Pressure & Vacuum - Page 239

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG25ATC15P18

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.

Manufacturer: MOORE Brand: Moore

NEW MOORE PIT/3-27PSIG/4-20MA/12-42DC-FA7 CURRENT PRESSURE TRANSMITTER D554792

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 109-RE-00-OO

Mid-West Instrument bourdon tube type differential pressure gauge. Model 109 System pressure is applied to the inside of a slightly flattened arc- shaped tube. As pressure increases, the tube tends to restore to its original round cross-section. This change in cross-section causes the tube to straighten. Since the tube is permanently fastened at one end, the tip of the tube traces a curve that is the result of the change in angular position with respect to the center. Powered by a test quality Bourdon Tube assembly, the assembly is encapsulated in a high pressure chamber that is fitted with a pressure connection to the inside of the Bourdon Tube and a second connection to the pressure chamber. Model 109 assembly incorporates a bi-directional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections (stainless steel), 6-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-1 percent full scale (ascending). Shatter resistant acrylic lens.

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 67002 Color: Multicolored

Yellow Jacket.

Manufacturer: ROSEMOUNT Brand: Rosemount

NEW ROSEMOUNT 3051CG4F22A1ADF FOUNDATION 0-300PSI PRESSURE TRANSMITTER D555521

Manufacturer: PRM Brand: PRM

PRM 0-200 PSI PRESSURE TRANSMITTER WITH IP68 ENCLOSURE 24VDC 4~20mA OUTPUT ACCURACY: +/- 0.3% FULL SCALE TEMPERATURE RANGE: -40-185 DEGREES F CONNECTION: 1/2 INCH MNPT / 316 SS

Manufacturer: General Wire Brand: General Wire Model: SV-A-WC Color: NA

This Super-Vee unit comes complete in a Professional Grade Carrying Case with two Flexicore Cables, designed to clear clogged drains from 1 1/4" through 3" in diameter. The unique Dyna-Thrust bearing system is one of the features built into this unit that will allow it to last a decade or more. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course the cables are Flexicore-with an integral wire rope center. Nobody makes cables like General.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 T

The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1200-000-RT

Cf12 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Bac-Flo Unlimited, Inc. Brand: Bac-Flo Unlimited, Inc. Model: Bac-Flo-3

Test procedures by USC, industry best 5-year warranty and calibration certificate valid for one full year from purchase date. Gauge is made of thermoplastic for long-term durability.