivity, and a battery error prevention system that alerts the user when battery is low to avoid issues with parameter readings. The HI 1297D pre-amplified pH and ORP probe with internal temperature sensor has an easy-to-clean recessed tip that prevents solution solids from collecting on the sensor. The stainless steel and titanium body of the probe functions as a potential matching pin for increased stability of readings and extended sensor life. The probe has a DIN (Deutsches Institut für Normung) connector and 1-meter/3.3-foot cable that attaches at the bottom of the meter to stay out of the way.The meter includes a carrying case, pH buffer sachets, calibration solution, and electrode cleaning solution.SpecificationspH range-2.00 to 16.00 pHpH accuracy+ or – 0.02 pHORP range+ or – 1,999mVORP accuracy+ or – 2% (full scale)TDS range0 to 10.00ppt (g/L)TDS accuracy+ or – 2mVTemperature range-5.0 to 105 degrees C/23 to 221 degrees FTemperature accuracy+ or – 0.5 degrees C up to 60 degrees C, + or - 1.0 degree C outside; + or - 1.0 degree F up to 140 degree...

Manufacturer: iPower Distributor L&G Brand: Bluelab Model: 716484

The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. Just one Bluelab Connect Stick is required to receive wireless data from one or more Guardian Monitor connects.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI9126

The Hanna Instruments HI 9126 is a portable meter for measuring the pH, temperature and oxidation reduction potential (ORP) of a substance. The meter features a large, dual-level LCD screen, with a graphical interface that provides instructions for calibration. Temperature compensation and pH calibration are automatic, with five memorized buffer values (pH 4.01, 6.86, 7.01, 9.18 and 10.01). The meter comes with the HI 1230B combination double-junction, gel-filled pH electrode, and the HI 7662 stainless steel temperature probe with 1 m (3.3') cable. The meter can also be used with ORP electrodes (sold separately). The HI 9126 has a range of -2.00 to 16.00 pH (+ or - 0.01) and a resolution of 0.01 pH. Temperature range is -20.0 to 120.0 degrees C/-4.0 degrees F to 248.0 degrees F (+ or - 0.4 degrees C / + or - 0.8 degrees F) with a resolution of 0.1 degrees C / 0.1 degrees F. ORP range is + or - 699.9 mV; + or - 1999 mV with accuracy ±0.2 mV; + or - 1 mV and resolution 0.1 mV; 1 mV. Input impedance is 1012 Ohm, and the meter operates using three 1.5V AAA batteries which provide approximately 200 hours of continuous use (sold separately). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists. Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built-in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To ensure the quality of their products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing. What's in the Box? pH and temperatures probes pH 4.01 and 7.01 buffer solutions (20 mL sachets) 100 mL plastic beak...

Manufacturer: Hanna Instruments Brand: Hanna Instruments

HI 9146 is a water-resistant, dissolved oxygen meter that measures up to 300 percent saturation or 45 ppm ( milligrams per liter) with temperature compensation and automatic calibration. It has been developed for DO and temperature measurement in water, wastewater, wine and applications such as fish farming. This instrument also allows altitude compensation up to 4000 m and the ppm and percent saturation are both compensated for changes in solubility of oxygen in water and for permeability of the membrane as well as the temperature effect. The included polarographic probe features built-in temperature compensation and removable protective membrane cover. Range- O2: 0.00 to 45.00 milligrams per liter (ppm), percent saturation O2: 0.0 to 300.0 percent, temperature: 0.0 to 50.0 degree C. Resolution- O2: 0.01 milligrams per liter (ppm), percent saturation O2: 0.1 percent, temperature: 0.1 degree C. Accuracy at 20 degree C/68 degree F- O2: +/-1.5 percent F.S., percent saturation O2: +/-1.5 percent F.S., temperature: +/-0.2 degree C (excluding probe error). Dissolved oxygen calibration- one or two points at 0 percent (HI 7040 solution) and 100 percent (in air). Temperature compensation- automatic, 0 to 50 degree C (32 to 122 degree F). Altitude compensation- 0 to 4000 m (resolution 100 m). Salinity compensation- 0 to 80 g/L (ppt) (resolution 1 g/L). Probe- HI 76407/4F polarographic DO probe, internal temperature sensor, DIN connector and 10m cable (included). Battery Type/Life- 1.5V AAA (3)/approximately 200 hours of continuous use without backlight (50 hours with backlight on). Environment-0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Weight-300 g (10.6 oz). Measures 7-19/64" length by 2-51/64" width by 1-25/64" height.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35635-00

The Oakton 35635-00 turbidity meter T-100 kit has a waterproof and dustproof, handheld meter that floats, if dropped in liquids, and comes with calibration vials, cuvettes with light shield caps, silicone oil, lint-free cloth, and hard carrying case. It measures substance turbidity and is commonly used for water quality testing, treatment and management, and river monitoring in environmental, and process monitoring. This meter features four-point, push-button calibration for accuracy and auto-ranging from 0 to 1000 Nephelometric Turbidity Units (NTU) for ease of use. It has a sealed optical system with an infrared light source to deliver accuracy across a wide range, and a large LCD display to show readings and units of measurement. It has hold and auto-off functions, and diagnostic error messages, as well as a power-saving function to take up to 1,200 readings using one set of batteries. The meter is Ingress Protection (IP) 67-rated, for protection against solid objects or liquids. It has EPA-recognized ASTM D6855-03 compliance, and meets ISO 7027 (DIN EN 27027) method. The 35635-00 has temperature range of 0 to 50 degrees C (32 to 122 degrees F). Its turbidity range is 0 to 19.99; 20.0 to 99.9; 100 to 1000 NTU, resolution 0.01, 0.1, 1.0, accuracy + or - 2% of reading from 0 to 500 NTU, + or - 3% of reading 500 to 1000 NTU. It has four primary standards 0.02, 20.0, 100 and 800 NTU. Its dimensions are 6.50(l) x 2.75(w) x 2.00(h) inches, and it weighs approximately 1.5 lbs. Use with four AAA batteries (not included) for approximately 100 hours of continuous use. Turbidity meters use light reflection to detect the presence of matter in a liquid substance. They are commonly used for water testing, and to test for bacteria and other growth in the food and beverage industries and in environmental applications. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98107

The HI 98107 pHep pH Tester is a portable pH meter with a replaceable electrode and a non-clogging, replenishable fiber junction. Featuring a large easy-to-read LCD screen, the tester provides fast and accurate pH readings in a rugged and ergonomically designed casing. The HI 98107 has a replaceable electrode and renewable reference junction, which helps prolong the life of this tester. With the replenishable junction, simply pull 1 to 2mm (1/8'') of the junction out with tweezers to recondition the pH electrode. This procedure can be repeated up to 15 times, before the whole fiber is removed. The HI 98107 tester functions in temperatures of 0 to 50 degrees C (32 to 122 degrees F), and has a range of pH 0.0 to 14.0 (+ or - 0.1 pH) with a resolution of 0.1 pH. It is calibrated manually to 2 points. The HI98107 is an updated version of the HI96107 (pHep) pH meter. The dimensions are 175 x 41 x 23 mm (6.9 x 1.6 x 0.9") and the weight is 95g (3.4 oz.). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists. Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents, and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built-in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To ensure the quality of its products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing. What’s in the Box? Protective cap Calibration screwdriver Four 1.5V batteries Instructions