Electrical Testing - Page 728

Manufacturer: TTi Brand: TTI Model: DMM1604-AIM-TTI INSTRUMENTS

TTi 1604 Digital Multimeter × TTi 1604 Digital Multimeter HIGHLIGHTS: ACCURACY 0.08%; RESOLUTION 10μV 10m and 0.1μA TRUE PMS AC FUNCTIONS   TTi 1604 Digital Multimeter     Model 1604 - 40,000 Count Bench Multimeter × Model 1604 - 40,000 count bench multimeter   A Value-For-Money DMM The 1604 is a low-cost auto/manual ranging bench-top DMM with a large and bright LED display. It offers 4¾ digit (40,000 count) scale length, true RMS ac measurements, a basic accuracy of 0.08% and a resolution of 10μV, 10m and 0.1μA.   A Substantial Bench-top instrument The 1604 is a robust mains-powered bench-top instrument. Unlike a hand-held multimeter it stays where you put it even with heavy test leads connected. The multi-position tilt stand ensures that the large display is always readable.   Smart Functions The 1604 incorporates several "smart" functions such as Relative measurement and Minimum-Maximum storage. The T-Hold function enables readings to be held on the display automatically each time a new test point is probed.   True RMS ac Ranges All AC measurements on the 1604 are True RMS. This avoids the errors on non-sinusoidal waveforms associated with other multimeters. Good ac bandwidth enables measurement within the audio band and ensures that higher frequency components of switching waveforms are included within the measurement result.   Frequency Measurement The 1604 has a frequency function which can be selected on any ac range in order to measure the frequency of the signal. Frequencies up to 40kHz can be measured and the maximum resolution is 0.1Hz.   Isolated RS-232 interface The 1604 is fitted with an isolated RS-232 interface. This permits remote control and data-logging to disk using optional Windows based software.

Manufacturer: TTi Brand: TTI Model: DMM1604-AIM-TTI INSTRUMENTS

TTi 1604 Digital Multimeter × TTi 1604 Digital Multimeter HIGHLIGHTS: ACCURACY 0.08%; RESOLUTION 10μV 10m and 0.1μA TRUE PMS AC FUNCTIONS   TTi 1604 Digital Multimeter     Model 1604 - 40,000 Count Bench Multimeter × Model 1604 - 40,000 count bench multimeter   A Value-For-Money DMM The 1604 is a low-cost auto/manual ranging bench-top DMM with a large and bright LED display. It offers 4¾ digit (40,000 count) scale length, true RMS ac measurements, a basic accuracy of 0.08% and a resolution of 10μV, 10m and 0.1μA.   A Substantial Bench-top instrument The 1604 is a robust mains-powered bench-top instrument. Unlike a hand-held multimeter it stays where you put it even with heavy test leads connected. The multi-position tilt stand ensures that the large display is always readable.   Smart Functions The 1604 incorporates several "smart" functions such as Relative measurement and Minimum-Maximum storage. The T-Hold function enables readings to be held on the display automatically each time a new test point is probed.   True RMS ac Ranges All AC measurements on the 1604 are True RMS. This avoids the errors on non-sinusoidal waveforms associated with other multimeters. Good ac bandwidth enables measurement within the audio band and ensures that higher frequency components of switching waveforms are included within the measurement result.   Frequency Measurement The 1604 has a frequency function which can be selected on any ac range in order to measure the frequency of the signal. Frequencies up to 40kHz can be measured and the maximum resolution is 0.1Hz.   Isolated RS-232 interface The 1604 is fitted with an isolated RS-232 interface. This permits remote control and data-logging to disk using optional Windows based software.

Manufacturer: Teledyne LeCroy Brand: Teledyne LeCroy

Test Probes 500MHz Passive Probe

Manufacturer: Teledyne LeCroy Brand: Teledyne LeCroy

Test Probes AttenuatorPlug On /IO

Manufacturer: UNI-T Brand: UTD2062CE

1、Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; 2、Storage of waveforms setups and interfaces waveforms and setups reproduction; 3、Automatic measurement of 28 waveform parameters; 4、Unique waveform recording and replay function; 5、Edge,Pluse,Video,Alternate trigger functions; 6、Unique Pass/Fail functions; 7、Multilingual menu displays. Specification:UTD2062CE Channels:2 Bandwidth:60MHz Sample Rate:1GS/s Rise Time:≤5.8ns Memory Depth:25kpts Waveform Acquisition Rate:≥2000wfms/s Vertical Sensitivity:2mV/div~5V/div Timebase Range:5ns/div~50s/div Storage:Setup, Wave, Bitmap Trigger Modes:Edge, Pluse, Video, Alternate Interface:USB Device, USB Host, Pass/Fail General Characteristic Power:100-240VAC, 45-440Hz Display:5.7 Inches 64K Color TFT LCD, 320×240 Product Color:White and Gray Product Net Weight:2.5 Kg Product Size(W×H×D):320mm ×150mm ×130mm Standard Accessories:Probe×2 (1×,10× switchable),Power Cord,USB Cable,PC Software CD

Manufacturer: Gems Sensors Brand: Warrick Model: 27A1D0

Series 27 is UL approved for use in Class I, Groups A, B, C, D; Class II, Groups E, F, G; and Class III hazardous locations. SPDT output contacts. UL Pilot Duty rated. CSA Certified for Class 1, Groups A, B, C and D; Class II, Groups E, F and G; Class III.

Manufacturer: Greenlee Brand: Greenlee

Greenlee 177 PRECISION TONE GENERATOR (177)

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3131A

The Kyoritsu analog megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 400MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance continuity and lights an indicator and sounds a buzzer when a live circuit is detected. When measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter is available in a model (B009TALC6S) that measures low-resistance continuity to 20Ω and has a backlight for visibility in low light, and in a model (B009TALDUI) that measures low-resistance continuity to 500Ω and detects AC voltage to 600V. The unit has a battery voltage check that indicates the condition of the batteries. It is rated for category (CAT) III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a set of test leads, a test lead storage pouch, two 500mA/600V fuses, a shoulder strap, six 1.5V AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistance measured400MΩTest voltages250V, 500V, 1,000VMaximum AC voltage measured600V (model B009TALDUI only)Installation ratingCAT III, 300VStandards metIEC safety standards 61010-1, 61010-2-031, and 61557-1/2/4; IP51; CE markingPower(6) 1.5V AA batteriesMegohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degrade...

Manufacturer: Siglent Brand: Siglent Model: SDG1000 Series

The SDG1000 series of high-performance function/arbitrary waveform generators use direct digital synthesis (DDS) technology and can generate accurate, stable, clean and low distortion output signals. It provides fast rising and falling edge square waves. The SDG1000 series provides a user-friendly graphical interface that can help you complete tasks faster and greatly improve your work efficiency. It has dual-channel output and each channel can output waveforms. Features 125 MSa/s sample rate, 14 bit vertical resolution, 16 Kpts memory Outputs 5 types of standard waveforms, 48 internally stored waveforms Includes built-in high precision, 200 MHz frequency counter Multiple modulation functions, sweep-frequency function, pulse train function Standard PC connections: USB Device, USB Host, support U Disk storage and software Can seamlessly connect to the SDS1000 series digital oscilloscopes and supports remote command control

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Fittings, 1/8in stainless steel, 20/Pk - 58