Inside Measurement - Page 57

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E08

Three points internal micrometer, 65- 8 inch graduation 0002 inch.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0054

HHIP digital electronic bore gages features zero reset allows absolute or comparative measurements extra large LCD, 360 degree rotation dual display: digital and electronic scale power supply: 3V CR2032 lithium battery true inch/mm conversion one button easy calibration product specifications: range: 2- 6"/50-160mm; probe depth: 6"; no. Of anvils: 12.

Manufacturer: Starrett Brand: Starrett Model: 683-2Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: Starrett Brand: Starrett Model: 84Z-134-6J

The Starrett 84Z-134-6J Dial Bore Gauge has a measurement range of 5 to 8.125" and gradient spacing of 0.0005". Two centralizing plungers provide accurate tool alignment within the bore. This direct-measuring gauge uses a two-point contact system for detection of geometry problems such as ovality and taper. Contact points are made of hardened tool steel contact points for wear resistance and are spring-loaded for sensitivity. The housing and knurled handle are made of aluminum for a lightweight feel and good balance. Dial indicators have jewel bearings for sensitivity and the gauge is furnished in a finished wood case.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To NIST Available Upon Request. Self-Aligning And Self-Centering Carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements. Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020"Resolution: .00005"/0.0001mm (Inch/Metric Conversion) Thimble Graduation: 0.0001" Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset (+ And -) Hold Key SPC Data Output Capability (RS232C) Model No. 20852, Digital 3-Point Bore Micrometer, Measuring Range: .425-.500"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-265

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for inside micrometers is an accessory for use with the Brown & Sharpe TESA Alesometer LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3151-3071

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-865

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002”. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To NIST Available Upon Request. Self-Aligning And Self-Centering carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements. Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020" Resolution: .00005"/0.0001mm (Inch/Metric Conversion). Thimble Graduation: 0.0001". Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset (+ And -) Hold Key SPC Data Output Capability (RS232C) Model No. 20853, Digital 3-Point Bore Micrometer, Measuring Range: .500-.650"