|
|
-
4.4 of 5.0 with 9 Reviews
SALE PRICE: $130.37 1% OFF
Manufacturer: Gasco
Brand: Gasco
Manufacturer: Gasco
Brand: Gasco
Calibration Gas, Gas Name Hydrogen Sulfide, Nitrogen, Gas Mixture 200 ppm Hydrogen Sulfide, N2, Background Gas Nitrogen, Cylinder Cylinder 44L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 825 psi, Cylinder Dia. 2-9/10 In.
-
4.4 of 5.0 with 33 Reviews
SALE PRICE: $130.78 1% OFF
Manufacturer: LK Industries
Brand: L-K Industries
Model: S10-5000NC
Manufacturer: LK Industries
Brand: L-K Industries
Model: S10-5000NC
Thermometer -30 - 120F certified
-
4.4 of 5.0 with 3 Reviews
SALE PRICE: $132.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-220
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-220
-
4.4 of 5.0 with 3 Reviews
SALE PRICE: $132.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-220
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-220
-
4.4 of 5.0 with 23 Reviews
SALE PRICE: $133.15 3% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619003
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619003
Optional accessory for rectangular gage block.
-
4.4 of 5.0 with 11 Reviews
SALE PRICE: $133.78 14% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850270
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850270
|
The Ohaus metric, stainless steel electronic balance calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight has straight sides and a flat top that allows weights to be stacked. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the ...
-
4.4 of 5.0 with 5 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611160-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611160-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
4.4 of 5.0 with 31 Reviews
SALE PRICE: $135.00 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS40-III
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS40-III
10:1 Voltage probe with safety-designed shrouded 4mm test pin, for use with 120 Series ScopeMeter. Hook clip (Red) and ground lead included. The shrouded 4mm banana test pin makes this probe also compatible with standard safety-designed alligator clips. Set contains 600V CAT III / 1000V CAT II rated items: 10:1 voltage probe (1 black), hook clip (1 red) (HC120-III), ground lead with mini alligator (1 black). Attenuation 10x. Bandwidth DC to 40 MHz (-3 dB). Maximum input voltage 600V CAT III / 1000V CAT II as per IEC61010-031:2008. Input resistance/capacitance, 5 mega ohm / 15.5 pF. Compensation fixed for ScopeMeter 120 series (14 pF). Safety-shrouded 4 mm banana pin with test probe tip. Instrument connector 4mm shielded banana plug. Cable length 1.2m. Safety IEC / EN 61010-031:2008; UL61010 B-2-031; CSA C22.2 No. 1010.2.031. Pollution Degree 2. Protection Class II (double insulation). Black color. UL Listed.
-
4.4 of 5.0 with 9 Reviews
SALE PRICE: $135.79 1% OFF
Manufacturer: VERMONT GAGE
Brand: Vermont Gage
Manufacturer: VERMONT GAGE
Brand: Vermont Gage
Marked with size and direction of tolerance on gages over .060". Within .0001" round. Material: 52100 tool steel Hardness: Rc 60 - 62 Length: 2" Finish: 10µ" or better Certificate of Accuracy included.
-
4.4 of 5.0 with 21 Reviews
SALE PRICE: $139.34
Manufacturer: Rice Lake Weighing Systems
Brand: Rice Lake Weighing Systems
Manufacturer: Rice Lake Weighing Systems
Brand: Rice Lake Weighing Systems
Weight, Nominal Mass 21 oz., Cast Iron, Class 7Number of Pieces 1, Finish Painted, Calibration Certificate Traceable, ASTM Forged Steel Body AdjustableBuilt-in clearance between chuck body cavity and mounting plate hub offers 0.0004" repeatability on duplicate parts. Tech-Tru system has adjusting screws that quickly move the chuck on its mounting plate.Scroll ChucksInclude chuck, jaws, wrench, and mounting screws.2-piece reversible jaw chucks Mounting plates required Additional sizes and mounting plates are available on DrillSpot.com
|
|