Electrical Testing - Page 794

Manufacturer: Fluke Networks Brand: Fluke Networks Model: PTNX8

POCKET TONER NX8-MAIN + TONER

Manufacturer: FLIR Systems Brand: Extech Model: BT100-TL

Replacement Kelvin Test Leads for Extech Model BT100 Battery Capacity Tester.

Manufacturer: Fluke Corporation Brand: Fluke Model: 847793

Digital multimeter replacement fuse. 600V Voltage. 15A Current.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT2392A-0 Color: Black

Fully insulated large alligator clip with 4mm banana jack. Jaw opens to 25mm. Works with both bench and handheld digital multimeters. Meets IEC 61010-031 safety standards. Black color. An alligator clip is a type of spring-loaded clip. Commonly used in making temporary electrical connections, alligator clips have serrated jaws. IEC rating: 1,000 V CAT III / 600 V CAT IV. Current max: 20 A. Resistance max: ≤20 mohm. Temperature: -20 to +80 degree C. RoHS compliant.

Manufacturer: Black & Decker Brand: BLACK+DECKER Model: EM100B

These days, every dollar counts. The Black & Decker Energy Saver Power Monitor can help lower your power bill by up to 20%. That's huge! This incredible money-saving device device consists of two parts: a hand held power monitor, and weatherproof power sensor. Simply mount the sensor directly to the home's power meter, then use the hand held monitor to take up-to-the-minute readings. It's easy to install and there's no wiring required. The monitor features a large LCD display with readings for minute by minute energy usage in dollars, month to month usage, estimated monthly bill, plus outdoor temperature. This allows you to monitor every bit of energy consumed, so that you can cut back where necessary, and see real results. The included instruction booklets explain the operations in detail, so the whole family can be involved. Know more, use less, and save money. Bring home your Black & Decker Energy Saver Power Monitor today! PLEASE NOTE THAT THIS DEVICE IS NOT COMPATIBLE WITH ALL METERS. PLEASE CLICK ON THE GRAPHIC DIAGRAM THUMBNAIL TO DETERMINE IF YOUR METER IS COMPATIBLE BEFORE PLACING YOUR ORDER. Go green and save money on energy costs with the Black & Decker EM100B Energy Saver Series Power Monitor. This compact, easy-to-install device lets you track the amount of electricity that your household uses--and the costs of that usage--in real time. This monitor can help you reduce your energy consumption and decrease your monthly bills while helping the environment. .caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul.indent {list-style: inside disc;text-indent: 20px;}table.callout {font-family: Verdana, Helvetica, Arial, serif;margin: 10px;width: 250;}td.callout3-c26 {height: 100 percent;background: url('https://images-na.ssl-images-amazon.com/images/G/01/th/content_26/Q1_2009/c26-callout3.png') repeat-y;border-left: 0px solid #999999;border-right: 1px solid #999999;padding: 10px;width: 250px;}ul.callout {list-style: inside disc;text-indent: -12...

Manufacturer: Hantek Brand: Hantek

AC/DC frequency range: Up to 20 kHz Effective Measurement Range: 20mA to 65A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you are able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement. Specification: DCA range 1 mV /10mA +/-(1.5%+/-5mA) 10mA ~ 20A 1mV/100mA +/-(2%+/-20mA) 100mA ~ 40A +/-(4%+/-0.3A) 40A ~ 65A ACA range 1mV/10mA +/-(2%+/-30mA) 100mA ~ 10A (40Hz ~ 2KHz) +/-(4%+/-30mA) 100mA ~ 10A (2KHz ~ 10KHz) +/-(6%+/-30mA) 100mA ~ 10A (10KHz ~ 20KHz) +/-(8%+/-30mA) 10A ~ 15A (40Hz ~ 20KHz) 1mV/100mA +/-(2%+/-30mA) 200mA ~ 40A (40Hz ~ 1KHz) +/-(4%+/-30mA) 200mA ~ 40A (1KHz ~ 2KHz) +/-(6%+/-30mA) 200mA ~ 40A (3KHz ~ 5KHz) +/-(8%+/-0.3A) 40A ~ 65A (40Hz ~ 20KHz) Captured Conductor Size 　 9mm maximum Low Battery Indictor 　 red LED lighting Operating Temperature 　 0Cto 50C 70% R.H. Storage Temperature 　 -20C to +70C, 80% R.H. Battery Type 　 9V DC, NEDA 1604, 6F22,0006P Battery Life 　 100 hours typical with alkaline Weight 　 250 gm typical Dimensions 　 195mm(H) x 70mm(W) x 33mm(D) Output 　 Supplied with coil cable with straight banana plug or BNC plug 　 Package includes: 1 x Hantek CC-650 AC/DC Current Clamp Digital Multimeter with BNC Connector

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-93601-04

The Oakton Penetration Probes offer a pointed tip style for penetration into hard and semisolid materials. Sturdy stainless steel tip casing prevents tip from bending when inserting. Probes include a 5-ft.. PVC coiled cord with strain relief that protects from repeated flexing and tugging. Ergonomic, easy-grip 5"L handle provides maximum heat insulation and impact resistance. Finger stops on handle prevent probe from rolling and fingers from sliding when inserting probe into hard materials. The 316 stainless steel sheath (shaft casing) provides durability, strength, and maximum abrasion resistance. Rugged thermoset plastic mini connector is compatible with all Digi-Sense and Acorn thermocouple thermometer. Specification: Type K; Temp range: -418 to 1500 °F (-250 to 816 °C); Junction: grounded; Time constant: 3 sec ; Response time: 15 sec; Dimensions: 4"L; Material: 316 SS sheath, glass-filled polypropylene handle These probes are designed for food, science, electronics, and HVAC applications. These probes are great for penetrating soft or semisoft materials. Oakton #: WD-93601-04

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9093/001

Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3647-8 Color: Gray

Sprung hook for the 3.5mm compact probes. Replacement sprung hook compatible with all tek 3.5 compact oscilloscope probes. Hook tip, gold plated. Reference Tektronix 013-0107-08. RoHS (2002/95/EC) compliant.

Manufacturer: Hantek Brand: Soodoo Model: PSO2020

- 1 channel - Bandwidth: 20MHz - Realtime sampling rate: 96MSa/s - Sampling Mode: Sample, Peak Detect, Average - Vertical resolution: 8 bits/channel - Vertical Sensitivity: 20mV~20V/div - Vertical Range: 8 divisions - Offset level: -/-4 divisions - Coupling Mode: AC/DC/GND - Offset increments: 0.02 div - Input Impedance:1M ohm - DC accuracy:+/-3% - Max Measured Voltage:50V (DC + AC peak) - Max. Input Voltage: 60V(DC + AC peak < 10kHz) - Display mode: Y-T - Timebase range: 1ns/div～5000s/div - Buffer Size: MAX.1M samples - Trigger Type: Edge trigger: Rising edge, Falling edge - Trigger Mode: Auto, Normal and Single - Trigger Range: 8 divisions - Trigger level: +/-4 divisions - Trigger Settability : 0.02 div increments - Auto Measurements: Vp-p, Vmax, Vmin, Vmean, Vrms, Vamp, Vtop, Vbase, Vmid,positive overshoot, negative overshoot, cycle mean, cycle RMS, period, frequency, positive pulse width, negative pulse width, rise time (10%~90%), fall time (10%~90%), positive duty cycle, negative duty cycle - FFT:Rectangular, Hanning, Hamming, Blackman Window - Interpolation: Linear, Sin(x)/x, Step - Button Operation: Start/Stop, Auto, Volt/div, Offset, Time/div, Position, Spotlight - Operating temperature: 0 to +40 °C - Operating humidity: 15 - 80 % RH - Storage temperature: -20 to 60 °C - Storage humidity: 15 - 85 %RH - Dimensions: approx. 230(L)x43(W)x 27(H)mm - Weight: approx.150g - Operating systems: Windows XP, Vista, 7, 8, 8.1