Motion, Speed & Force - Page 4

Manufacturer: Extech Instruments Brand: Extech Model: 461895

Extech 461895 Combination Contact/Photo Tachometer; Large 0.4" (5 digit) LCD display; Uses visible light to read up to 6" (150mm) from target; Memory/readings button holds last reading for 5 min and recalls min/max readings 461895 Combines both contact (0. 5 to 19,999 RPM) and non-contact (5 to 99,999 RPM) models for use in virtually all tachometer applications. Uses visible light for non-contact measurements up to 6 in. (150 mm) from target. Comes with wheels for linear surface speed (0.2 to 6560 ft. /minute; 0.05 to 1999.9 m/minute) or RPM measurements, 4 AA batteries, 23 in. (0.6 m) reflective tape, carrying case, and user manual Key Features Unique display where characters reverse direction depending on measurement mode you are in Large 0.4" (5 digit) LCD display Uses visible light to read up to 6" (150mm) from target Memory/readings button holds last reading for 5 min and recalls min/max readings Microprocessor based with quartz crystal oscillator to maintain high accuracy Tachometer memory stores last, max and min readings Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements Accurate to 0.05% with max resolution of 0.1rpm in either photo or contact mode Complete with tips and wheel for rpm or linear surface speed, four 1.5V AA batteries, reflective tape and carrying case Specifications Resolution: 0.1rpm (< 1,000 rpm)/1rpm (>1000rpm) Power: 4 AA batteries Dimensions: 8.5x2.6x1.5" (215 x 65 x 38 mm) Weight: 10.6 oz (300 g)

Manufacturer: Loos & Co Brand: Loos & Co.

The Loos Cableware metric tension gauge measures the tension in cables and rods to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) stand...

Manufacturer: Shimpo Brand: Shimpo Model: DT-207LR-S12

The Shimpo DT-207LR-S12 portable contact/noncontact tachometer has a 12-inch wheel, measures rotational speed, linear speed, and total length, and has a laser beam for noncontact measurements. This portable contact/noncontact tachometer has a 12-inch wheel and is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed, linear speed, and total length for flexibility of use. Its optical sensor is a laser beam that works at a distance from 1 inch to 20 feet for user safety. The five-digit LED screen presents test results and the unit of measurement. It stores up to 13 readings, including the maximum, minimum, and last test result values for ease of data recall. A die-cast aluminum body provides durability in harsh environments, and the device can be tripod-mounted and locked to take continuous measurements. The tachometer conforms to NIST standards for compliance with regulations, and the CE mark indicates compliance with applicable EU directives. It comes with a 12-inch wheel, a contact adapter, two cone adapters, a funnel adapter, a 3.5-inch extension shaft, a carrying case, reflective tape, and an NIST certificate. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments.SpecificationsRange6 to 99,999rpmAccuracy+/-1rpm: 6 to 8,300rpm; +/-2rpm: 8,300 to 25,000rpm; +/-0.006% of reading +/-1 digit (+/-6 rpm max.): 25,000 to 99,999rpmMeasuring unitsRPM, meters/min., yards/min., ft./min., in./min.; Length: yards, meters, feet, and inchesOperating distance1 inch to 20 feetUpdate time1 secondOperating temperature32 to 113 degrees F (0 to 45 degrees C)Power(2) AA batteriesDimensions6.6 x 2.4 x 1.8 inches/167.5 x 60 x 46mm (H x W x D)Weight0.8 lb./365gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Tachometers measure the rate of rotation or surfa...

Manufacturer: Checkline Brand: Checkline Model: CDT-2000HD

The CHECK-LINE CDT-2000HD Combination Portable Tachometer combines the best features of both contact and non-contact models to accurately measure RPM, surface speed and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The CDT-2000HD can be up to 24 inches away from the small piece of reflective tape that is affixed to the rotating element. In the contact operating mode, the speed is sensed by directly contacting rotating device using one of the contact adapters supplied with the instrument. The CDT-2000HD's rugged construction, portability and outstanding features make It an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications. Complete Kit includes: The CDT-2000HD includes the Tachometer, Slide-In Contact Adapter, 6" & .1m Surface Speed Wheels, Cone Tip, Funnel Tip, Extension Shaft, Reflective Tape, Two (2) AA Batteries (1.5 V), Calibration Certificate and Operating Instruction Manual -- all supplied in a foam-fitted, hard-plastic Carrying Case.

Manufacturer: Nextech Global Company Limited Brand: Nextech Model: DFS500

DFS-Series digital force gauges are cost-effective tension and compression testing tools. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 11 to 2200 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.

Manufacturer: Extech Instruments Brand: Extech Model: 461995

The Extech Combination contact/Photo Tachometer combines both contact and noncontact models for use in all applications. Includes four 1.5V AA batteries, 23in. reflective tape, wheels for linear surface speed or RPM measurement and carry case. Measures 5 to 99,999 RPM in nonconact mode up to 6.5ft./2 meters from target and 0.5 to 19,999 RPM in contact mode Reads linear surface speeds of ft./min. 0.2-6560 and M/Min. 0.05-1999.9 Characters on display reverse direction depending on contact or photo mode Memory/readings button holds last reading for 5 minutes and recalls min/max readings Includes four 1.5V AA batteries, 23in. reflective tape, wheels for linear surface speed or RPM measurement and carry case Model 461995

Manufacturer: Checkline Brand: Checkline

The new Check-Line DTL-100i Digital Torque Wrench is designed for precise measurement and application of torque in industrial, automotive, aerospace and many other applications. Its small size and ratcheting head are ideal for use in areas with limited access. It measures and applies torque in both CW and CCW directions and displays in Real-Time or Peak Mode. Measurement units are user selectable (Lb-in, N-m, ft-lb or Kg-cm). The DTL-100i features a programmable target set point that indicates the desired torque value with a red and green LEDs and audible beep.

Manufacturer: Jonard Industries Brand: Jonard Tools Model: GD-400

The Jonard large force gauge with round tip measures compression (push) force in quality control, process control, testing, and calibration applications. This analog dial gauge shows the present force measured in grams (g). A pointer on the dial shows the maximum (peak) force measured over the course of a test. It has a tolerance of + or - 0.01 (reading + maximum scale reading). The gauge's arm moves in either a clockwise or counterclockwise direction and can take readings in either direction. The round tip has measuring springs made from hard-tempered beryllium copper, for wear resistance, and can measure higher forces than a flat tip. The gauge's dial measures 2.5" in diameter.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Jonard Industries manufactures hand tools for telecom, fiber optics, and electronic industries. The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances (RoHS) directives in the manufacturing of all of its products.

Manufacturer: Jonard Industries Brand: Jonard Tools Model: GD-100

The Jonard large force gauge with round tip measures compression (push) force in quality control, process control, testing, and calibration applications. This analog dial gauge shows the present force measured in grams (g). A pointer on the dial shows the maximum (peak) force measured over the course of a test. It has a tolerance of + or - 0.01 (reading + maximum scale reading). The gauge's arm moves in either a clockwise or counterclockwise direction and can take readings in either direction. The round tip has measuring springs made from hard-tempered beryllium copper, for wear resistance, and can measure higher forces than a flat tip. The gauge's dial measures 2.5" in diameter.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Jonard Industries manufactures hand tools for telecom, fiber optics, and electronic industries. The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances (RoHS) directives in the manufacturing of all of its products.

Manufacturer: Mark-10 Brand: Mark-10 Model: G1058

This unique grip is designed to effectively secure samples for torque and pull tests. Typical applications include bottle cap torque testing, lid pull-off testing, and other tests. A matrix of threaded holes allows the serrated steel posts to be placed in positions specific to the test sample, with a broad diameter range of 0.2 - 3.5 in (5.1 - 89.0 mm). For torque applications, this grip can be used either manually with an STJ torque sensor or MGT torque gauge, or in test stand controlled applications. A typical torque test stand-based application will also typically require our G1023 bottle grip. For force applications, the grip can be mounted to a force gauge or test stand.