Motion, Speed & Force - Page 6

Manufacturer: Shimpo Brand: Shimpo Model: DT-311A

While the DT-311A stroboscope is extremely easy to operate via its lightweight and compact design, its rugged metal construction provides unequaled reliability in the harshest environments. One year warranty. Highly accurate +/- 0.01 percent of reading is ideal for QC inspection and process control. Phase shift (in degrees of delay time) enables visual analysis of rotating reciprocating objects through all points of motion/time/angle. High flash rate up to 35,000 FPM fits most industrial specialty applications. Microprocessor-controlled assures top performance in volatile temperature environments. External trigger automatically synchronizes unit with equipment. Synchronous output permits unit to power other strobes. Flash timer control maximizes flash tube life. Continuous duty cycle eliminates downtime waiting for unit to cool. Highly polished focused reflector prevents "blind" viewing areas. Manual flash controller knob allows quick/accurate flash rate adjustments.

Manufacturer: Mark-10 Brand: Mark-10 Model: ES10

The ES10 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose a lever (ES10) for quick-action testing.

Manufacturer: Tohnichi Brand: Tohnichi Model: ATG2.4Z-S

Analog handheld torque gauge for measuring and tightening in low torque ranges Additional models available in equivalent range with different units of measure: ATG1.5CN-S Model cNm units (SI) 150ATG-S Model gf.cm units (Metric)

Manufacturer: Shimpo Brand: Shimpo Model: FGE-100XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Manufacturer: Extech Instruments Brand: Extech Model: 475040-NIST

Digital Force Gauge that provides Push/Pull measurements in kg, lbs., oz. and Newton units with 0.4% accuracy. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: Mark-10 Brand: Mark-10 Model: MG100

Series MG digital force gauges offer an economical solution for push and pull testing of up to 500 lbF. Rugged aluminum construction allows Series MG gauges to be hand-held or mounted to a test stand. Three push-buttons allow the operator to easily select units of measurement, reset zero, and recall peak loads. Compact design makes the MG portable and flexible for a wide range of applications.

Manufacturer: Shimpo Brand: Shimpo Model: FGE-50X

The Shimpo FGE-X DART series digital force gauge with liquid crystal display (LCD) measures compression (push) and tensile (pull) forces in quality control and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The gauge comes with one hook, one chisel, one flat head, one notched head, and one cone head sensor attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The unit accepts metric-threaded attachments and comes with a thread adapter for use with attachments that have English thread. The unit's calibration function helps maintain accuracy of measurements. The gauge's body is constructed from die-cast aluminum, which resists wear. The unit automatically shuts off after 10 minutes of non-use to conserve battery life, and a low-battery indicator shows when batteries need to be charged. The gauge operates on one...

Manufacturer: Shimpo Brand: Shimpo Model: FGE-100X

The Shimpo FGE-X DART series digital force gauge with liquid crystal display (LCD) measures compression (push) and tensile (pull) forces in quality control and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The gauge comes with one hook, one chisel, one flat head, one notched head, and one cone head sensor attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The unit accepts metric-threaded attachments and comes with a thread adapter for use with attachments that have English thread. The unit's calibration function helps maintain accuracy of measurements. The gauge's body is constructed from die-cast aluminum, which resists wear. The unit automatically shuts off after 10 minutes of non-use to conserve battery life, and a low-battery indicator shows when batteries need to be charged. The gauge operates on one...

Manufacturer: Shimpo Brand: Shimpo Model: DT-725

The Shimpo DT-725 battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes and a continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a 40.0 to 12,500 flashes per minute (FPM) range and an accuracy of + or - 0.02% of reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The 5-digit, 8mm tall LED display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread and continuous duty cycle provide permanent installation and long-term use without the need for cool-down periods. The high-impact plastic housing provides durability. The stroboscope includes a 115V AC adapter and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash range and accuracy40.0 to 12,500 FPM, with + or - 0.02% of reading accuracyResolution0.1 FPM at 40.0 to 4,999.9 FPM 0.2 FPM at 5,000 to 7,999.9 FPM0.5 FPM at 8,000 to 9,999.5 FPM1 FPM at 10,000 to 12,000 FPMRate multiplier/dividerMultiply-by-2 and divide-by-2Phase shiftPush buttons shift 360 degrees in 6 secondsLight source10W xenon flash tube with 100-million flash life spanFlash duratio...

Manufacturer: Mark-10 Brand: Mark-10 Model: MG20

Series MG digital force gauges offer an economical solution for push and pull testing of up to 500 lbF. Rugged aluminum construction allows Series MG gauges to be hand-held or mounted to a test stand. Three push-buttons allow the operator to easily select units of measurement, reset zero, and recall peak loads. Compact design makes the MG portable and flexible for a wide range of applications.