Flowmeters - Page 62

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec FM-200 series 4 - 20 gpm nutating disc mechanical fuel meter made from aluminum rated to 50 psi pressure with 3/4" NPT connection. Brand Name|Flomec#MFR Part Number|111200-20#UPC|031401111224#UNSPSC|41112501#Item|Mechanical Fuel Meter#Connection Size|3/4 Inch#Flow Rate|4 - 20 gpm#Pressure Rating|50 psi#Master Totalizer|999.9 gal Batch, 99999 gal Cumulative#Connection Type|NPT#Display Type|4-Digit Batch Total, 5-Digit Cumulative Total#Dimensions|5-1/2 Inch Width X 4-1/2 Inch Height X 5-1/2 Inch Depth#Material|Aluminum#Standard/Approvals|UL Listed

Manufacturer: COLE-PARMER Brand: Kobold

The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES Switch point adjustable Easy to install Brass or SS construction Maximum pressure: 1450/3600 PSI

Manufacturer: Fill-Rite Brand: Fill-Rite

1 1/2" METER 6-40 GPM

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Where a compact flowmeter is required to measure small volume air flows, the Dwyer® Model MMF is recommended. Easy to mount, they require a minimum of panel space. A white back on the flow tube makes the ball float easy to see. The scale is highly visible and easy to read. Scale graduations are printed on aluminum alongside the flow tube (not on it), so the position of ball float is instantly visible. The Model MMF's bezel type mounting is modern, attractive and quickly installed from the font of instrument panel. Two 1/4" OD mounting-connection tubes are integrally molded with flowmeter body. They can be back connected to flexible rubber or plastic tubing and held in place with two spring retainers which are furnished. If preferred, connections may be made to metal or rigid plastic tubing with a double compression fitting or nylon tube union such as Dwyer Part No. A-328. Excellent repeatability and ±10% accuracy make the MMF flowmeter an excellent value at its low cost. For additional selections of Dwyer® flowmeters, see the RM, VF & MM Series, also available on Amazon.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: ROLA-CHEM CORPORATION Brand: Rola-Chem Model: 570351T

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Visi-Float® flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowmeters are especially popular for medical and laboratory equipment applications. The front scale location and white background provides excellent visibility. The direct reading scales are hot stamped into the plastic and will not wear off. Mid-range calibration is established with a master flowmeter. Accuracy is ±5% of full scale for VFA models, ±3% for VFB. Scales average 2" long on the VFA models, 4" long on VFB. The machined acrylic bodies of the Visi-Float® flowmeters are practically unbreakable. Fabrication is backed by over 60 years of experience in acrylic instrument machining. The tapered bore is precision machined to a smooth surface that provides perfect visibility of the indicating float. The VFA and VFB models are available with either brass or stainless steel inlet and outlet connections and are tapped for 1/8" NPT thread. VFB models 85 and 86 have either 1/4" back or 3/8" end connections. All standard models employ Buna-N o-rings for leak proof operation and are available with either back or end connections for horizontal or vertical piping. Precision metering valves in brass or stainless steel are available for most VFA and VFB models. All Visi-Float® flowmeters have metal mounting inserts on rear for panel mounting. They can also be supported directly by system piping. (Standard range shown in picture).

Manufacturer: NMT Brand: Versamag

3/4 NMT Versamag Polymer Multijet Cold Water Meter with Couplings. Gallons register with pulse output. For use in submetering applications where compact size and pulse output are desired. The NMT Versamag multi-jet water meter uses a polymer body design to allow for low weight and reduced cost. The NMT Versamag may be installed either horizontally or vertically.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialists for quotes on acrylic meters with special requirements. What's Included: Flowmeter Meter with valve provides flow control through a highly durable meter body Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment Integrated precision valve allows precise manual flow across the full scale The flexible design allows for panel or bench mounting

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFB-83-SSV

The Visi–Float flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowmeters are especially popular for medical and laboratory equipment applications.