Capacitance & Resistance Meters - Page 58

Manufacturer: Megger Brand: Megger Model: 1000-365

The Megger DET4TC2 four-terminal ground resistance tester with clamps measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing. It can take measurements using the attached rod technique (ART), which tests on-site grounds without requiring the utility connection to be disconnected. It comes with a current clamp for measuring conductor current and electrode resistance and a voltage clamp for stakeless ground measurements, and when used with ART capability, the clamps can be used for taking fall of potential measurements. The clamps have two jaws that can accommodate a conductor up to 2.1" (52 mm) in diameter. The tester has a maximum resistance input of 200,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TC2 comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, four right-angle terminal adaptors, a field calibrator for measurement accuracy, and one voltage and one potential clamp. The tester's liquid crystal display (LCD) is backlit for readability in low light.The DET4TC2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The tester comes in a hard polypropylene case for transport and storage. The case has an ingress protection rating of IP54, meaning it protects against the ingress of dust and splashing water, making it suitable for outdoor use. The DE...

Manufacturer: Amprobe Brand: Amprobe Model: DGC-1000A

The Amprobe DCG-1000A clamp ground resistance tester is a ground resistance tester that measures ground resistance, current, and continuity in multi-grounded electrical systems. This true RMS (root mean square) meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform. The clamp-on head enables the user to measure resistance on a ground rod in a multi-ground system without the use of auxiliary ground rods and without disconnecting the other grounds. The unit does not require any additional electrodes or test leads. The tester measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A. It is safety rated to European Standard 61010-2-32 Category III 300V and Category II 600V. The four-digit LCD screen indicates values up to 9999. The unit is powered by one 9V batter (installed), which provides power for 3,000 measurements. The DCG-1000A is designed for use by electricians and electrical contractors. Specifications Power supply 9V battery (one, installed) Ground resistance range 0.025 to 1,500 ohms Current range 0 to 10A Weight (including battery) 1.4 lb./ 640g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-2-32 Cat III 300V and Cat II 600V Dimensions 10.1 x 3.9 x 1.9 inches /257 x 100 x 47mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test m...

Manufacturer: Megger Brand: Megger Model: 1000-345

The Megger DET4TC2 four-terminal ground resistance tester measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing. It can take measurements using the attached rod technique (ART), which tests on-site grounds without requiring the utility connection to be disconnected. The tester has a maximum resistance input of 200,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TC2 comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, and four right-angle terminal adaptors. The tester's liquid crystal display (LCD) is backlit for readability in low light. It can be used with current and voltage clamps (not included) for stakeless ground measurements in areas where stakes cannot be driven and for taking fall of potential measurements when used with ART capability.The DET4TC2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The tester comes in a hard polypropylene case for transport and storage. The case has an ingress protection rating of IP54, meaning it protects against the ingress of dust and splashing water, making it suitable for outdoor use. The DET4TC2 operates on eight 1.5V alkaline AA batteries (included). A low-battery indicator signals when the batteries need to be replaced.SpecificationsMaximum ground resistance input200,000 ohmsMaximum ground voltage i...

Manufacturer: AEMC Brand: AEMC Model: 6471 Kit-300ft

The AEMC 6471 multi-function digital ground resistance tester with AC current probes and 300 ft. leads performs 2-clamp testing, 2- and 4-wire bond resistance testing, 3- and 4-point ground resistance testing, ground coupling, selective ground resistance, and soil resistivity testing in rugged conditions, such as field maintenance with numerous tests. The tester is designed for ease of use with “connect–press–read” operation, a large easy-to-read LCD screen, and user alerts. For higher accuracy in electrically noisy environments, the tester can be operated in manual or automatic frequency scan mode from 41 to 513Hz. Test voltage of 16V or 32V can be selected up to 250 milliAmp (mA) test current. The tester automatically recognizes all electrode connections and their resistance value. The auto power-off feature turns off the tester after a set period for power management. The tester’s software (included) is compatible with Microsoft Windows XP, Windows Vista, Windows 7, and Windows 8. It enables remote set-up and operation of all measurements, and provides data storage, real-time display, analysis, report generation, and system configuration. Up to 512 complete test results can be stored in memory for recording data in the field and then analyzing readings when convenient. After taking measurements, reports are automatically generated. The AEMC 6471 exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. The double-insulated tester is compliant with grounding standards IEC 61557 parts 4 and 5. Safety ratings include EN 61010-1, CAT IV 50V, and pollution degree 2. When closed, the carrying case has an IP 54 rating that protects the instrument from dust and water. The tester kit includes two current probes (clamps), two 300ft. color-coded leads on spools (one red, one blue), two hand-tied 100ft. leads (one green, one black), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, 100ft. tape measure, DataView software, rechargeable NiMH batte...

Manufacturer: Megger Brand: Megger Model: 247000

The Megger 247000 series digital low-resistance ohmmeter measures resistance in switch and circuit breaker contacts, transformers, generators, motor windings, metal alloys, graphite electrodes and other low-resistance electrical wiring. The meter is autoranging and digital for safety and ease of use. Kelvin-type four-wire measurement of resistance eliminates errors caused by the lead and contact resistances of the meter. Measurements taken by the ohmmeter are accurate to + or – 0.25%. The digital readout has an automatic zero circuit to eliminate field test inaccuracies. The 247000 series is used by electricians and electrical contractors.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. Meters measure electrical properties and are safety rated to measure a specific range of results. The range on the meter should be higher than the maximum anticipated value to be measured. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault lo...

Manufacturer: COLE-PARMER Brand: AEMC

The Digital Ground Resistance Tester Model 6472 is a portable measurement instrument designed to measure Bond Resistance, Ground Resistance (with and without clamps), Soil Resistivity, Earth Coupling, Step & Touch Potential. When used in combination with the GroundFlex® Adapter Model 6474 (factory supplied product only), Power Transmission Tower and Tower Leg Ground Resistance testing is also available. The Model 6472 measures from 0.01 to 99.99kÙ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. The adjustable test frequency (either manual or automatic) from 40 to 5078Hz test voltage provides rejection of high levels of interference, allowing it to be used under difficult conditions such as the presence of high stray currents that normally affect accuracy. Up to 512 test results can be stored in internal memory for later recall to the display or downloaded to a PC using DataView® software (included) for Automatic Report Generation, Automatic Fall-of-Potential Plot Generation, Frequency/Resistance Plots and much more. What's Included: Rechargeable NiMH batteries, optical USB cable, power adapter 110/240V with power cord 115V US, DataView software, and manual. KIT also includes: two 150 to 500 ft (depending on catalog #) color-coded leads on spools (red/blue), two 100 ft color-coded leads (hand-tied, green/black), one 30 ft lead (green), four T-shaped auxiliary ground electrodes, set of five spaded lugs, one 100 ft AEMC® tape measure, and carrying bag. Measure ground resistance , soil resistivity, and bonding resistance with one instrument 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation 3-Point Fall-of-Potential measurement 3-Point earth coupling measurement Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments Earth coupling testing

Manufacturer: Topshop Brand: Topshop

Features: 1.the voltmeter with full enclosure, potting fully waterproof design, a long soak in the water can still work without damage, more moisture, oil, dust, vibration. 2.the voltmeter display uses LED digital tube 0.28 inches. 3.the voltage meter wiring simple, just take two lines in the table have reverse protection, reverse does not burn. Specification: Dimensions: As shown in the pictures Type: 3 digits 0.28″ Led color: blue/red/green/yellow(Please leave note which color you want,or i will send you red color.thanks). Range: dc 3.50-30.0V Supply voltage: DC3.50-30.0V Cable length: 85mm Fixed hole diameter: 3mm(approx.) Reading per second: 2 The power consumption: Static about 15 mA Accuracy: 1% (±1 digit) Operating Temperature: -10°C~65°C Potting material Epoxy-resin Glue Wiring: Red: Power Supply +, Measure + Black: Power Supply -, Measure - Reverse polarity protection: Yes Application: used for battery voltage measuring on electric vehicles, electric cars, electric motor cars, and so on. Package Included: 1x DC Voltmeter(color as you choice)

Manufacturer: Instek Brand: GW Instek Model: GTL-232

RS-232C Cable. 9-pin female to 9-pin female type. Null modem for computer. For GDS-2000, GDS-800 Series, GRS-6032A/6052A Oscilloscopes; SFG-830 Generators, LCR-816/817/819/821, GPT/GPI-700A Series Meters, and PSM-2010/3004/6003, GDM-8255A/8251A Power Supplies.

Manufacturer: KKmoon Brand: KKmoon

DM6013L Handheld Digital Capacitance Meter Capacitor w/ LCD BacklightFeatures: Automatic in zeroing and polar selection Wide measuring range, covering 9 measuring sections from 0.1pF to 20,000uF Max. display: 1999 counts(3 1/2digits) Data Hold LCD backlightSpecifications: 200pF/2000pF/20nF/200nF/2uF/20uF/200uF ±0.5% ; 2000uF ±2.0% ;  20mF ±4.0%General Characteristics: Dimension: 143 * 75 * 32mm Product Weight: 200g Power Supply: 1 * 9Vbattery (not included) Package Size: 15.5 * 10.5 * 4.5cm / 6 * 4 * 1.7in Package Weight: 252g / 8.9ozPackage List: 1 * DM6013L Handheld Digital Capacitance Meter 1 * Pair Test Lead 1 * English Manual

Manufacturer: Generic Brand: Generic Model: STK0151007441 Color: Multicolored

Description:Brand new and high qualitymodle: LC100-ASupply power: +5v ,mini USB interfaceMeasurement accuracy:1%Capacitance measuring range: 0.01 pF - 10uFThe minimum resolution: 0.01 pFBig Capacitance measuring range:1uF-100mF/minimum resolution:0.01UFInductance measuring range: 0.001 uH - 100mHBig inductance measuring range: 0.001 mH - 100HThe minimum resolution: 0.001uHTest frequency range: L/C about 500KHZ/Big inductance 500HZEffective display digits: 4 digitsLCD display mode: 1602Size: Approx. 85x50x20MMSpecification:ICSH014A is a "Capacitance, Inductance Measuring" module.Engaged in the development of electronic engineers often need to measure inductance and capacitance, and inductance capacitance meter sold on the market price is higher, and the measurement of small capacitance inductance and small error, this instrument based on LC resonant principle, join the accurate measurement of high-speed micro controller calculation, small capacitance can be measured the inductance 1uH and less than 1pF, the maximum this is also the characteristics of the instrument, particularly suitable for microwave production and switching power supply transformer, inductance measurement.Four measured mode for ICSH014A (LC module) :1.C mode...... Capacitance (0.01pF-10uF).2.L mode...... Inductance (0.001uH-100mH).3.HL mode...... Large inductance (0.001mH-100H)4.HC mode...... Large capacitance (1uF-100mF)All stalls are automatic range, the use is very convenient. In this way, ICSH014A Whether from the measurement range and measurement precision can completely replace any kind of inductance and capacitance measuring instrument on the market, the performance parameters to the digital bridge, is a highly cost-effective instrument.Package Includes:1x High Precision L/C Meter Board LC100-A1x Mini USB Cable for Power Supply