Pressure & Vacuum - Page 362

Manufacturer: Fluke Corporation Brand: Fluke Model: BP120MH

Battery pack as replacement battery in the Fluke 120 series ScopeMeters and in the Fluke 43 and 43B power quality analyzers. The BP120MH is a Nickel-Metal-Hydride battery pack, made specifically to support the ScopeMeters and power quality analyzers mentioned. The battery capacity is 3000 mAh, this is 50 percent more than that of the original BP120. As a results, the instrument-user will benefit from a much longer 'up time' than with the original NiCd battery, at the same volume and weight. The BP120MH is more environmental-friendly than the NiCd battery used before, as it contains no heavy metals. Just as before, the battery pack can be charged while installed in the instrument, using the PM8907 power adapter/charger. Nominal voltage: 4.8V. Capacity: 3000 mAh.

Manufacturer: ANALOG DEVICES Brand: ANALOG DEVICES

ANALOG DEVICES ADM812RARTZ-REEL7 SUPERVISOR CIRCUIT, MPU, #1, SOT-143-4

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9768858

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: Trerice Brand: Trerice Model: 700LFSS

The Trerice 700 Series Industrial Gauge is designed for the varying needs of the world’s industrial applications. This gauge has a stainless steel case and ring. Its sturdy interior design and field liquid-fill capability (no kit required) provide the durability and accuracy required for industrial process environments. Available wetted parts are bronze tube with brass socket, stainless steel tube and socket, or Monel tube and socket.

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 8 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.2 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Gauge -25To+45 C

Manufacturer: Test Products International, Inc Brand: TPI Model: 605

Measure vacuum from 25 to 0 microns. Reads vacuum in seven international units of measure (Microns, PSI, InHg, mBar, Pascals, Torr, and mTorr). Display updates every 0.5 seconds. Auto power off after 10 minutes when vacuum above 12,000 microns (12 Torr). Built in hook for hanging. Wall hook and magnets for no-hand use. Cleanable sensor. 500 PSI overpressure. Thermistor sensor. Standard 1/4" NPT male connection. 12000 to 15 microns vacuum range. 10 percent accuracy. Microns, PSI, InHg, mBar, Pascals, Torr, mTorr units of measure. 32 to 104 degree F operating temperature. 1 micron resolution. Auto power off after 20 min. RoHS compliant.

Manufacturer: SSI Technologies Brand: SSI Technologies Model: MG1-5-A-9V-R Color: Black/Blue

Digital Pressure Gauge, 2 1/2" dial, Automatic Shutdown after 3 min, SS sensor. The Media Gauge is a multi-functional Digital gauge. Contains a media isolated piezo resistive pressure sensing element, signal conditioning, a 304 sensing port and LCD back lit display. A battery saver is incorporated to automatically shut the LCD display off after 3 minutes prolonging the batteries life. Chemical Capabilities: Any Gas or Liquid compatible with 304L stainless steel. For example: Motor Oils, Diesel, Hydraulics, Water, Nitrogen, Air.

Manufacturer: Dwyer Brand: Dwyer

Magnesense Differential Pressure Transmitter, 1", 2", 5" w.c. Range, 0-5VDC Output, Wall Mounting, Velocity Flow Mode, Local Display

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).