Motion, Speed & Force - Page 93

Manufacturer: AWS Brand: AWS

The AWS RDFA-150 150 Lb-ft Rundown Fixture 1/2 inch Drive is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Manufacturer: Testo AG Brand: Testo Model: 0563 0470

The Testo 0563 0470 portable contact/noncontact tachometer measures rotational speed, linear speed, and length, has a red visible-spectrum light beam, and a five-digit LCD screen. This contact/noncontact portable tachometer is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed, linear speed, and length for versatility. Its optical sensor is a red visible-spectrum light beam that works at a distance of up to 600mm for user safety. The five-digit LCD screen presents test results and the unit of measurement, and it can store the maximum, minimum, and average test result values for ease of data recall. It automatically shuts off after 30 seconds of inactivity to help preserve battery life. The durable body helps protect the tachometer from impact. The CE mark indicates compliance with applicable EU directives. It comes with a contact adapter, a cone adapter, a surface speed wheel, reflective tape, two AA batteries, and a case. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments.SpecificationsNoncontact range1 to 99,999rpmContact range1 to 19,999rpmAccuracy+/-0.02%Resolution0.01rpm for 1 to 99.99rpm; 0.1rpm for 100 to 999.9rpm; 1rpm for 1,000 to 99,999rpmNoncontact operating distanceup to 600mmContact measurementsRPM; linear speed: m/min., ft./min., in./min.; length: meters, feet, inchesDisplay5 digitsOperating temperature0 to 50 degrees C/32 to 122 degrees FPower(2) AA batteriesDimensions175 x 60 x 28mm (H x W x D)Weight190gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachom...

Manufacturer: Extech Instruments Brand: Extech Model: 461891-NIST

Manufacturer: ARCO Brand: SMART SENSOR Model: AR63A Color: off-white

FEATURES Vibration meter(also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration. It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc. SPECIFICATIONS Measuring Principle :Piezoelectric Ceramic Accelerometer(shear-type) Acceleration Range: 0.1~199.9m/s2 Velocity Range :0.1~199.9m/s  Displacement Range: 0.001~1.999mm Acceleration Frequency Range: 10Hz~1KHz (LO),1KHz~15KHz (HI) Velocity Frequency Range : 10Hz~1KHz Displacement Frequency Range: 10Hz~1KHz Accuracy : ±5%H ±2 digits Signal Output AC output :2V peak ( Display full scale ) Max Hold Function --- Temperature Measurement --- ?/? Selection ---   PACKING INFORMATION Power :9V  Battery  Product Net Weight: 147g Product Size :183*67*30mm  Packing Style :Aluminum Box Standard Quantity Per Carton: 12PCS  Standard Carton Size: 45*32.5*52cm  Standard Carton Gross Weight: 11.93kg PACKAGE INCLUDED GaugeManual hand boxPaper boxBatteryWarranty card

Manufacturer: NIDEC SHIMPO Brand: NIDEC SHIMPO

NIDEC SHIMPO DT-105A TACHOMETER, 0.10 TO 25,000RPM, ±0.006%

Manufacturer: Ametek Gemco Brand: Ametek Gemco

Ametek Gemco Remote Tachometer Assembly for a 1999 Semelex(3LBS)      H  4.00"    L  4.00"   W  3.00"

Manufacturer: Mark-10 Brand: Mark-10

Adjustable Gripping Jaws for TT01 Cap Torque Tester, Pair Optional CT003 adjustable jaws include 4 rubber-edged gripping arms per jaw. Arms may be independently repositioned in 45 increments to accommodate unique samples.

Manufacturer: Imada Brand: Imada

The GR-30 Cam Grip, 30mm width, 110lb capacity ( Imada Force Gauge Attachments ) is a Self tightening, heavy duty grip. Cam structure allows to easily grip materials such as rubber, films etc. up to 4mm thickness.

Manufacturer: Checkline Brand: Checkline Model: TA-75

Torque tools which are in regular use need periodic checks to insure their accuracy. The TA-Series bench mounted torque analyzers are built for this purpose. These analyzers provide a means of quick and economical standardization. For use with hand operated tools only. Not for use with pneumatic or electric powered tools.

Manufacturer: Omron Automation and Safety Brand: Omron Automation and Safety

Counters & Tachometers ScrwTerm SPDTout 12VDC PS 6dig