Capacitance & Resistance Meters - Page 60

Manufacturer: Jones Stephens Brand: Jones Stephens

JS 2-1/8" ID (2" CTS) White Self-Sealing Pipe Insulation, 1/2" Wall Thickness, 2.620 R Values - I53218WFeatures: 100% closed cell polyethylene UPS shippable cartons - CARTON QUANTITIES ONLY Complete seal on hot or cold pipe Two strips of self-adhesive mylar seal easily at any length

Manufacturer: Jones Stephens Brand: Jones Stephens

JS 2-1/8" ID (2" CTS) White Self-Sealing Pipe Insulation, 1/2" Wall Thickness, 2.620 R Values - I53218WFeatures: 100% closed cell polyethylene UPS shippable cartons - CARTON QUANTITIES ONLY Complete seal on hot or cold pipe Two strips of self-adhesive mylar seal easily at any length

Manufacturer: AEMC Brand: AEMC Model: 2130.6

The AEMC tape measure is designed specifically for use with ground resistance testers. Length of the tape measure is 100 feet. The tape measure housing includes a handle with a rubber grip and a hand-crank for rewinding the tape measure. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

Manufacturer: XZB Brand: XZB

SPECIFICATIONS Measuring Style 2 lines / 3 lines Measuring Range 0.000~2Ω 0.00~20Ω 0.0~200Ω Accuracy ±2%rdg±0.01Ω(2Ω) ±2%rdg±3dgt(20Ω/200Ω) Grounding Steel Nail 2 pcs Grounding Line 5 lines Grounding Voltage ±1%rdg±4dgt PACKING INFORMATION Power AAx6 battery(Not included) Product Net Weight 644g Product Size 163x135x79mm Packing Knapsack Standard Carton Size 61.5x38x27cm Standard Carton Gross Weight 6kg Accessories: 5 x Grounding lines 2 x Steel nails 1 x Carry Bag PDF Manual

Manufacturer: GW Instek Brand: GW Instek Model: LCR-06A

4 Wire kelvin clip test lead. Odd-shaped components support. Suitable for low R or high C. For LCR-8101G, LCR-800 series LCR meter.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KI0203

Capacitive Sensor, M30 X 1.5, Plastic Thread, Sensing Range: 15 Mm, Non-Flush Mountable, 2-Wire, Ac/Dc, Operating Voltage: 20...250V Ac/Dc, Normally Closed, Cable, 2 M, Pvc Cable, 2 X 0.5 Mm², Increased Immunity To Conducted Radio Frequency Interference, Housing Material: Pbt.

Manufacturer: Megger Brand: Megger Model: 250575

The Megger 250575 three-piece test lead set includes three test leads and is for use with the Megger 250302 ground resistance tester. The test leads are color-coded to help ensure proper connection.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KG5065

Capacitive Sensor, M18 X 1, Plastic Thread, Sensing Range: 12 Mm, Non-Flush Mountable, 3-Wire, Dc Pnp/Npn, Operating Voltage: 10...36 V Dc, Current Consumption: 20 Ma, Normally Open/Closed Programmable, Quick Disconnect, M12 Connector, Teach Function, Electronic Lock, Automatic Load Detection Pnp/Npn, Housing Material: Housing: Pbt Connector: Pc Buttons: Tpe-U.

Manufacturer: RT ENGINEERING Brand: RT ENGINEERING

1 New Rt Engineering Dpm4 Digital Panel Meter (E6)

Manufacturer: Megger Brand: Megger Model: 249000

The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.