Electrical Testing - Page 184

Manufacturer: Geekvape Brand: Rollingever

Specifications Size: 93.6mm*75.4mm*24.7mm Resistance Measuring Range: 0.01 - 9.9Ω Lowest resistance rate: 0.1Ω Connection : 510 elastic poles Battery: Lithium 18650, 3.7V (Batteries are not included in the product) Function OFF - Turn off. Fire (switch button) - Burning mode, press the left button 'Fire' to get burning resistance. Ohm Reader - Resistance measuring mode.

Manufacturer: HP Brand: HP

List of compatible models includes: DDS2 3.5" Int Tape Drive (OEM 1050)

Manufacturer: Amprobe Brand: Amprobe

Amprobe TIF300HV Tic Tracer - AC Voltage Detector

Manufacturer: Probe Master Brand: Probe Master Model: 4903-1K

Oscilloscope probe, 38MHz, 1X, 600V, 3.5ft, DELUXE KIT

Manufacturer: Rigol Brand: Rigol Model: M3TB24

Rigol M3TB24 24 channel MUX Terminal Box Terminal block for MC3324. Terminal block accessory for M300 DAQ system modules with model numbers ending in 24. Measurement Connections Using External Terminal Blocks  M300 provides 6 kinds of terminal blocks to easily connect the signal to be measured to the module. The models of the terminal blocks and corresponding modules are listed in the table below. This section introduces how to use the external block.   Terminal Block Module 1 M3TB32 MC3132, MC3232 2 M3TB64 MC3164, MC3264 3 M3TB24 MC3324 4 M3TB48 MC3648 5 M3TB16 MC3416 6 M3TB34 MC3534 Note: for the MC3724, the signal can be connected to the SMB connectors on the module directly. No terminal block is needed.  WARNING: Cut off all the power supplies before opening the terminal block or removing the terminal block from the module.  1. Place the terminal block with the front (with the RIGOL caption) facing downward and pull the two latches in the arrow direction in the figure below and press them down. Place the terminal block with the front facing upward and pull the upper cover of the terminal block upward and remove it. 2. Connect the cables for connecting the signal under test according to the labels on the circuit board of the terminal block (for the connecting method, refer to Table 1-1). Pass the binding wires through the two groups of holes as pointed out by the arrows in the figure below to fix the cable connected. Pay attention to the channel or terminal connected to the cable to ensure that the signal connected is correct. 3. Connect the terminal block to the module via interface 1 (the interface definition is in Figure 1-7) on the module and screw down the two screw rods onto the nuts on the module. 4

Manufacturer: Fluke Brand: Fluke Model: T+ Color: T+ Electrical Tester

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.

Manufacturer: BestAir PRO Brand: BestAir Model: SGMPR-2

BestAir Pro SGMPR-2 Merv 11 2 Pack.

Manufacturer: American Standard Brand: Honeywell Model: GIDDS-296123 Color: Multicolored

24V/60HZ, 3/4" SWEAT, SPST END SWITCH, 8.0CV, 125PSI STATIC - Manufacturer: Honeywell - Country of Manufacture: Canada - Manufacturer Part Number: V8043E1061.

Manufacturer: Probe Master Brand: Probe Master Model: 4903-2K

Oscilloscope probe, 30MHz, 1X, 600V, 5ft, DELUXE KIT

Manufacturer: Fluke Brand: Fluke Model: TL223 Color: Multicolored

This Fluke is the perfect test lead kit for todays electronics tests and designs. The kit includes precision electronic probes with multiple spring-loaded sharp tips to maximize contact with SMD test points. The kits also includes micro-grabbers and leads to enable fine SMD tests along with mini alligator clips, grabbers, and probes for virtually every electronics need. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.