Calibration - Page 139

Manufacturer: Fluke Corporation Brand: Fluke Model: 2673962

Fluke polyester case for 1750 and 1760 3 phase power quality recorders.

Manufacturer: ohaus Brand: Ohaus Model: R31P3

The multipurpose Ranger 3000 compact bench scale has all of the capabilities to produce precise results rapidly for a variety of applications. With 5 weighing units and nine application modes, Ranger 3000 is the ideal scale to meet many industrial weighing needs. Portable and equipped with a rechargeable battery that will power the scale for over 200 hours, this scale is beneficial in every corner of the factory and is equipped with functions and features that elevate it to a class of its own. Standard features include a large, bright backlit display, easy setup using the SmarText menu, rapid stabilization time to improve efficiency and productivity, 3 LED check weighing lights with selectable operation and audible signal settings, RS232 port, weigh below hook, low battery indicator, auto shut-off, auto tare and more.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162AC

Fluke EI-162AC Clip-on Current Transformer (Inducing) The EI-162AC Clip-On Current Transformer (Inducing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-432

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-433

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-318

SETTING RING, 87MM

Manufacturer: LK Industries Brand: WL Walker Model: T-70021XX

16 inch.

Manufacturer: SHENZHEN VICTOR HI-TECH CO LTD Brand: Reed Instruments Model: VC01-NIST

The REED Temperature Simulator provides a quick and easy way for checking the calibration of thermocouples. It can measure and source 8 thermocouple types and 2 RTD types, plus volts and ohms, to test and calibrate almost any temperature instrument. The electrical signal that is applied to the temperature indicator and the indicators reading are compared with the simulated input temperature and the error of indication of the temperature indicator determined. Measure and source/simulate 8 thermocouples (R, S, B, E, K, J, T, and N). Measure and source/simulate 2 RTDs, Pt100 and Cu50. The meter features a simple, "no menus control", is easy to operate and has automatic calibration.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-534

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540445

Fluke a clip-on current transformer. Measuring range selectable per software: 0.01 A to 1 A and 0.1 A to 10 A. Peak current for sinusoidal currents: 3.7 A and 37 A. Intrinsic error: 0.5 percent. Frequency range: 40 Hz to 10 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.5 degree. Jaw opening: less-than 15-millimeters diameter or 15-millimeters by 17-millimeters bus bars.