Motion, Speed & Force - Page 2

Manufacturer: Shimpo Brand: Shimpo Model: DT-ADP-200LR

Manufacturer: www.meter-depot.com Brand: MN Measurement Instruments Model: SM6234E

This is a professional digital Laser Tachometer for the measurement of RPM, total revolutions or rotation frequency in Hz. Simply aim the laser beam at a reflective mark placed on a rotating device, push the button and the RPM or Hertz reading is immediately displayed. No contact with the shaft or wheel is necessary to measure the rotational speed. The photo tachometer comes in a very sturdy storage box with foam insert. This Tachometer can be used to troubleshoot and tune gasoline and diesel engines, machines, electrical motors and belt drives. It has a wide range of industrial, manufacturing and factory applications and should not be missed in any work shop.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: NLB-200

Introduction: The NLB series Analog Force Gauge with compact size, high accuracy, they are easy to operate and handy to carry out, and can show the unit of newton and pound at the same time. The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load test. They are excellent products which can take the place of the old style force gauges, and widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for test of pull or push load test, insertion force or pull and destructive experiment. Please read the manual carefully before using this instrument. Size: Please see the attached picture Specifications: •Model:NLB-200 •Max load:200 N/44 lbs •Min load:20N/4 lbs •Resulution:1.0 N/0.4 lbs •Rod journey:10 mm •Work temperature:20° C ± 10° C •Carry temperature:-27° C ~70° C •Relative humidity:15%~80% RH •Work environment:No vibrancy and no cautery Accessory: •Push clamp:4 •Pull clamp:1 •Added pole:1 •User's manual:1 •Check certificate:1

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: NLB-200

Introduction: The NLB series Analog Force Gauge with compact size, high accuracy, they are easy to operate and handy to carry out, and can show the unit of newton and pound at the same time. The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load test. They are excellent products which can take the place of the old style force gauges, and widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for test of pull or push load test, insertion force or pull and destructive experiment. Please read the manual carefully before using this instrument. Size: Please see the attached picture Specifications: •Model:NLB-200 •Max load:200 N/44 lbs •Min load:20N/4 lbs •Resulution:1.0 N/0.4 lbs •Rod journey:10 mm •Work temperature:20° C ± 10° C •Carry temperature:-27° C ~70° C •Relative humidity:15%~80% RH •Work environment:No vibrancy and no cautery Accessory: •Push clamp:4 •Pull clamp:1 •Added pole:1 •User's manual:1 •Check certificate:1

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-046

Rechargeable NiMH Battery Pack for BBX, DBX, PBX model strobes.

Manufacturer: Reed Brand: REED Instruments Model: R7100

The Reed  R7100 portable contact/noncontact tachometer measures up to 99,999rpm, has a laser beam for noncontact measurements, and a five-digit LCD screen. This contact/noncontact portable tachometer is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed from 10 to 99,999rpm for noncontact measurements, and from 0.5 to 19,999rpm for contact measurements, with + or - 0.05% accuracy. It is autoranging, to display the most appropriate test result value automatically. It measures surface speed from 0.5 to 1,999.9m/min. Its optical sensor is a laser beam that works at a distance from 50 to 500mm for user safety. The LCD screen presents test results and the unit of measurement, and it stores the maximum, minimum, and last test result values for ease of data recall. It comes with a cone contact adapter, a funnel contact adapter, a surface speed wheel, four AA batteries, reflective tape, instructions, and a carrying case. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments. Specifications Noncontact range 10 to 99,999rpm Contact range 0.5 to 19,999rpm Surface speed range 0.5 to 1,999.9mpm Accuracy +/-0.05% Resolution 0.1rpm Operating distance 50 to 500mm Power (4) AA batteries Dimensions 210 × 74 × 37mm/6.3 x 2.8 x 1.5 inches (H x W x D) Weight 7.9 oz. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for me...

Manufacturer: Extech Instruments Brand: Extech Model: 461750

These pocket-sized tachometers are small enough to fit anywhere. Read measurements easily with large LCD. HOLD function freezes readings displayed on the LCD. Select from an optical or contact tachometer. Model 87702-10 ia a contact meter that measures rpm and linear speeds in ft/min, m/min, and yd/min. Concave and convex tips allows for linear speed measurements. What's Included: one 9 V battery. Model 87702-10 also includes convex and concave tips and a surface wheel. Compact tachometers fit in your pocket Ergonomic design features protective finger guard

Manufacturer: Loos & Co Brand: Loos & Co. Model: 53845

The Loos Cableware metric tension gauge measures the tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: Extech Brand: Extech Model: 461950

' Panel Tachometer, Accuracy +/-0.05 Percent, Power Requirement 110/220 VAC, 5 to 99, 990 RPM, 4 Digit LED Display, Fits 3.61 In. x 1.66 In. x 3.54 In., 12V Input, Resolution 0.1 RPM, Includes Instructions, Manufacturers Warranty Length 1 Year '

Manufacturer: Loos & Co Brand: Loos & Co. Model: 53846

The Loos Cableware metric tension gauge measures the tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) standard 9001.