Capacitance & Resistance Meters - Page 55

Manufacturer: Generic Brand: Generic

Description:One key operation with automatic power shutdownOperates with MK328 microcontrollersDisplaying the results to a 128x64 graphic LCD-Display,display richer content, illustrations at a glanceInstrument with bracket, easy to useUse 9V battery, with the battery compartment for easy battery replacementSpecification:Affect the accuracy of one-thousandth dependent resistor using a thin film resistor, and the remaining one percent use thin-film resistors.Current job: When 9V voltage, stable operating current of about 20mAMaterial:PlaticDimensions: Approx.83 (W) X 152 (height) X34 (depth) mm.Package Includes:1xMK-328 TR LCR ESR Tester( The Battery is NOT included)

Manufacturer: Hioki Brand: Hioki Model: 9050

The Hioki 9050 Earth Nets are used to perform ground resistance testing when the grounding rod cannot be driven into the ground, but water can penetrate. Earth Nets are an accessory for Hioki HiTester model 3151 (sold separately). Hioki manufactures memory recorders, automatic test equipment, and electronic testing and measurement instruments. The company, founded in 1935, is headquartered in Japan and has a U.S. office in Cranbury, NJ.

Manufacturer: DIXSON Brand: Dixson

Dixson 051P Inches Meter (N2-3)

Manufacturer: CANADIAN GENERAL ELECTRIC Brand: CANADIAN GENERAL ELECTRIC

New Canadian General Electric 53-100 L741 Pz Current Meter 0-150Vdc (X5-14)

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KF5001

Capacitive Sensor, M12 X 1, Metal Thread, Sensing Range: 4 Mm, Flush Mountable, 3-Wire, Dc Pnp, Operating Voltage: 10...36 V Dc, Current Consumption: 12 Ma, Normally Open, Quick Disconnect, M12 Connector, Increased Immunity To Conducted Radio Frequency Interference, For Position Detection Of Dry Bulk Materials And Liquids, Housing Material: Stainless Steel 316 L/1.4404 Peek (Polyether Ether Ketone).

Manufacturer: Duoyi Brand: Yi Duo Model: DY4102

Features:Ground resistance measurements from 0.01¦¸ to 2000¦¸ with 0.01¦¸ resolutionLow battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4102 Earth Ground Resistance Tester1 * Accessory Kit (including Earth Bars And Wires, Simplified Test Wire for Earth Resistance)1 * Carry Case

Manufacturer: EKM Metering Inc Brand: EKM Metering Inc.

EKM Metering's EKM-23IDS-N is a 50Hz 230 volt energy meter for metering 230V, single-phase 2-wire systems around the world(not in the US). This is a revenue-grade kWh smart submeter. It is ideal for metering any 230v load to the high accuracy required for billing purposes, or for just tracking usage. This meter uses very powerful industrial grade RS-485 communications. This is the 230 volt version of our EKM-25IDS-N which is a 120/240 volt 3-wire meter (for USA power). RS-485 communications allow you to instantaneously get much more data out of the meter. It will be more reliable and accurate than other forms of meter data, such as pulse output. You can connect up to 256 of these meters daisy chained together on up to 4000 feet of wire. This string of meters can then be connected to one of our converters for reading the meters with a computer, over the internet or LAN, USB, or Serial Ports. Fully supported by our, remote reading, EKM Dash software. State-of-the-art, fully solid-state kWh meter with RS-485 and Pulse Output, 800 pulses per kWh pulse output Accurate to within 1%, LCD readout in hundredths of a kWh, to 99999.99 kWh. Compact, very easy to install with simple DIN-rail mounting. Wires pass through 3/8+" diameter tubes in the meter body--Will accept some (but not all) 2AWG insulated wire. Usage data is stored in the meter even if it loses power for up to 10 years. Most commonly a white neutral and a black or red hot wire, 230V between them. Very voltage tolerant--the meters will tolerate voltages from 160V to 300V. Perfect for for submetering electrical usage in countries outside of the U.S. Meter your solar installation, power generation facility, rental unit, or any other device that uses 50Hz 230 volts. This meter will return kWh, Reverse kWh, Voltage, Current (Amps), Power (kW), Power Factor (Cos Θ), Maximum Demand.

Manufacturer: Megger Brand: Megger Model: GA-00384

The Megger four-piece sensing cable kit includes a 1.6' (0.5 m) current cable, connection plate, voltage sensing cable, and ground cable for use with the Megger MOM2 microhmmeter or other compatible low-resistance ohmmeters. The kit is used for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Ideal-tek Brand: IDEAL-TEK AA ANTI HI TECH

Smart Tweezers greatly simplifies testing and troubleshooting process. Its unique design combines a pair of gold-plated SMD tweezers with ergonomic shielded handles and a precise full featured LCR impedance meter in a compact, lightweight instrument. Smart Tweezers measures electronic component's capacitance, resistance and inductance with high speed and precision by evaluating circuit impedance. It is a perfect solution for testing and identification of Surface Mount Devices (SMD) as well as for troubleshooting of complex electronic systems.

Manufacturer: Megger Brand: Megger Model: 6420-111

The Megger 6420-111 carry case holds and protects a Megger 212000 series insulation resistance tester (sold separately). The leather case holds a Megger 212000 series insulation resistance tester and included accessories for easy carrying. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.