Capacitance & Resistance Meters - Page 54

Manufacturer: Fluke Corporation Brand: Fluke Model: 4692725

The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.

Manufacturer: AEMC Brand: AEMC Model: 3620

The AEMC 3620 portable analog ground resistance tester performs 3-point fall-of-potential ground resistance testing and 2-point continuity tests on bonding, and is suitable for rugged use by maintenance crews performing multiple tests. The compact unit is well-suited for a range of applications, such as testing single rod and small ground grids at telecommunications sites, cellular towers, and for lightning protection systems, grounded equipment, and new construction. The tester is designed for ease of use, with “connect–press–read” operation, three color-coded terminals, and a large Press to Measure button. The tester displays direct readings from 0.5 to 1000Ω, with a separate marking for 25Ω. A manual zero adjust is provided for accurate readings. The instrument is engineered to reject high levels of interference in difficult conditions, such as high stray currents that can affect accuracy. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The AEMC 3620 double-insulated tester with CE mark meets or exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. It is fuse-protected and can withstand 250V RMS in the event of a system fault with spikes of 3000V AC or 1000V DC. Safety ratings include EN61010-1, CAT III, and pollution degree 2. The tester includes batteries and a safety-yellow carrying case with O-ring rated to IP 50.Specifications Measurement range 0.5 to 1000Ω Operating frequency 128Hz square wave Test current 10mA Resolution 10mΩ Accuracy + or – 5% of reading + 0.1% of galvanometer scale length Operating temperature range -10 to 55 degrees C/14 to 131 degrees F Power source (8) 1.5V AA batteries (included) Weight 2.9lbs./1.3kg Dimensions 220 x 136 x 150mm/8.7 x 5.4 x 5.9 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal ...

Manufacturer: Megger Brand: Megger Model: 45552EL-AMZN

The Megger industrial insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in electrical systems. The auto ranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature prevents testing when a circuit has a voltage of greater than 50V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.

Manufacturer: GW Instek Brand: GW Instek Model: LCR-816

The LCR-800 Series are high-end digital LCR meters for component/material measurements, applicable to various R and D activities and assembly lines. The large 240 x 128 dot matrix LCD display provides ample room for two measurement items and setup parameters, allowing you to grasp measurement results quickly. All test modes are able to measure supplementary factors, such as R/Q, C/D, C/R, L/Q. 100 sets of measurement setup memory allow sharing a single unit among multiple testing conditions or sites. For a better viewing experience in a standard PC monitor, proprietary Windows based software is accessible via the RS-232C terminal. The handler interface is also a standard feature for meters. 100Hz to 2kHz test frequency. 0.1 Percent accuracy. Measures 330mm width by 149mm height by 437mm depth.

Manufacturer: Megger Brand: Megger Model: 242002-18

The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35" (9 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization ...

Manufacturer: AEMC Brand: AEMC

The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test it. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Three new features unique to AEMC® are: Test frequency selection provides more accurate results in inductive environments Touch voltage indication  indicates the voltage on the display along with a warning buzzer when the voltage derived from current and resistance measurements detect a potentially dangerous touch condition Loop resistance indication alerts the user to the fact that the measurement may not be ground resistance The Ground Resistance Tester Models 6416 and 6417, measure ground rod and grid resistance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting the ground system under test or de-energizing them. The Models 6416 and 6417 simply clamp around the ground conductor or rod and measure the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.   Two new features unique to AEMC ® are test frequency selection and touch voltage indication. The ability to select the test frequency provides more accurate results in inductive environments

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument®

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product Description Four-Point Probe Resistance Tester(DC) is suitable for the use in the testing of the sheet resistance and resistivity of ITO coated glass, FTO coated glass, AZO coated glass, and other conductive thin film that with uniform and rigid structure. Technical Datas  1) Testing resistance range:10 μΩ - 2.00 kΩ (Five testing resistance range with different testing current) 2) With the function of sorting, is suitable for the use in commercial manufacture. 3) The deviation of the Resistance Tester：Please refer to the Table 4. 4) The type of Four-Point Probe: Linear four probe. 5) The Material of the Four-Point Probe: tungsten carbide . 6) The distance between two neighbouring probes :1mm 7) The deviation of the distance between two neighbouring probes:

Manufacturer: COLE-PARMER Brand: AEMC

What's Included: Two leads and one guard test lead for high insulation measurements, eight NiMH rechargeable batteries, DataView® software, and soft accessory bag. Wide test range for additional application flexibility Wide measurement range from 10 k Ω to 30 T Ω Fixed or programmable test voltage from 40 V to 10/15 kV 5 mA charging current Large backlit LCD screen with digital display, bargraph and R(t)+u(t), i(t), and i(u) graphs Automatic calculation of DAR / PI / DD /R (ppm/V) ratios Multiple test modes: voltage ramp and step with burning, early break, and I-limit modes 3 tiers to optimize measurement stability Calculation of R at a reference temperature Storage of 80,000 measurements and real-time clock Optically-isolated USB communication for data transfer to PC and report generation with included DataView® software

Manufacturer: Triplett Brand: Triplett

Triplett Meter 0-150 Dc Volts 320-Gl (8912)

Manufacturer: Hioki Brand: Hioki Model: 9751-03 Color: Blue

Alligator clip for high voltage insulation HiTester. Blue color. 1 Year warranty.