Inside Measurement - Page 114

Manufacturer: JAINCO Brand: JAINCO Model: 1116

Senior Rotary microtome Spencer specifications: feed adjustments: 1-50 microns minimum thickness: one micron complete accessories object holders (3nos.): 1set knife 120mm in a box: 1no. Honing stone: 1no. Operating manual: 1no. Beware of duplicate, low quality products. A premium product by JAINCOLAB, India.

Manufacturer: INSIZE Brand: INSIZE Model: 3225-20

Tubular inside micrometer, 4-20", graduation 001".

Manufacturer: Starrett Brand: Starrett Model: 824L

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-432

The Mitutoyo 511-432 Dial Bore Gauge for Blind Holes has a measurement range of 1.4 to 2.4" and is accurate to + or - 0.0002". It is precise to 0.0005" and can measure internal diameters at positions close to the bottom of blind holes. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 685-2Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-281-5

The Brown & Sharpe style A Intrimik vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise inside dimension (ID) measurements.The micrometer is made of high-grade tool steel for durability, with a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002”, depending on the model. A knurled friction thimble helps provide quick adjustment capability. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo

2-12/ .001' I .M EXT .ROD

Manufacturer: BRENCOR Brand: BRENCOR

With foam fitted case.

Manufacturer: Starrett Brand: Starrett Model: 121BZ

Tubular inside micrometers are designed for large internal measurements beyond the capacity of most other micrometers. Each set consists of a micrometer head mounted at the end of a tubular holder in which measuring rods can be inserted and adjusted to the desired size. Final size reading in thousandths of an inch (0.001") is obtained using the micrometer head. Rods and holder are made of steel tubing, light in weight, yet very rigid. Each rod is accurately graduated with inch divisions, which are set to the size desired by a line on the holder, and firmly held by a large, knurled clamping nut. The collet has a design, insuring an extremely tight grip on the rods at any setting. Movement of screw: 1".

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument Model: 335-09-920

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Measurement can be taken closer to the bottom  Measurement can be taken closer to the bottom hole with an extension rod Highly durable because of carbide-tipped contact points Ratchet stop Technical Datas Protection level IP54 Type.40-50mm*0.001mm   Accuracy: 0.005mm NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us