Capacitance & Resistance Meters - Page 41

Manufacturer: TENMA Brand: Tenma Model: BPSIN06240-72-9405

TENMA 72-9405 INSULATION RESISTANCE TESTER

Manufacturer: DUOYI Brand: Yi Duo Model: DY1000A

Specifications Earth Ground Resistance Range Resolution Precision 0.01Ω ~ 0.099Ω 0.001Ω ±1%+0.01Ω 0.1Ω ~ 0.99Ω 0.01Ω ±1%+0.01Ω 1.0Ω ~ 49.9Ω 0.1Ω ±1.5%+0.1Ω 50.0Ω ~ 99.5Ω 0.5Ω ±2%+0.5Ω 100Ω ~ 199Ω 1Ω ±3%+1Ω 200Ω ~ 395Ω 5Ω ±6%+5Ω 400Ω ~ 590Ω 10Ω ±10%+10Ω 600Ω ~ 1000Ω 20Ω ±20%+20Ω Min. Resolution 0.001Ω Working Temperature 14°F ~ 131°F Working Humidity 10%~80% LCD Size 1.12"×1.85" (28.5 x 47 mm)

Manufacturer: BROOKS INSTRUMENT Brand: Brooks Instrument

1 New Brooks Instrument Division 3604D12F2S1A Meter (Q6-6)

Manufacturer: Test Products International, Inc Brand: TPI Model: ERT1500

Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with high moisture content can degrade ground rods and connections in existing systems and increase the resistance of the system. Ground-resistance meters are used in conjunction with a variety of testing methods to troubleshoot intermittent electrical problems or as part of a regular maintenance plan.Test Products International (TPI) manufactures test and measurement equipment such as oscilloscopes, manometers, multimeters, and test leads. The company, founded in 1997, is headquartered in Beaverton, OR.

Manufacturer: T&O Brand: Toto

Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Mounting hardware.

Manufacturer: NF Corporation Brand: NF

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 4105A-H

The Kyoritsu 4105A-H digital tester performs three-pole earth resistance and two-pole voltage testing of electrical equipment and systems wiring and grounding to reduce power quality issues and avoid safety hazards. The meter is small and lightweight, with shock-resistant case material and taut-band movement. The OK light verifies proper connection between auxiliary earth resistance and lead wire connection to terminals. The tester warns the user when the resistance of auxiliary earth spikes exceeds tolerance. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The Kyoritsu 4105A-H has an IP 54 rating for limited ingress of dust and protection against water splashes and drips. Safety ratings are CE compliant, designed to safety standard IEC 61557, and rated as CAT III 300V. The test kit includes set of three test leads (red 20m, yellow 10m, green 5m), one set of measurement probes, two auxiliary earth spikes, neck strap, and a hard carrying case that holds the instrument and all testing accessories. Specifications Earth resistance range 0-20Ω/ 0-200Ω /0-2000Ω Earth voltage range 0-200V AC (50, 60Hz) Accuracy + or - 3% full scale Withstand voltage 3700V AC for 1 minute Power source (6) AA 1.5V batteries (included) Weight 600g Dimensions 105 x 158 x 70mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with...

Manufacturer: Megger Brand: Megger Model: 6311-080

The Megger 6311-080 shielded lead set comes with one black (negative) test lead that is screened and one red (positive) test lead that is not screened and is for use with the Megger BM15 and MJ15 5-kilovolt (kV) analog insulation testers in applications where there is a risk of interference from nearby conductors and where leakage from the test lead would interfere with measurements. The test leads measures 50' (15 m) and provide measurements at a distance. The uninsulated compact test clips measure 2.2 x 1 inches (58 x 25 mm, W x D, where W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back) and have a 0.7" (18 mm) jaw opening for a hands-free connection to a conductor where there is limited access. Polyvinyl chloride (PVC) insulation on the test leads protects hands from shock and heat. The test leads lock into the input jacks on the meter to help ensure a secure connection and reduce risk of shock. The insulated test leads are rated for a maximum input of 5 kV of direct current (DC) voltage. A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe ca...

Manufacturer: Megger Brand: Megger Model: MIT310A-EN

1000v insulati on tester megger _DELETE_

Manufacturer: Megger Brand: Megger Model: 6111-023

The Megger 6111 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for St...