Flowmeters - Page 67

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Offering advanced features at low cost, the Dwyer® Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Visi-Float® flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowmeters are especially popular for medical and laboratory equipment applications. The front scale location and white background provides excellent visibility. The direct reading scales are hot stamped into the plastic and will not wear off. Mid-range calibration is established with a master flowmeter. Accuracy is ±5% of full scale for VFA models, ±3% for VFB. Scales average 2" long on the VFA models, 4" long on VFB. The machined acrylic bodies of the Visi-Float® flowmeters are practically unbreakable. Fabrication is backed by over 60 years of experience in acrylic instrument machining. The tapered bore is precision machined to a smooth surface that provides perfect visibility of the indicating float. The VFA and VFB models are available with either brass or stainless steel inlet and outlet connections and are tapped for 1/8" NPT thread. VFB models 85 and 86 have either 1/4" back or 3/8" end connections. All standard models employ Buna-N o-rings for leak proof operation and are available with either back or end connections for horizontal or vertical piping. Precision metering valves in brass or stainless steel are available for most VFA and VFB models. All Visi-Float® flowmeters have metal mounting inserts on rear for panel mounting. They can also be supported directly by system piping. (Standard range shown in picture).

Manufacturer: Bestcompu Brand: Generic

Specification: - Material, Aluminum - Connect Type: NPT ANS - Flow Range, 1/2" 1-10GPM (3.6-37.9LPM) 3/4"2-20GPM (7.6-75.7LPM) 1" 5-50GPM (18.9-190LPM) 11/2" 10-100GPM (38.0-380LPM 2" 20-200GPM (76-760LPM) - Accuracy, 1/2"±1.5% 3/4"±1.0% 1"±1.0% 11/2"±0.5% 2"±0.5% Notes: The meter can be used under 2 situations: - Working environment requires an oil pump or water pump above 0.1mA pressure; - Working environment needs the flow above 10 liters per minute. It can't be used to measure the small flow and water, but only measure diesel oil, gasoline. Package included: 1x Turbine Digital Diesel Fuel Flow Meter

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMB-85-SSV

line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Manufacturer: AQUAMATIC Brand: Aquamatic

NEW AQUAMATIC FLT-2-1/2 13905 2-1/2 IN 25-140GPM WATER FLOW CELL D531884

Manufacturer: Master Meter Brand: FA&M

3/4 Master Meter FAM Multijet Cold Water Meter with couplings. Gallons register with pulse output. Ideal for residential applications, these accurate and quiet operating meters, fit challenging inside sets - under counters, between studs, along pipes run against walls. Regardless of pipe angle, our patented design ensures the measuring chamber can always be positioned horizontally for maximum performance and accuracy. Retrofit without costly re-plumbing and discover submetering is a practical reality in locations where installation costs were previously thought to be cost-prohibitive.

Manufacturer: NMT Brand: Versamag

3/4 NMT Versamag Polymer Multijet Hot Water Meter with Couplings. Gallons register with pulse output. For use in submetering applications where compact size and pulse output are desired. The NMT Versamag multi-jet water meter uses a polymer body design to allow for low weight and reduced cost. The NMT Versamag may be installed either horizontally or vertically. The NVMP-5834H Versamag Hot Water Meter is rated for hot water up to 160 degrees F.