|
|
-
4.3 of 5.0 with 20 Reviews
SALE PRICE: $107.14 21% OFF
Manufacturer: Fred V Fowler
Brand: Fred V Fowler
Manufacturer: Fred V Fowler
Brand: Fred V Fowler
Please note that the case used with this model comes with an open slot for 4 In which does not come with this model.Direct inch/metric conversion presettable to ring gage or setting master.Graduation: .0005"Range: 2"-6"Fast checking of bores size, ovality, taper, etc.Lightweight ABS gage shroud for extra protection.Tungsten carbide contact points.Thermally insulated for extra stability.2-point measuring with 3-point centering.Fred V Fowler 72-646-300 2 In - 6 In Cylinder Bore Gage
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $120.30 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-7H16
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-7H16
Setting ring, 7/16 inch dia.
-
4.3 of 5.0 with 2 Reviews
SALE PRICE: $129.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 139-006
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 139-006
|
The Mitutoyo 139 series tubular vernier inside micrometer has a vernier scale in inch units for taking precise inside dimension (ID) measurements of the inside dimensions of cylinders, rings, and parallel surfaces. It may also be used with interchangeable extension pipes for a diversified range of measurement (sold separately). The vernier scale is graudated to 0.001â€, and has a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5†or 1†per revolution depending on the model. A knurled ring-type lock nut helps hold measurements in place. The micrometer and accessories come with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.3 of 5.0 with 29 Reviews
SALE PRICE: $140.40 1% OFF
Manufacturer: Moore and Wright
Brand: Moore & Wright
Model: MEB-MW316-03I
Manufacturer: Moore and Wright
Brand: Moore & Wright
Model: MEB-MW316-03I
-
4.3 of 5.0 with 27 Reviews
SALE PRICE: $141.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Precision Dial Thickness Gages. Made in Japan. Features: Gage Mounted in hand Grooved enameled frame With thumb release mechanism. High Grade steel Measuring Faces. Hardened stainless steel spindle. Hardened, ground and lapped for accuracy. Dull chrome plated indicator Case. supplied in a Deluxe velvet-lined Case. Model No. 18122, Precision Dial Thickness Gage. Range: 1.0" Throat Capacity: 1 1/8" Graduation: .001 Reading: 0-100
-
4.3 of 5.0 with 38 Reviews
SALE PRICE: $142.40
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 3011-4051
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 3011-4051
2-20'' Inside Micrometers Sets 0.001'' Increments, #3011-4051 The combining of extension rods provides a wide measuring range Supplied with a standard caliper gage for zero setting Carbide measuring faces Diameter of extension rods:φ15.5mm Resolutions: 0.001'' Use to measure 3 flute cutting heads such as end mills, taps and reamers Carbide V surface Nice fitted case Range: 2-20'', Extension rods: 0.5'', 1'', 2'' (2pcs), 4'', 8''
-
4.3 of 5.0 with 47 Reviews
SALE PRICE: $175.30
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
.312" Holemike XT Setting Ring
-
4.3 of 5.0 with 38 Reviews
SALE PRICE: $182.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-143
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-143
|
The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.3 of 5.0 with 12 Reviews
SALE PRICE: $189.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Optional Extension: For Longer Measuring Depths. Model No. 20347, Extension For Use With Gage Head Sizes .630-.787". Extension Length Is 3.937"
-
4.3 of 5.0 with 25 Reviews
SALE PRICE: $212.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 124MA
Manufacturer: Starrett
Brand: Starrett
Model: 124MA
|
The Starrett 124MA solid-rod inside micrometer set offers a range from 50 mm to 200 mm and is graduated at 0.01 mm intervals. The hardened, radius-ground anvils on rods are accurate. Solid-rod inside micrometers are often used for measuring the inside diameter of a cylinder or ring and when measuring parallel surfaces. The micrometer head, rods, and spacing collars are assembled to the desired range and then adjusted to obtain the measurement. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.
|
|