Pressure & Vacuum - Page 360

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-5-000-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors Dip,Dual Radial Barb 10mBar Differ,3.3V

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A3202

Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar). Photohelic Sensing - How It Works in typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation. Relay-Transformer Features. A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A3000-100CM

Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: SanitGrasp Brand: SanitGrasp Color: Stainless Steel, Brushed Finish

The SanitGrasp SG-101 Hygienic Door Handle allows your patrons to open restroom doors without actually touching them! The US & internationally patented design makes it easy for any user to slip their arm into the opening and pull. Their hand never comes into contact with the door handle, and so never touches any germs that may be residing on that handle.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 451259SD04L60#

The Type 1259 process gauge is offered with an as-welded Bourdon tube to ensure safety and a longer life than competitive gauges. Meeting ASME B40.1, the Type 1259 process gauge has been engineered to meet marketplace requirements. Wetted part material printed on dial. 1 year warranty.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-1107

The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Manufacturer: Toro Brand: Toro

You'll never be missing a hose or adapter when you rely on this self-contained unit. Its long-lasting copper fitting is designed to fit any standard hose bib. Water flow and water pressure are both controlled by the 3/4 inch brass gate valve.

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-1533-CERT

Duro Pressure Gauge is NIST Certified with 3 point certificate of calibration for ISO and test applications with 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5" dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2" NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel.