|
|
-
3.5 of 5.0 with 20 Reviews
SALE PRICE: $577.21
Manufacturer: Vetus
Brand: ETCR
Manufacturer: Vetus
Brand: ETCR
|
Specifications Function:Ground resistance test, Loop resistance test Power Supply:6VDC (4 PCS of AA alkaline batteries) Resistance Range:0.01-1200Ω Resistance Resolution:0.001Ω Highest Resistance Accuracy:±1%±0.01Ω Current range:0.00mA-40.0A Current resolution:0.05mA Maximum current accuracy:±2.5%±1mA Data memory:99 Sets Alarm Threshold Setting Range:Resistance: 1-199Ω Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking Working Temperature and Humidity:-20℃-55℃;20%RH-90%RH LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm Clamp Size:65mm×32mm Clamp Opening Extent:32mm Tester Weight:1160g (With batteries)(But battery not included in the package) Clamp Dimension:L×W×T: 285mm×85mm×56mm Protection Level:Dual Insulation Structural Feature:Clamp CT Shifting:Automatic shifting External magnetic field:
-
3.5 of 5.0 with 21 Reviews
SALE PRICE: $692.55 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2135.37
Manufacturer: AEMC
Brand: AEMC
Model: 2135.37
|
The AEMC 2135.37 kit provides the accessories needed for setup and teardown in the field when performing 4-point ground resistance testing with an AEMC meter (sold separately). The leads are color-coded according to length. The kit includes two 500ft. leads on spools (one red, one blue), two 100ft. hand-tied leads (one green, one black), one 30ft. lead (green), two 5ft. leads (one red, one blue), four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100ft. tape measure, and a carrying bag. The tape measure housing has a hand-crank for rewinding the tape after use and a handle with a rubber grip. The kit includes a carrying bag that holds all of the accessories, keeping them organized and available when needed. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA. What’s in the Box? AEMC Ground Test Kit for 4-point testing (2) 500ft. leads on spools (red/blue) (2) 100ft. leads (green/black) 30 ft. lead (green) (2) 5ft. leads (red/blue) (4) 14.5" T-shaped auxiliary ground electrodes (5) Spaded lugs 100ft. AEMC tape measure Carrying bag
-
3.5 of 5.0 with 35 Reviews
SALE PRICE: $769.74 9% OFF
Manufacturer: Applent
Brand: Applent
Manufacturer: Applent
Brand: Applent
Features: Keypad lock functionSwitch both in English and Chinese.Background-lightness adjustment functionAutomatic shutdown setBattery: 8.4V, Li, 2200mAh, chargeableMax power: ≤5WBattery capacity: Over 8 hours' continuous useApplications: All kinds of low, medium, high resistorSwitch contact resistanceEnamel-insulated wire resistanceConnector ContactRelay/switch connector contactsTransformer, Inducer, Motor, Deflection Coil winding resistanceWelding SpotWire resistanceMetal riveting resistance of vehicle, vessels, airplanePure resistanceThe resistance of motor and transformerPrinted board line and hole resistanceLow resistance character of Electromechanical ComponentsSpecifciations: Parameter:DC resistanceAccuracy:0.05%Measurement Range:10μΩ~20MΩSignal Source:I-Max:
-
3.5 of 5.0 with 24 Reviews
SALE PRICE: $819.00
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
The GEOHM C is a battery powered earth resistance measuring instrument that is ideal for the measurement of soil resistivity. It is a compact, handy, and menu-driven soil resistivity measuring instrument for 3 and 4-wire connections. The tester includes continuous monitoring of interference voltage with indication if allowable limit values are exceeded. All values are available on a large LCD display, and operation is easy with the use of 4 keys. Measurement of earth resistance for 3 and 4-wire methods, with physical considerations of the potential gradient area as related to dissipation resistance of grounding systems of various sizes. Measurement of soil resistivity with geologic analysis and calculation of dissipation resistance.
-
3.5 of 5.0 with 7 Reviews
SALE PRICE: $819.99 1% OFF
Manufacturer: T&O
Brand: Toto
Manufacturer: T&O
Brand: Toto
DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.
-
3.5 of 5.0 with 39 Reviews
SALE PRICE: $955.00
Manufacturer: Megger
Brand: Megger
Model: 1001-369
Manufacturer: Megger
Brand: Megger
Model: 1001-369
|
The Megger MIT400 series telecom and CATV digital/analog insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in telecom and CATV installations. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature to prevent testing when a circuit has a voltage of greater than 75V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.Specifications Automatic continuity testing range 0.01 to 100 Ohms (0-50 Ohms on analog range) Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Power supply 5 AA alkaline or rechargeable batteries Weight 590g / 20.73oz. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters displa...
-
3.5 of 5.0 with 8 Reviews
SALE PRICE: $985.00
Manufacturer: Megger
Brand: Megger
Model: DET3TC
Manufacturer: Megger
Brand: Megger
Model: DET3TC
|
The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties...
-
3.5 of 5.0 with 17 Reviews
SALE PRICE: $1,285.00 7% OFF
Manufacturer: Megger
Brand: Megger
Model: 6410-865
Manufacturer: Megger
Brand: Megger
Model: 6410-865
|
The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...
-
3.5 of 5.0 with 31 Reviews
SALE PRICE: $1,320.00
Manufacturer: Megger
Brand: Megger
Model: 241005-7
Manufacturer: Megger
Brand: Megger
Model: 241005-7
|
The Megger 241005-7 series duplex test lead with gold-plated Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This 7' (2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The gold-plated Kelvin clip provides low contact resistance and has better resistance to corrosion and wear than a silver plated clip. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a jaw opening of 0.5" (1.3 cm).A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommu...
-
3.5 of 5.0 with 24 Reviews
SALE PRICE: $1,325.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 242011-30
Manufacturer: Megger
Brand: Megger
Model: 242011-30
|
The Megger 242011 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger 247100, 247101, DLRO10HD, DLRO10, and DLRO10X digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is ...
|
|