Pressure & Vacuum - Page 313

Manufacturer: Kodiak Controls Inc. Brand: Kodiak Controls Model: KC25-60"H2O

Pressure Gauge 60"WC, incorporates Capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection

Manufacturer: Generic Brand: Generic

Description 100psi fuel injection pump pressure gauge tester tuner gasoline test tools kit,it includes 9 pcs parts. Specification Meter diameter：7cm Measuring range:0-100psi,0-7bar Weight：1.1kg Size：35x25x6cm Package Included 1 x Pressure gauge 1 x Brass fitting 1 x Aluminum with Brass fitting 1 x Rubber hose 1 x Rubber hose 1 x Short flex hose 1 x Medium flex hose 1 x Long flex hose 2 x Hose clamps with hand carrying case

Manufacturer: CME Tools Brand: CME Tools

12 pcs precision angle block set 1/4,1/2,1 to 5 & 5 to 30 degree12 pcs angle blocks set accurate angles quickly. Made of high quality hardened steel. Precision ground. 1/4" thickness, 3" length. HARDNESS: HRC56 TO 60 1/4 degree, 1/2 degree,1 degree increments to 5 degree, 5 degree increments to 30 degree. Accuracy +/-0.0001". Any conveivable angles to these increments can be established. Lightly magnetized for better holding. Fitted in deluxe wooden box.

Manufacturer: Fluke Corporation Brand: Fluke Model: LVD2/CT Color: LVD2/CT Volt Light, 90-600V

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source. Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual Levels of Detection. Blue indicates proximity to AC Voltage source. Red indicates you're at the source. Operating temperature 0 to 50 degree C. Ultra-Bright White LED. 100000 hr bulb. AAA battery included.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 14E11B10FC

This Parker 14E11B10FC compact filter/pressure regulator combination or "piggy-back" is part of the Prep-Air II series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 5 micron, and the regulator is a non-relieving type to protect from venting potentially harmful gases. It has a polycarbonate bowl for resistance to oil, gas, and impact and a twist drain. This element/regulator has an operating pressure range of 1 to 30 pounds per square inch gauge (psig) and a high-flow 1/4" National Pipe Thread (NPT) port for a flow rate of 18 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Kodiak Controls Inc. Brand: Kodiak Controls Model: KC25-30"H2O

Pressure Gauge 30"WC, incorporates Capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FRG32J36P

This Square D Pumptrol 9013FRG32J36P electromechanical pressure switch with 10-5 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1 hp or less pump. The reverse-acting adjustable differential range is 6-20 psi and the cut-out range is 4-25 psi. This switch includes a copper pulsation plug. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: CME Brand: CME Tools

5pcs/set precision squares including 6", 8", 9", 10", 12" Each one is packed in carton case by itself. HRC 55-62 hardness.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG59J59G4M1X

This Square D Pumptrol 9013FHG59J59G4M1X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 175 psi. The switch has a 1/4" NPT external fluid connection and is suitable for use with a higher-horsepower motor with 2 hp or greater. The non-adjustable differential is 40 psi, and the adjustable cut-out range is 100-200 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a second ground screw and a 2-way pressure release valve. The maintained manual cut-out lever has auto and off positions. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Winters Brand: Winters Model: PFQ1247R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...