Electrical Testing - Page 459

Manufacturer: Autonics Brand: Autonics USA, Inc

Timer, Analog, Star Delta, Multi-Range, SPST & SPST, 100-240VAC/24-240 VDC, 8-Pin (socket req'd)

Manufacturer: DIGITEN Brand: DIGITEN

This is our V2.0 version people counting system: HMPC-02, it is easy to install, you don't need to add extra wire to install.Come with 2-prong power cable for counter and one adapter for transmitter, so easy to connect this kit to wall outlet. The transmitter unit transmits infrared beam to the receiver unit. When someone passes between the 2 units and breaks the infrared beams, the count value increases by one. The counter will count total people times(include in and out) Features Count the people number how many peoples pass through this system. Range is 30cm-20m(1 ft to 65 fts),and range can be reduced to 30% in bad weather conditions:fog,rain,dust,dust,etc. Good stability, strong Anti-interference. Counting value be retained when power failure. Built-in button on the panel to RESET to zero Application: retail store,office,enter/exit of gate,etc. Specifications: Working voltage: 100-240VAC Counter working mode: switch LED dimension: 0.56 inch RED Display range:0-999999 2-Prong power lead: 1.5m(5 fts), US plug This power adapter (transformer) lead: 90cm(3 fts) Counter overall dimension: 57mm*40mm*85mm Counter panel cutout dimension:51mm*27mm 3 pin Cable length:60cm(2 fts) Transmitter and receiver dimension:49.2*76*21.6mm Packaging include 6 digits counter x 1(include wire) Infrared sensors(transmitter and receiver) x 1 2-Prong Power wire x 1 Power supply(2.1x5.5mm plug) x 1 Parts include Screws,M3 brass pillar,etc. Instruction x 1

Manufacturer: 3m Company Brand: 3M

UNDERCOATING RUBBR 18OZ

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-08517-65

The Oakton Penetration Probes offer a pointed tip style for penetration into hard and semisolid materials. Sturdy stainless steel tip casing prevents tip from bending when inserting. Probes include a 5-ft.. PVC coiled cord with strain relief that protects from repeated flexing and tugging. Ergonomic, easy-grip 5"L handle provides maximum heat insulation and impact resistance. Finger stops on handle prevent probe from rolling and fingers from sliding when inserting probe into hard materials. The 316 stainless steel sheath (shaft casing) provides durability, strength, and maximum abrasion resistance. Rugged thermoset plastic mini connector is compatible with all Digi-Sense and Acorn thermocouple thermometer. Connectors are color-coded based on thermocouple type: type J black, type K yellow, type T blue. Oakton #: WD-08517-65

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: DP 52

For TTL and CMOS. Produces 10mS pulse signals at 100mA. External square wave terminal. Sync input terminal. 0.5pps/400pps Pulse repetition Rate.

Manufacturer: POMONA Brand: Pomona

POMONA 4543-0 PIN TIP JACK, 1500V, 5A, BLACK

Manufacturer: Hioki Brand: Hioki Model: 3246-60

The Hioki 3246-60 pen-sized digital multimeter (also known as a multitester) is an average-sensing, auto-ranging meter for measuring voltage and resistance in electrical testing applications. The meter has integral test leads. A built-in flashlight illuminates dark work areas. The pen-sized meter fits in a shirt pocket when not in use. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The hold function keeps a reading on the LCD, even after the meter is disconnected. The LCD is backlit for readability in low light. The unit automatically turns off after 10 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's battery needs to be replaced. When not in use, the black test lead can be attached to the back of the meter and the red test lead can be covered with the built-in sensor cap to help protect against bumps and abrasions.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 4,200-count resolution, meaning it can display up to 4,199 units (3-1/2 digits) before the operating range needs to be changed. Without the included test lead sleeves, it meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 600V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners). With the included test lead sleeves, it is certified for Category III installations up to 600V, which covers items used with enclosed building circuit ...

Manufacturer: Hioki Brand: Hioki Model: 9021-01

Thermistor temperature probe for temperature measurement.

Manufacturer: Made in usa Brand: awasy2415

& DYNISCO AMPHENOL PT06A-10-6P (SR) 0008 (S74) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT2240-8 Color: Gray

The 4mm safety banana jack (socket) accepts sheathed or shrouded banana plugs and meets the latest international safety standard IEC 61010-031 to 1,000 V CAT III and 600 V CAT IV. Round panel nut allows for compact placement and assembly. Termination is with 0.080" (2mm) solder hole for wire attachment. Body made of polyamide (nylon); brass/nickel plated jack and nut. Body thread: M12 x 0.75mm. Maximum panel thickness: 0.40" (10mm). Use assembly wrench tool set. IEC rating: 1,000 V CAT III / 600 V CAT IV. Current max: 25 A. Resistance max: