Capacitance & Resistance Meters - Page 64

Manufacturer: Extech Instruments Brand: Extech Model: MG300-ETK

Electrical Troubleshooting Kit Kit includes 3 compact tools that are indispensable at a customer site for electrical installation, troubleshooting, and repair: MG300 13 Function, Wireless, True RMS Multimeter/Insulation Tester with 1000V test voltage and 4000MΩ range; 42509 12:1 Infrared Thermometer with high/low alarm and fast 2-color display for processes that require temperature control and monitoring and MA430T 400A True RMS AC Clamp Meter with built-in non-contact voltage detector and ideal for noisy or non-sinusoidal AC measurement. 42509 Versatile Alerts Boost Productivity The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with 4 different test voltages for measuring resistance up to 4 GΩ with 0.001MΩ resolution. The full-function, true RMS digital multimeter includes useful extras, like duty cycle measurements and milliamp readings for analog 4-20mA current loops in industrial analog process controls. The MG300 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances – up to 30 feet away – to detect intermittent anomalies. 42509 Versatile Alerts Boost Productivity This fast-responding (150 ms) IR thermometer uses an innovative alert system: an audible alarm is complemented by an illuminated display that changes from blue for normal conditions to bright red for alarm conditions. This color-coded alert function enables users to scan areas and focus on identifying anomalies without stopping to constantly evaluate specific temperature readings. MG300 Insulation Tester/Multimeter with Wireless PC Interface The MG300 is a True RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and datalogging. By adding insulation testing capabilities to this CAT...

Manufacturer: Extech Instruments Brand: Extech Model: MG300-MTK

Motor & Drive Troubleshooting Kit This kit contains three compact tools that are indispensable at a customer site for installing and troubleshooting 3-phase motors and drives. Supplied in a storage case, this kit includes the MG300 13 Function, Wireless, True RMS Multimeter/Insulation Tester with 1000-volt test voltage and 4000 MΩ range; 480403 Motor Rotation and 3-Phase Tester, which checks phase sequence and indicates rotation direction of the motor; and MA430T 400A True RMS AC Clamp Meter with built-in non-contact voltage detector, which is ideal for noisy or non-sinusoidal AC measurement. MG300 Features Overview The MG300 is a True RMS multimeter that incorporates a digital insulation resistance tester (or megohmmeter) with four different test voltages for measuring resistance up to 4 GΩ with 0.001 MΩ resolution, and duty cycle measurements and milliamp readings for analog 4-20 mA current loops in industrial analog process controls. The MG300 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances — up to 30 feet away — to detect intermittent anomalies. 480403 Features Overview This Phase Sequence and Motor Rotation Tester has a 40 to 600 volt rated range for testing the phase orientation of 3-phase power sources over a 2 to 400 Hz frequency range. The LEDs indicate phase orientation — clockwise or counter-clockwise — and whether each of the phases is live. Also, the 480403 indicates rotation direction of the motor to ensure that it doesn't get damaged from incorrect wiring. The meter comes complete with cable and three large color coded alligator clips, pouch case, and 9-volt battery. MA430T Features Overview The MA430T is a compact 400 amp AC clamp meter that enables users to take measurements in tight spaces while offering an ample 1.2-inch (30mm) jaw op...

Manufacturer: Megger Brand: Megger Model: MIT310-EN

The Megger MIT300 series insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms. The unit has a test inhibit function that prevents testing on circuits carrying over 50V. The tester is safety rated to European Standard EN61010-1, Category III, 600V. The unit is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The unit has a rubberized outer case for protection against bumps and short drops. The Megger MIT300 series is commonly used by electricians and electrical contractors.Specifications Continuity testing range 0.01 to 100 Ohms Insulation resistance range 0 to 1,000 megohms Voltage testing range 0 to 600V AC/DC Voltage test inhibit level 50V Power supply 8 AA alkaline or rechargeable batteries Weight 980g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 203 x 148 x 78mm / 8 x 5.7 x 3.2 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function me...

Manufacturer: Ideal Industries Brand: Ideal Industries Model: 61-796

The Ideal 61-796 earth ground tester performs 2-point and 3-point fall-of-potential or simplified ground resistance testing when it is not possible to use auxiliary ground stakes, and measures ground voltage for new and existing buildings, structures, equipment, and electrical systems. The auto-ranging feature automatically determines the correct value range for the measurements. The data hold function with screen icon allows the user to retain the measurements on the display for manual recording. The battery indicator alerts the user when batteries are low to ensure accurate measurements. When in use, the 2 milliAmp (mA) measuring current does not trip ground fault breakers of the circuit under test. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The Ideal 61-796 tester comes with a set of three test leads, two auxiliary earth spikes, a simplified measurement probe, a hard carrying case, and an instruction manual. Applicable safety standards are IEC/EN 61010-1 and Installation CAT III 200V. The meter is rated for use at pollution degree 2. Specifications Earth resistance ranges and resolutions 0 - 20Ω range (0.01Ω resolution); 0 - 200Ω range (0.1Ω resolution); 0 - 2000Ω range (1Ω resolution) Earth resistance accuracy + or - 2% reading + 2 digits or + or - 0.1Ω Maximum earth voltage 0-200V AC, 40-500Hz Earth voltage accuracy + or - 1% reading + 2 digits Operating humidity 80 percent Operating temperature 32 to 104 degrees F Power source (8) 1.5V AA batteries (included) Weight 1361g/3lbs. (including batteries) Dimensions 210 x 210 x 100mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and cl...

Manufacturer: Extech Instruments Brand: Extech Model: MG300-NIST

MultiMate/1000V Insulation Tester with Wireless PC interface (915MHz). Wireless USB interface transmits measurement data to a PC. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: AEMC Brand: AEMC Model: 3620 Kit-300ft

The AEMC 3620 portable analog ground resistance tester with 300 ft. leads performs 3-point fall-of-potential ground resistance testing and 2-point continuity tests on bonding, and is suitable for rugged use by maintenance crews performing multiple tests. The compact unit is well-suited for a range of applications, such as testing single rod and small ground grids at telecommunications sites, cellular towers, and for lightning protection systems, grounded equipment, and new construction. The tester is designed for ease of use, with “connect–press–read” operation, three color-coded terminals, and a large Press to Measure button. The tester displays direct readings from 0.5 to 1000Ω, with a separate marking for 25Ω. A manual zero adjust is provided for accurate readings. The instrument is engineered to reject high levels of interference in difficult conditions, such as high stray currents that can affect accuracy. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The AEMC 3620 double-insulated tester with CE mark meets or exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. It is fuse-protected and can withstand 250V RMS in the event of a system fault with spikes of 3000V AC or 1000V DC. Safety ratings include EN61010-1, CAT III, and pollution degree 2. The tester kit includes two 300ft. color-coded leads (one red, one blue), two 100ft. leads (one green, one black), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, and a 100ft. tape measure, a carrying case for the tester, and a carrying case for the kit accessories.Specifications Measurement range 0.5 to 1000Ω Operating frequency 128Hz square wave Test current 10mA Resolution 10mΩ Accuracy + or - 5% of reading + 0.1% of galvanometer scale length Operating temperature range -10 to 55 degrees C/14 to 131 degrees F Power source (8) 1.5V AA batteries (included) Weight 2.9lbs./1.3kg Dimens...

Manufacturer: Amprobe Brand: Amprobe Model: AMB-45

Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.

Manufacturer: FLIR Systems Brand: Extech Model: LCR200

' LCR Meter, Inductance Range 20microH to 2000H, Inductance Accuracy +/-0.5 Percentrdg +5 digits), Capacitance Range 20pF to 20mF, Capacitance Accuracy +/-0.5 Percentrdg +5 digits), Resistance Range (Ohms) 20ohms to 200Mohms, Resistance Accuracy +/-0.5 Percentrdg +5 digits), Display Dual LCD, Counts 20, 000/2, 000, Test Frequencies 100Hz, 120Hz, 1kHz, 10kHz, 100kHz, Auto Power Off Yes with disable, Audible Continuity N/A, Battery Type 9V '

Manufacturer: Megger Brand: Megger Model: 6410-956

The Megger 210600 insulation tester measures insulation resistance and voltage in electrical systems, generators, motors, and transformers. The autoranging digital meter has manual knob for test voltage selection. The unit has test voltages of 100, 250, 500, and 1,000V direct current (DC). The tester measures insulation resistance from 0 to 199.9 megaohms with the 100 and 250V test voltages and from 0 to 1,999 megaohms with the 500 and 1,000V test voltage and voltage from 0 to 600V alternating current (AC) or DC. The LCD screen indicates test results digitally. The tester is safety rated to European Standard EN61010-1, Category III, 300V line to ground and 500V line to line. The Megger 210600 is commonly used by electricians and electrical contractors.Specifications Insulation resistance range (100 and 250V test voltage) 0 to 199.9 megaohms Insulation resistance range (500 and 1,000V test voltage) 0 to 1999 megaohms Voltage testing range 0 to 600V AC/DC Power supply 6 AA batteries Weight 0.98kg / 2.2 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III, 300V line to ground and 500V line to line Dimensions 180 x 125 x 125mm / 7 x 5 x 5 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphi...

Manufacturer: Ammoon Brand: ammoon

This digital insulation resistance tester has stable performance and reliable result. With large LCD display, easy to read.Features: Reliable insulation resistance tester with stable performance. Perfect protective function, it can withstand the impact of short-circuit and offset voltage. Locking function of test button, wide measurement range, convenient to use. Powered by 6 batteries(not included), with low power consumption. Voltage for your choice: 500V, 1000V, 2500V. Large LCD display, easy to read.Specifications: Voltage: 500V / 1000V / 2500V Measurement Range: 500V 2000MΩ: 10M-2000M 500V 20GΩ: 200M-20G 1000V 2000MΩ: 50M-2000M 1000V 20GΩ: 500M-20G 2500V 2000MG: 100M-2000M 2500V 20GΩ: 1000M-20G Resolution: 1M / 10M AC Voltage: 750V Resolution: 1V Current: Max.280mA Operating Temperature: 0-40°C Operating Humidity: 30%-80%RH Power Supply: 6 * 1.5V AA Battery (not included) Item Size: 18 * 11 * 5cm / 7.1 * 4.3 * 2in Item Weight: 441g / 15.5oz Package Size: 24 * 18 * 7.5cm / 9.4 * 7.1 * 3in Package Weight: 733g / 25.8ozPackage List: 1 * Insulation Resistance Tester(battery not included) 1 * Pair of Test Lead 1 * Pair of Test Clip