Inside Measurement - Page 28

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-152

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D108

Setting ring, 108 inch.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D108

Setting ring, 108 inch.

Manufacturer: Flexbar Brand: Flexbar

Calibrated Surface Grinding Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel; the largest variety of standards available for assessing and specify by Symbol, the Degree of roughness of machined parts, including every machining method known.

Manufacturer: Flexbar Brand: Flexbar

Planing/Shaping Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel; the largest variety of standards available for assessing and specifying - by symbol, the degree of roughness of machined parts-including every machining method known.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-401

The Mitutoyo 511-401 Dial Bore Gauge for Blind Holes has a measurement range of 15 to 35 mm and can measure internal diameter at positions close to the bottom of blind holes. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 824E

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-404

The Mitutoyo 511-404 Dial Bore Gauge for Blind Holes has a measurement range of 15 to 35 mm and can measure internal diameters at positions close to the bottom of blind holes. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 823MAZ

These micrometers are highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gauges and measuring parallel surfaces. The extension rods are made of steel tubing, light in weight, yet extremely rigid. Rods are approximately 9.5mm diameter to meet the requirements of mechanics who prefer this larger diameter. By removing the hardened and ground anvil ends (end caps) of the micrometer head, the rods may be attached to either or both ends of the micrometer as preferred. Each rod may be individually adjusted for wear by the hardened and ground anvil at the end. Tubular measuring rods are lightweight, yet extremely rigid. Rods are insulated, with the exception of 13mm and 25mm sizes also each rod is marked with length. Movement of screw: 13mm.

Manufacturer: Starrett Brand: Starrett Model: 683-3Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.