|
|
-
4.8 of 5.0 with 22 Reviews
SALE PRICE: $230.41
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-646-600-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-646-600-0
|
The Fowler 52-646-600 X-tra Range Bore Gauge has a measurement range of 4 to 12" and gradient spacing of 0.0005". This direct-measuring gauge measures bores to a depth of 10" and has an insulated grip for extra stability. It uses a two-point contact system for the detection of geometry problems such as ovality and taper, and carbide-tipped contact points provided extended wear and improved abrasion resistance.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.
-
4.8 of 5.0 with 39 Reviews
SALE PRICE: $232.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 82C9
Manufacturer: Starrett
Brand: Starrett
Model: 82C9
All probes are furnished with an actuating rod.
-
4.8 of 5.0 with 37 Reviews
SALE PRICE: $254.40
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D099
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D099
Setting ring, 099 inch.
-
4.8 of 5.0 with 37 Reviews
SALE PRICE: $254.40
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D099
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D099
Setting ring, 099 inch.
-
4.8 of 5.0 with 49 Reviews
SALE PRICE: $257.20 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D1
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-0D1
Setting ring, 1 inch dia.
-
4.8 of 5.0 with 5 Reviews
SALE PRICE: $289.10
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
2.625" Holemike XT Setting Ring
-
4.8 of 5.0 with 20 Reviews
SALE PRICE: $292.14 1% OFF
Manufacturer: GOODSON
Brand: Goodson
Manufacturer: GOODSON
Brand: Goodson
Dial Indicator Only for MMCB-06
-
4.8 of 5.0 with 18 Reviews
SALE PRICE: $318.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 124MBZ
Manufacturer: Starrett
Brand: Starrett
Model: 124MBZ
|
The Starrett 124MBZ solid-rod inside micrometer set offers a range from 50 mm to 300 mm, is graduated at 0.01 mm intervals, and comes in a protective vinyl-and-steel case. The hardened, radius-ground anvils on rods are accurate. Solid-rod inside micrometers are often used for measuring the inside diameter of a cylinder or ring and when measuring parallel surfaces. The micrometer head, rods, and spacing collars are assembled to the desired range and then adjusted to obtain the measurement. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.
-
4.8 of 5.0 with 44 Reviews
SALE PRICE: $346.00
Manufacturer: Starrett
Brand: Starrett
Model: 78/782K
Manufacturer: Starrett
Brand: Starrett
Model: 78/782K
The Starrett Internal Extensions for 78 Series Internal Micrometers includes 2-12-Inch (50-300mm) sizes, 6-Inch extension size, and fits models 8XT/780XT/781XT-2 thru 12.
-
4.8 of 5.0 with 43 Reviews
SALE PRICE: $359.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Flexbar Chamfer Gage. instant Measuring of Chamfers and Tapered hole Diameters. Direct Diameter Reading to .001". - Metric Units for Reading to 0,01mm. Hardened and Precision ground 3-Blade steel plunger assures High accuracy and repeatability. No Setting masters required - Zero on surface Plate - to Reading on Gage. Model No. 16341, Chamfer Gage, 1-2" Capacity, 0-90 Degree Range
|
|