Pressure & Vacuum - Page 336

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 109-QE-00-OO

Mid-West Instrument bourdon tube type differential pressure gauge. Model 109 System pressure is applied to the inside of a slightly flattened arc- shaped tube. As pressure increases, the tube tends to restore to its original round cross-section. This change in cross-section causes the tube to straighten. Since the tube is permanently fastened at one end, the tip of the tube traces a curve that is the result of the change in angular position with respect to the center. Powered by a test quality Bourdon Tube assembly, the assembly is encapsulated in a high pressure chamber that is fitted with a pressure connection to the inside of the Bourdon Tube and a second connection to the pressure chamber. Model 109 assembly incorporates a bi-directional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections (stainless steel), 6-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-1 percent full scale (ascending). Shatter resistant acrylic lens.

Manufacturer: Winters Brand: Winters Model: P3S6180

The Winters P3S 300 series pressure gauge with stainless steel wetted parts has a circular dual scale dial that is enclosed in an aluminum case and a lower mount male connection with NPT rate, and measures pressure with a display accuracy of + or - 0.5%. The stainless steel wetted parts provide corrosion resistance. The circular dial is white aluminum, 4.5" (115 mm) or 6" (150 mm) in diameter, and enclosed in an aluminum case that is painted black and Ingress Protection certified IP52 for protection against dust and liquids. The front flange is polished stainless steel. The dial has an aluminum anodized black pointer that is micrometer-adjustable for ease of calibration, and the lens is glass for clarity. The gauge measures pressure with a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and has either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. The ring for the gauge is polished stainless steel. The bourdon tube is stainless steel 316L. The welding is stainless steel 316L tungsten inert gas (TIG) for strength. The over-pressure limit is 30% for pressures up to 600 psi (4,137 kPa), 25% for pressures from 600 to 1,400 psi (4,137 to 9,653 kPa), and 15% for pressures over 1,400 psi (9,653 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for boiler and control room applications with air, steam, oil, and fresh waterPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Mo...

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Adapter Turbo Special Gauge

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MP-040

Differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching set points. The Mini-Photohelic switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 300-300-1-1-2-8

Compact OEM Pressure Transducers. Ruggedness and long term stability during operation were the focus in the design of this NOSHOK 300 series pressure transducer. As a result of this we were able to develop a transducer for use in general industrial applications with technical specifications exceeding those of transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61 326 which make it ideal for areas where RFI, EMI or ESD signals are present. The compact size makes it very attractive for applications where space is limited. Constructed of high quality stainless steel makes it compatible with chemically aggressive media. The sensor is welded directly to the process connection eliminating the need for any gaskets or seals while also increasing the resistance to mechanical stress. Applicable for hydraulic and pneumatic systems, pumps and compressors, stamping and forming presses, test equipment and systems, industrial machinery and machine tools. RoHS compliant. Electricity connection: Hirschmann (DIN EN 175301-803 Form A). 4 mA to 20 mA, 2-wire Output Signal. Process Connection: 1/4" NPT Male. 2 times Full Scale Proof Pressure. 6 times Full Scale Burst Pressure. +/-0.5 percent full scale (BFSL) Accuracy; (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors). Repeatability: less than or equal to +/-0.05 percent Full Scale. Hysteresis: less than or equal to +/-0.1 percent Full Scale. Stability: less than or equal to +/-0.2 percent Full Scale per year, non-accumulating. Response time: less than or equal to 4 ms (between 10 percent and 90 percent Full Scale). Power supply 10 Vdc to 30 Vdc, unregulated. 316 stainless steel Housing material.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616WL-12-LCD

The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below. Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.

Manufacturer: CME Brand: CME Tools

* 5pcs 1/2 x 3x 6 X-Long Length degree carbide end mills 4flt, 3" flute length, 6" overall length s/e , center-cutting * 10% cobalt, micro-grain. New

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 300-15-1-1-2-8

Compact OEM Pressure Transducers. Ruggedness and long term stability during operation were the focus in the design of this NOSHOK 300 series pressure transducer. As a result of this we were able to develop a transducer for use in general industrial applications with technical specifications exceeding those of transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61 326 which make it ideal for areas where RFI, EMI or ESD signals are present. The compact size makes it very attractive for applications where space is limited. Constructed of high quality stainless steel makes it compatible with chemically aggressive media. The sensor is welded directly to the process connection eliminating the need for any gaskets or seals while also increasing the resistance to mechanical stress. Applicable for hydraulic and pneumatic systems, pumps and compressors, stamping and forming presses, test equipment and systems, industrial machinery and machine tools. RoHS compliant. Electricity connection: Hirschmann (DIN EN 175301-803 Form A). 4 mA to 20 mA, 2-wire Output Signal. Process Connection: 1/4" NPT Male. 2 times Full Scale Proof Pressure. 6 times Full Scale Burst Pressure. +/-0.5 percent full scale (BFSL) Accuracy; (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors). Repeatability: less than or equal to +/-0.05 percent Full Scale. Hysteresis: less than or equal to +/-0.1 percent Full Scale. Stability: less than or equal to +/-0.2 percent Full Scale per year, non-accumulating. Response time: less than or equal to 4 ms (between 10 percent and 90 percent Full Scale). Power supply 10 Vdc to 30 Vdc, unregulated. 316 stainless steel Housing material.

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 500 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections DIN 43650-A Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 1000 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 30 Hg Vac to 30 psi Accuracy +/-0.5% Full Scale Output 1 to 5VDC Power Required 9 to 36VDC Process Connection 1/8 NPT Male Electrical Connections Shielded Cable Lead Length (In.) 36 Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Max. Pressure (PSI) 60 Thermal Error +/-3% ( -4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_