Motion, Speed & Force - Page 109

Manufacturer: Shimpo Brand: Shimpo Model: DT-311J-230V

The Shimpo DT-311J-230V heavy duty digital stroboscope has a xenon flash tube, a 200 to 1,500 flashes per minute (FPM) flash range, and is Ingress Protection 65 (IP65) rated for use in harsh conditions. It is designed for motion analysis, preventive maintenance, and speed measurement of repetitive motion in harsh or wet environments including textile, weaving, and printing industries. The stroboscope is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. The xenon flash tube provides crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Internal and external trigger modes have a 200 to 1,500 FPM range and an accuracy of + or - 1 digit. An alarm indicates an out-of-range speed below 200 or above 1,500rpm. External mode features include automatic synchronization, phase shift, tachometer mode (rpm), and divide ratio selection. Divide ratios of 1/1, 1/2, 1/3, 1/4, and 2/4 enable the operator to distinguish true RPM from harmonics. Phase shift has a range of 0 to 359 degrees in one-degree increments to enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The National Electrical Manufacturers Association (NEMA) 4X housing is IP65 rated against airborne particles, water, and corrosive agents. Shock-absorbing components provide protection in harsh environments. The stroboscope is 230V AC line powered and includes a 6m/19.68ft input and power cable with a connector, a rubber strobe guard with handle, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash range (internal and external)200 to 1,500 RPMAccuracy+ or - 1 digitInternal mode featuresFlash rate adjustmentExternal mo...

Manufacturer: Starrett Brand: Starrett Model: S7793Z

The Starrett S7793Z portable contact/noncontact tachometer measures rotational speed, linear speed, count, and has a timer, a laser beam for noncontact measurements, and an LCD screen. This contact/noncontact portable tachometer is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It can measure rotational speed, linear speed, count, and time for versatility. The tachometer provides contact measurements in in./min, ft./min, yd./min, m/min, or cm/min, and noncontact measurement in rpm for flexibility of use. Its optical sensor is a laser beam that works at a distance of up to 25 feet for user safety. The LCD screen presents test results and the unit of measurement, and it has on-target and low battery indicators. It stores the maximum, minimum, and last test result values for ease of data recall. It is autoranging, to display the most appropriate test result value automatically; or it can be set to display results with a fixed decimal value. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments.The Starrett S7793Z accommodates remote contact attachments and remote sensors (sold separately), and it has a TTL-compatible pulse output to trigger devices such as data collectors or stroboscopes. The non-slip rubber housing provides gripping ease during one-handed use, and it can be tripod-mounted and locked to take continuous measurements. The tachometer conforms to NIST standards for compliance with regulations. It comes with a remote contact assembly, two contact adapters, a surface speed wheel, reflective tape, two AA batteries, an NIST traceable certificate of calibration, and a case.SpecificationsNoncontact range5 to 200,000rpmContact range0.5 to 20,000rpmNoncontact accuracy+/-0.01%Contact accuracy+/-0.05%Resolution0.001 to 10rpmOperating distance2 inches to 25 feetDisplay5 digitsWorking temperature range5 to 40 degrees C (40 to 105 degrees F); 80% RH up to 31 degrees C (88 degrees F)Power...

Manufacturer: Mark-10 Brand: Mark-10

The Mark-10 M3IE Force and Torque Indicator, 220V European Plug is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test technology, all calibration and configuration data is saved within the sensors smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with the advanced 5i force / torque indicator. The 3i shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Manufacturer: Shimpo Brand: Shimpo Model: FGE-1X

The Shimpo FGE-X DART series digital force gauge with liquid crystal display (LCD) measures compression (push) and tensile (pull) forces in quality control and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The gauge comes with one hook, one chisel, one flat head, one notched head, and one cone head sensor attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The unit accepts metric-threaded attachments and comes with a thread adapter for use with attachments that have English thread. The unit's calibration function helps maintain accuracy of measurements. The gauge's body is constructed from die-cast aluminum, which resists wear. The unit automatically shuts off after 10 minutes of non-use to conserve battery life, and a low-battery indicator shows when batteries need to be charged. The gauge operates on one...

Manufacturer: CGoldenWall Brand: CGoldenWall

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Features 1. Muitiple displays in N/KG/LB, auto unit conversion; 2. RS232 Computer interface / Software for data download and analysis; 3. Setup the upper / lower limit freely. Indicator light / buzzer send out alarm; 4. Showing test direction ( Push or Pull ); 5. Backlight LCD display; 6. High precision & resolution, adjustable sampling speed from 15 up to 480Hz; 7. Holding and removing the peak value automatically (1 to10sec can be setup ); 8. In storage 800sets measuring data, and automatic calculate storage data average, max, min value. In storage data pagination browse and check; 9. AC power / Re-chargeable battery operation capable; 10. Defined period of auto power off without operation; 11. Port-in output ( baud rate 9600 ) can print 10 group storage testing data Max, Min, Average value and eligibility or disqualification judgement; 12. Handy use or fix on the test fixture ( option ) Specifications 1. Capacity: 2000N / 200Kg / 440lb; 2. Min unit: 1N / 0.1kg / 0.2lb; 3. Value error: 0.5%; 4. Units: N, Kgf, LBf; 5. Sampling speed: 15Hz to 480Hz; 6. Work temperature / Humidity: 0C to 40C, 15 to 80%; 7. Power Supply: 110 to 220V AC battery charger or battery operation (Nickel battery 6V/1500mAh ); 8. Work environment: No vibrancy and corrosion Note If you have any question,please contact us via email or massage We will try our best to serve for you. Please leave us a positive feedback if you are satisfied with our items and service

Manufacturer: Tereninstruments Brand: tereninstruments

Applications: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. Features: Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. Wide frequency range (10Hz~10kHz) in acceleration mode. Optional headphones for use as electronic stethoscope. Bearing condition monitoring function. Use ""USB data output"" and ""RS-232 data output"" to connect withPC. General Specifications: Sensor: Piezoelectric Transducer Measuring Parameters & Range: Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s; 0.0-40g Velocity: 0.01-400.0 mm/s True RMS; 0.004-16.00 inch/s Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil Frequency Range: Acceleration:10Hz ~ 10kHz Velocity:10Hz ~1kHz Displacement:10Hz ~ 1kHz Accuracy:+/- ( 5%n + 0.2 ) Metric / Imperial Conversion Analogue Output: AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) Max. Value Hold Power Off: Manual Power Off or Auto Power Off Battery Indicator:Low Battery Indicator Data Output:USB, RS-232 Operating Conditions: Temperature: 0~50 C; Humidity:

Manufacturer: Tereninstruments Brand: tereninstruments

Applications: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. Features: Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. Wide frequency range (10Hz~10kHz) in acceleration mode. Optional headphones for use as electronic stethoscope. Bearing condition monitoring function. Use ""USB data output"" and ""RS-232 data output"" to connect withPC. General Specifications: Sensor: Piezoelectric Transducer Measuring Parameters & Range: Acceleration: 0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s; 0.0-40g Velocity: 0.01-400.0 mm/s True RMS; 0.004-16.00 inch/s Displacement: 0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil Frequency Range: Acceleration:10Hz ~ 10kHz Velocity:10Hz ~1kHz Displacement:10Hz ~ 1kHz Accuracy:+/- ( 5%n + 0.2 ) Metric / Imperial Conversion Analogue Output: AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) Max. Value Hold Power Off: Manual Power Off or Auto Power Off Battery Indicator:Low Battery Indicator Data Output:USB, RS-232 Operating Conditions: Temperature: 0~50 C; Humidity:

Manufacturer: Tlegend Instrument Brand: Tlegend Instrument

Specifications and Parameters Maximum load:500N Effective stroke:150 mm Length × width × height:230×150×490 mm Effective area of the test area:105×100 mm Net weight: 9kg Structure Sketch show in picture Test Stand Only, the Force Gauge not included

Manufacturer: Shimpo Brand: Shimpo Model: FGE-0.5XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Manufacturer: Reed Brand: Reed Instruments Model: SD-6100

The REED Force Gauge Data Logger measures tension and compression and has a fast/slow AD selection. Force is measured in kg, lb or Newton's and the display is reversible so that its always legible regardless of direction. The meter has a real time data logger with integral 2GB SD memory card (OPTIONAL). Just plug the SD card into the computer and it downloads directly to EXCEL.