|
|
-
3.5 of 5.0 with 49 Reviews
SALE PRICE: $217.22 6% OFF
Manufacturer: Megger
Brand: Megger
Model: 249000
Manufacturer: Megger
Brand: Megger
Model: 249000
The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $246.28 2% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: 380360
Manufacturer: Extech Instruments
Brand: Extech
Model: 380360
Measures insulation resistance of AC/DC motors, cables and power tools. 1-year limited warranty. Three test voltages 250 Volt, 500 Volt and 1000 Volt Measures AC voltage to 600 Volt Safety power lock enables handsfree operation for 3-minute test Automatic discharge when safety Press to Test button is released Auto power off and data hold Large 0.65in. LCD Automatic zero adjustment Full function indication Overload protection Measures insulation resistance to 200 Ohms Fast response for both continuity and low resistance testing CE certified CAT III-600V rating 6 AA batteries included Heavy-duty 30in. test leads Alligator clip Large probe Case with neckstrap 1-year limited warranty Model 380360
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $259.00
Manufacturer: Reed
Brand: REED Instruments
Model: R5001
Manufacturer: Reed
Brand: REED Instruments
Model: R5001
This LCR meter measures inductance, capacitance and resistance with secondary parameters such as dissipation factor (D), quality factor (Q), phase angle (Ø) and equivalent series/parallel resistance (ESR or Rp). The R5001 features a large easy-to-read LCD display with backlight, and data hold/relative functions.
-
3.5 of 5.0 with 42 Reviews
SALE PRICE: $262.00
Manufacturer: GW Instek
Brand: GW Instek
Model: LCR-09
Manufacturer: GW Instek
Brand: GW Instek
Model: LCR-09
4 Wire SMD/chip test fixture. SMD/chip components support. Suitable for SMD Range: 0603 to 1812. For LCR-800 and LCR-8000G series LCR meter.
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $299.00
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R5001-NIST
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R5001-NIST
This LCR meter measures inductance, capacitance and resistance with secondary parameters such as dissipation factor (D), quality factor (Q), phase angle (Ø) and equivalent series/parallel resistance (ESR or Rp). The R5001 features a large easy-to-read LCD display with backlight, and data hold/relative functions. This product includes a calibration certficate traceable to NIST (National Institute of Standards and Technology).
-
3.5 of 5.0 with 17 Reviews
SALE PRICE: $357.00 1% OFF
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 3132A
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 3132A
|
The Kyoritsu analog megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 400MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance continuity and lights an indicator and sounds a buzzer when a live circuit is detected. When measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter is available in a model (B009TALC6S) that measures low-resistance continuity to 20Ω and has a backlight for visibility in low light, and in a model (B009TALDUI) that measures low-resistance continuity to 500Ω and detects AC voltage to 600V. The unit has a battery voltage check that indicates the condition of the batteries. It is rated for category (CAT) III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a set of test leads, a test lead storage pouch, two 500mA/600V fuses, a shoulder strap, six 1.5V AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistance measured400MΩTest voltages250V, 500V, 1,000VMaximum AC voltage measured600V (model B009TALDUI only)Installation ratingCAT III, 300VStandards metIEC safety standards 61010-1, 61010-2-031, and 61557-1/2/4; IP51; CE markingPower(6) 1.5V AA batteriesMegohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degrade...
-
3.5 of 5.0 with 20 Reviews
SALE PRICE: $366.66
Manufacturer: Vetus
Brand: ETCR
Manufacturer: Vetus
Brand: ETCR
|
Specifications Function:Ground resistance test, Loop resistance test Power Supply:6VDC (4 PCS of AA alkaline batteries) Resistance Range:0.01-1200Ω Resistance Resolution:0.001Ω Highest Resistance Accuracy:±1%±0.01Ω Current range:0.00mA-20.0A Current resolution:0.05mA Maximum current accuracy:±2.5%±1mA Data memory:99 Sets Alarm Threshold Setting Range:Resistance: 1-199Ω Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking Working Temperature and Humidity:-20℃-55℃;20%RH-90%RH LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm Clamp Size:65mm×32mm Clamp Opening Extent:32mm Tester Weight:1160g (With batteries)(But battery not included in the package) Clamp Dimension:L×W×T: 285mm×85mm×56mm Protection Level:Dual Insulation Structural Feature:Clamp CT Shifting:Automatic shifting External magnetic field:
-
3.5 of 5.0 with 39 Reviews
SALE PRICE: $380.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: VCLAMP
Manufacturer: Megger
Brand: Megger
Model: VCLAMP
The Megger VCLAMP voltage clamp is a voltage-inducing clamp for performing ART method ground resistance tests with a Megger DET4TC2 or DET4TCR2 ground resistance tester (sold separately). The kit includes the clamp, a calibration check PCB for two-clamp measurements, and a connecting lead. The VCLAMP is used by electricians and electrical contractors to conduct ART method ground resistance tests. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
3.5 of 5.0 with 44 Reviews
SALE PRICE: $427.45 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: MG302
Manufacturer: Extech Instruments
Brand: Extech
Model: MG302
|
Insulation Tester/Multimeter with Wireless PC Interface Designed for users outside of North America because of its 433 MHz wireless transmitter frequency, the MG302 is a true RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and data recording. By adding insulation testing capabilities to this CAT IV-rated digital multimeter, electrical troubleshooters will always be equipped for insulation testing, helping to make it a more routine part of predictive maintenance with faster troubleshooting and repairs without the need for additional tools. MG302 Features Overview The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with four different test voltages for measuring resistance up to 4 GΩ with 0.001 MΩ resolution. The full-function, true RMS digital multimeter includes useful extras, like duty cycle measurements and milliamp readings for analog 4-20 mA current loops in industrial analog process controls. The MG302 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances — up to 30 feet away — to detect intermittent anomalies. Applications Insulation testers can be used to test motor, transformer windings, instruments, and appliances, check for moisture in wire and cable assemblies, safely evaluate a new wiring installation, and check for carbon tracking in breakers, relays, and switches. Extech Insulation Testers offer high sensitivity to assure reliable monitoring of low resistance motor windings. What's in the Box The MG302 comes with a remote USB receiver, Windows compatible software, test leads with alligator clips, Type K bead wire temperature probe with adapter, carrying case, six AA batteries, and user manual. The MG302 is available with NIST-traceable ce...
-
3.5 of 5.0 with 27 Reviews
SALE PRICE: $441.19 1% OFF
Manufacturer: B&K Precision
Brand: B&K Precision
Manufacturer: B&K Precision
Brand: B&K Precision
Lcr meter with cert of cal b&k
|
|